Epson Surecolor p6570d User manual

7 Open the top covers and remove the protective film from the print head

and any tape and protective material inside.

8 Close the top covers.

9 Remove the tape from the front of the printer and the paper catch

basket.

10 Open the ink cover and remove any protective material inside.

Note: Make sure to open all compartments and remove all tape and

protective materials from inside the printer before turning the printer on.

Otherwise, you may not be able to print.

Turn On and Configure

1 Connect the power cord to the back of the printer and plug the other

end into an outlet.

Note: If you are using the SSD (Solid State Drive) or Adobe®Embedded Print

Engine options, make sure to install them in the expansion slots on the back of

the printer before turning the printer on. (The Adobe Embedded Print Engine is

an option for the SureColor P6570DE/P6570E; it is pre-installed for all other

models. The SSD unit is an option for all models.)

2 Press the power button on the control panel to turn on the printer.

3 Select your language, date, and time on the touchscreen.

Note:

• You can change these settings later using the product’s control panel. For

more information, see the online User’s Guide.

• If an error code appears, turn off the printer and check that no protective

material has been left inside.

4 Follow the instructions on the touchscreen to begin ink initialization.

Epson®SureColor®P6570D/P6570DE/P6570E/P8570D/P8570DL

Start Here

IMPORTANT: Before using this product, make sure you read these instructions

and the safety instructions in the online User’s Guide.

The illustrations show the SureColor P8570D, but the steps are the same for all

models, unless otherwise specified.

Choose a Location for the Printer

Choose a location for the printer that is near a wall outlet where the power cord

can be easily unplugged. Avoid places subject to rapid changes in temperature

and humidity. Also keep the printer away from direct sunlight, strong light, or

heat sources.

Make sure to place the printer on a flat, stable surface capable of supporting

approximately 275 pounds (124.7 kg) (SureColor P6570E), 291 pounds

(131.8 kg) (SureColor P6570D/P6570DE), 395 pounds (179 kg) (SureColor

P8570D), or 440 pounds (199.5 kg) (SureColor P8570DL) and with enough

space on all sides (see illustration below).

2.75 in.

(70 mm)

7.67 in.

(195 mm)

2.95 in.

(75 mm)

24.84 in.

(631 mm)

46.06 in.

(1170 mm)

Model W D1

(Roll Paper)

(Cut Sheets/

Poster Board)

SureColor P8570D/P8570DL 78.46 in. (1993 mm)

44.48 in. (1130 mm) 157.48 in. (4000 mm)

maximum

SureColor P6570D/

P6570DE/P6570E 59.44 in. (1510 mm)

Note: If you are loading rigid poster board, the printer must be at least 30 inches

(762 mm) away from the wall.

Unpack and Place Printer

1 Make sure you have these items:

Printer

Ink cartridges (6)

(SureColor P6570D/

P6570DE/P6570E/P8570D)

Limited warrantyPower cord

Note: Ink supply units (ink packs) not included with the SureColor P8570DL

model.

2 Remove the outer carton from the pallet and printer and carefully lift

the printer off of the pallet.

WARNING: The printer requires four people to lift and move it. Make sure to

grip the printer as shown in the illustration.

3 Remove the protective plastic and all tape from the outside of the

printer.

4 Lock the front casters by pushing the tabs down.

5 Secure the two adjustable feet on the back of the printer.

Note: Turn the adjustable feet by hand until they touch the ﬂoor. If you turn

them 180° or more after they touch the ﬂoor, print quality may decline.

6 Remove the protective film from the touchscreen.

Note: The touchscreen will not operate if you do not remove the protective

ﬁlm.

Install Ink Cartridges

(SureColor P6570D/

P6570DE/P6570E/P8570D)

Caution: Keep the ink cartridges out of the reach of children and do not drink the ink.

Note:

• The printer is designed for use with Epson®cartridges only, not third-party

cartridges or ink.

• The cartridges included with the printer are designed for printer setup and not for

resale. After some ink is used for initializing, the rest is available for printing.

1 Open the ink cartridges and shake them as shown for 10 seconds, or

about 30 times.

Caution: Do not touch the green chip on top of the cartridge. Doing so may

prevent normal operation and printing.

2 Open the ink cover.

3 Insert the cartridges in the slot for each color as described on the label

inside the ink cover. Push the cartridges in until they click.

Note: Make sure all of the ink cartridges are properly inserted in the product;

otherwise printing is not possible.

4 Close the ink cover.

6 Slide the lock switch to the left to lock the ink tray. Repeat steps 1 to 6

to install the other ink packs.

7 Follow the instructions on the touchscreen to begin ink charging. When

you see a message on the touchscreen to load paper, ink charging is

complete.

Note: Make sure all of the ink trays are inserted in the product; otherwise

printing is not possible.

Caution: Do not turn off the printer, load paper, or open any covers while the printer

is charging or you'll waste ink.

Note: See the online User’s Guide for instructions on loading paper.

Install Software

Note: An internet connection is required to obtain the product software.

1 Download and run your product’s software package. For the latest

software, visit http://epson.com/support (U.S.),

http://epson.ca/support (Canada), or http://latin.epson.com/support

(Caribbean) and search for your product.

2 Follow the instructions on the screen to run the setup program.

3 When you see the Select Your Connection screen, select one of the

following and follow the on-screen instructions:

• Wired network connection

Make sure you have an Ethernet cable (not included).

• Wireless connection

In most cases, the software installer automatically attempts to set up

your wireless connection. If setup is unsuccessful, you may need to

enter your network name (SSID) and password.

• Direct USB connection

Make sure you have a USB 2.0 or 3.0 cable (not included).

Note: If you do not use a USB 2.0 or 3.0 cable, print speed and

performance may decline.

Mobile Printing

Connect wirelessly from your smartphone, tablet, or computer. Print documents

and photos from across the room or around the world:

• Print directly from your iOS device. Simply connect your printer and device

to the same network and tap the action icon to select the print option.

• Turn your mobile device into an intuitive, easy-to-use printing control

center with Epson Smart Panel®. Download the app from your mobile

device’s app store.

• Print directly from your AndroidTM (v4.4 or later) device*. Simply connect

your printer and device to the same network and tap the menu icon to select

the print option.

* May require the Epson Print Enabler or Mopria Print Service app from Google Play™.

5 The printer begins charging the ink delivery system. This takes about

23 minutes. When you see a message on the touchscreen to load paper,

ink charging is complete.

Caution: Do not turn off or unplug the printer or perform any other operations

during ink charging.

Note:

• You may need to replace the maintenance box (part number

C13S210115) soon after ink initialization. See the online User’s Guide

for instructions.

• See the online User’s Guide for instructions on loading paper.

Install Ink Supply Units (Ink Packs)

(SureColor P8570DL)

Caution: Keep the ink packs out of the reach of children and do not drink the ink.

1 Slide the lock switch to the right to unlock the ink tray.

2 Pull the ink tray out of the ink slot.

3 Insert the ink pack into the tray and push it down as shown.

Note: Make sure the ink pack ﬁts onto the pegs and is aligned with the top of

the tray.

4 While the ink pack is in the tray, carefully shake it by tilting it up and

down at about a 60 degree angle as shown.

5 Match the color on the ink pack label with the color slot on the printer

and insert the ink tray into the printer.

Note: The ink packs are keyed to ﬁt into the correct color slot. If you cannot

insert the ink tray all the way, do not force it. Make sure the ink pack color

matches the color slot on the printer.

Using the Touchscreen

11 10

654321

1Accesses printer settings

2Feeds or cuts media

3Turns on or off the printer’s interior light

4Switches the screen view to display additional information

5Displays maintenance settings

6Displays the network connection status

7Displays the printer’s status

8Opens platen to remove jammed paper

9Displays the Help menu

10 Displays network folder options

11 Selects paper size and type settings

Product Support

User’s Guide

Windows®:Click the icon on your desktop or Apps screen to access the online

User’s Guide.

Mac: Click the icon in Applications/Epson Software/Guide to access the online

User’s Guide.

If you don’t have a User’s Guide icon, go to the Epson website, as described in

“Epson technical support.”

Epson technical support

Visit http://epson.com/support (U.S.), http://epson.ca/support (Canada), or

http://latin.epson.com/support (Caribbean) and search for your product to

download software and utilities, view manuals, get FAQs and troubleshooting

advice, or contact Epson.

Epson provides technical support and information on the installation,

configuration, and operation of professional printing products through the

Epson PreferredSM Limited Warranty Plan. Dial (888) 377-6611, 7 am to 4 pm,

Pacific Time, Monday through Friday. Days and hours of support are subject to

change without notice. Before you call, make sure you have your:

• Printer serial number: ________________________________________

• Proof of purchase and date: ____________________________________

Note: If you experience difﬁculty with the toll-free line, call (562) 276-1305.

Recycling

Epson offers a recycling program for end of life hardware, ink packs, and ink

cartridges. Please go to http://epson.com/recycle (U.S.) or

http://epson.ca/recycle (Canada) for information on how to return your

products for proper disposal.

Need Ink?

You can purchase ink from an Epson authorized reseller. To find the nearest

reseller, call 800-GO-EPSON (800-463-7766).

SureColor P6570D/P6570DE/P6570E/P8570D

replacement ink cartridges

Color 110 ml 350 ml 700 ml

Photo Black T49A120 T48S120 T48L120

Cyan T49A220 T48S220 T48L220

Magenta T49A320 T48S320 T48L320

Yellow T49A420 T48S420 T48L420

Matte Black T49A820 T48S820 T48L820

Gray T49AE20 T48SE20 T48LE20

SureColor P8570DL replacement ink packs

Color 1600 ml

Photo Black T53E120

Cyan T53E220

Magenta T53E320

Yellow T53E420

Matte Black T53E820

Gray T53E720

Options and replacement parts

Option Part Number

Replacement Printer Cutter Blade C13S210117

Maintenance Box C13S210115

Borderless Maintenance Box C13S210116

Cleaning Stick C13S090013

SSD Unit C12C936671

Additional Roll Feed Spindle (44")

(SureColor P8570D/P8570DL) C12C936171

Additional Roll Feed Spindle (24")

(SureColor P6570D/P6570DE/P6570E) C12C937711

Production Stacker (44")

(SureColor P8570D/P8570DL) C12C937131

Production Stacker (24")

(SureColor P6570D/P6570DE/P6570E) C12C937731

Adobe Embedded Print Engine* C12C936151

* Optional for SureColor P6570DE/P6570E; included for all other models.

EPSON, Epson Smart Panel, and SureColor are registered trademarks and EPSON Exceed Your Vision

is a registered logomark of Seiko Epson Corporation.

Epson Preferred is a service mark of Epson America, Inc.

Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.

Mac is a trademark of Apple Inc., registered in the U.S. and other countries.

Android and Google Play are trademarks of Google LLC.

General Notice: Other product names used herein are for identification purposes only and may be

trademarks of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

Printed in U.S.A. CPD-61137