Epson EL 3S/33 Dimensions

PSB No.: S-0062I
Page: 1of 18
EPSON NX
VER PART # DESC TYPE LOC REASON
1.11.1.12
1.11.1.12 SYSTEM SETUP 27C010 27C512 U1 U113 INITIAL RELEASE
1.13.1.14
1.13.1.14 201311201 201311301 SYSTEM SETUP 27C010 27C512 U1 U113 Corrected jagged cursor display in interlaced mode with the BT-482
RAMDAC when using the hardware
cursor Wingine display drivers.
Serial BIOS has been expanded to
support COM3 and COM4. Parallel
BIOS has been corrected to provide
support for LPT1-LPT3. Corrected
inability to run SETUP when an
adaptec AHA-1540C or 1542C SCSI
host adapter is installed by modifying
POD to run external ROM
initialization routines just prior to
invocation of SETUP. Corrected
timing of parallel port STROBE signal
to allow for slow rise time and longer
cable lengths. Removed internal
cache test. The cache test failed,
regardless of cache condition. Since
the 80486 CPU perform internal
cache testing at power-up, disabling
the POD cache test will not affect
system performance. (SEE ECN
NO: PROG4-002) 12/03/93.
EL3S/33
VER PART # DESC TYPE LOC REASON
1.03 930219 PHOENIX 27C010 U19 INITIAL RELEASE