Epson EB-536Wi User manual

User’s Guide

Notations Used in This Guide
Safety indications
The documentation and the projector use graphical symbols to show how to use the projector safely.
The indications and their meaning are as follows. Make sure you understand them properly before reading the guide.
Warning
This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Caution
This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
General information indications
Attention
Indicates procedures which may result in damage or injury if sufficient care is not taken.
a
Indicates additional information and points which may be useful to know regarding a topic.
sIndicates a page where detailed information regarding a topic can be found.
g Indicates that an explanation of the underlined word or words in front of this symbol appears in the glossary of terms. See the "Glossary"
section of the "Appendix".
s"Glossary" p.186
[Name] Indicates the name of the buttons on the remote control or the control panel.
Example: [Esc] button
Menu Name Indicates Configuration menu items.
Example:
Select Brightness from Image.
Image - Brightness

Notations Used in This Guide ........................ 2
Introduction
ProjectorFeatures .......................................... 8
QuickandEasySetup,Projection,andStorage..........................8
ConnectingwithaUSBCableandProjecting(USBDisplay)................8
UsefulFunctionsforProjectingImages................................8
Connect a USB Storage Device and Project Movies or Images (PC Free) . . . . . . . . 8
FliptheImageHorizontallyandProject(FlipHorizontal) ..................8
VariousFunctionsforExcellentPowerSaving.........................8
MakingtheMostoftheRemoteControl .............................8
EnlargeandProjectYourFileswiththeDocumentCamera................9
EnhancedSecurityFunctions....................................9
TakingFullAdvantageofaNetworkConnection.........................9
InteractiveFeatures(EasyInteractiveFunction)(EB-536Wionly)..............10
PartNamesandFunctions .................................. 11
Front/Top ...................................................11
Rear .......................................................12
Base ...................................................... 14
ControlPanel ................................................15
RemoteControl ...............................................16
ReplacingtheRemoteControlBatteries............................18
RemoteControlOperatingRange................................19
Easy Interactive Pen (EB-536Wi only) . . . . . . . . ........................19
ReplacingtheBatteryfortheInteractivePen......................... 20
ReplacingtheTipoftheInteractivePen............................21
Preparing the Projector
Installing the Projector ..................................... 23
InstallationMethods...........................................23
InstallationMethods.........................................24
WhenUsingtheInteractiveFeatures(EB-536Wionly)...................24
Connecting Equipment ..................................... 26
ConnectingaComputer......................................... 26
ConnectingImageSources.......................................28
ConnectingUSBDevices .........................................30
ConnectingaMicrophone .......................................32
ConnectingExternalEquipment...................................33
ConnectingaLANCable .........................................35
InstallingtheOptionalWirelessLANUnit............................. 36
InstallingtheOptionalQuickWirelessConnectionUSBKey...............37
ConnectingMultipleProjectors(EB-536Wionly) .........................38
Basic Usage
ProjectingImages ......................................... 41
TurningOntheProjector........................................41
TurningOfftheProjector ........................................42
Automatically Detect Input Signals and Change the Projected Image (Source Search)
..........................................................43
SwitchingtotheTargetImageUsingtheRemoteControl..................44
ProjectingwithUSBDisplay......................................45
Systemrequirements .........................................45
ConnectingfortheFirstTime...................................46
Uninstalling...............................................47
AdjustingProjectedImages ................................ 48
CorrectingKeystoneDistortion.................................... 48
CorrectingManually.........................................49
CorrectingAutomatically(EB-536Wionly)...........................52
AdjustingtheImageSize........................................52
AdjustingtheImagePosition .....................................52
AdjustingtheHorizontalTilt ......................................52
CorrectingtheFocus ...........................................53
AdjustingtheVolume..........................................53
SelectingtheProjectionQuality(SelectingColorMode)...................53
SettingAutoIris..............................................54
ChangingtheAspectRatiooftheProjectedImage.......................55
ChangingMethods.......................................... 55
Contents
3

Changing the Aspect Mode (EB-536Wi/EB-535W/EB-525W only) ............ 55
ChangingtheAspectMode(EB-530/EB-520only) ......................56
Using the Interactive Features (EB-536Wi only)
InteractiveFeatureModes .................................. 59
DrawingonaProjectedImage(AnnotationMode).......................60
UsingtheProjectedScreenasaWhiteboard(WhiteboardMode).............61
Controlling a Computer from the Projected Screen (Computer Interactive Mode) . . 62
ComputerInteractiveModeSystemRequirements.....................62
UsingComputerInteractiveMode................................62
EasyInteractiveDriverSystemRequirements(OSXonly).................65
InstallingEasyInteractiveDriveronOSX ............................65
UsingtheInteractivePens .................................. 67
PenCalibration ...............................................68
CalibratingAutomatically......................................68
CalibratingManually.........................................69
AdjustingthePenOperationArea..................................71
Interacting with the Screen ................................. 74
SwitchingtheInteractiveMode.................................... 74
AnnotationModeandWhiteboardModeToolbars.......................75
SelectingLineWidthandColor..................................76
SelectingWhiteboardTemplates.................................77
ProjectorControlToolbar........................................77
SelectingNetworkDeviceDisplayfromtheProjectorControlToolbar........78
Using the Interactive Features overaNetwork ............... 80
PrecautionsWhenConnectingtoaProjectoronaDifferentSubnet...........80
Windows Pen Input and Ink Tools ........................... 82
EnablingWindowsPenInputandInkFeatures..........................82
UsingWindowsPenInputandInkFeatures............................ 83
Useful Functions
ProjectionFunctions ....................................... 85
ProjectingImagesStoredonaUSBStorageDevice(PCFree)................85
SpecificationsforFilesthatCanBeProjectedUsingPCFree............... 85
PCFreeExamples...........................................85
PCFreeOperatingMethods....................................86
ProjectingtheSelectedImagesorMovies ...........................87
ProjectingImageFilesinaFolderinSequence(Slideshow)...............88
ImageFileDisplaySettingsandSlideshowOperationSettings.............89
FlippingtheImageHorizontally(FlipHorizontal) ........................90
HidingtheImageandSoundTemporarily(A/VMute).....................90
FreezingtheImage(Freeze)......................................91
PointerFunction(Pointer) ........................................91
EnlargingPartoftheImage(E-Zoom)................................92
Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse) . . . . . . 93
SavingaUser'sLogo ...........................................95
SavingUserPattern............................................96
SecurityFunctions ......................................... 98
ManagingUsers(PasswordProtection)...............................98
KindsofPasswordProtection...................................98
SettingPasswordProtection ....................................98
EnteringthePassword........................................99
RestrictingOperation(ControlPanelLock)........................... 100
Anti-TheftLock .............................................. 101
InstallingtheWireLock ....................................... 101
Monitoring and Controlling ............................... 102
AboutEasyMPMonitor .........................................102
MessageBroadcasting....................................... 102
ChangingSettingsUsingaWebBrowser(WebControl) ...................102
ProjectorSetup ............................................ 102
DisplayingtheWebControlScreen.............................. 103
DisplayingtheWebRemotescreen.............................. 103
UsingtheMailNotificationFunctiontoReportProblems..................104
ReadingErrorNotificationMail................................. 105
ManagementUsingSNMP...................................... 105
Contents
4

ESC/VP21Commands..........................................106
Commandlist ............................................. 106
CableLayouts ............................................. 106
AboutPJLink................................................107
About Crestron RoomView
®
..................................... 108
OperatingaProjectorfromYourComputer......................... 108
Configuration Menu
Using the Configuration Menu ............................. 113
ListofFunctions .......................................... 114
ConfigurationMenuTable ...................................... 114
Networkmenu............................................ 115
ImageMenu ................................................ 116
SignalMenu................................................ 117
SettingsMenu............................................... 119
ExtendedMenu..............................................120
Easy Interactive Function Setting Items (EB-536Wi only) ................ 123
NetworkMenu.............................................. 124
NotesonOperatingtheNetworkMenu ............................125
SoftKeyboardOperations .....................................125
BasicMenu............................................... 126
WirelessLANMenu......................................... 127
SearchAccessPointscreen .................................... 129
SecurityMenu............................................. 129
WiredLANMenu ........................................... 130
MailMenu............................................... 131
OthersMenu..............................................132
ResetMenu ...............................................133
ECOMenu................................................. 133
InfoMenu(DisplayOnly)........................................134
ResetMenu .................................................135
PerformingBatchSetupforMultipleProjectors ............. 136
SettingUpUsingaUSBMemory .................................. 136
SavingSettingstoaUSBMemory................................136
ReflectingSavedSettingstoOtherProjectors........................ 137
Setup by Connecting the Computer and Projector with a USB Cable . . . . . . . . . . 138
SavingSettingstoaComputer ..................................138
ReflectingSavedSettingstoOtherProjectors........................ 139
WhenSetupFails .............................................140
Troubleshooting
UsingtheHelp ........................................... 142
ProblemSolving .......................................... 143
ReadingtheIndicators......................................... 143
WhentheIndicatorsProvideNoHelp............................... 147
ProblemsRelatingtoImages.....................................148
NoImagesAppear .......................................... 148
Moving Images are Not Displayed (Only the Moving Image Portion Turns Black) 149
ProjectionStopsAutomatically................................. 149
TheMessageNotsupportedisDisplayed.......................... 149
TheMessageNoSignalisDisplayed .............................. 150
ImagesareFuzzy,OutofFocus,orDistorted ........................ 150
InterferenceorDistortionAppearinImages ......................... 151
TheMouseCursorFlickers(OnlywhenProjectingUSBDisplay)............152
The Image Is Truncated (Large) or Small, or the Aspect Is Not Suitable . . . . . . . 152
ImageColorsareNotRight .................................... 153
ImagesAppearDark.........................................153
ProblemswhenProjectionStarts.................................. 154
TheProjectorDoesNotTurnOn................................. 154
OtherProblems..............................................154
NoSoundcanbeHeardortheSoundisFaint ........................154
NoSoundcanbeHeardfromtheMicrophone....................... 155
ThereisNoiseintheAudio(OnlywhenProjectingUSBDisplay)........... 155
TheRemoteControlDoesNotWork.............................. 156
IWanttoChangetheLanguageforMessagesandMenus............... 156
MailisNotReceivedevenifaProblemOccursintheProjector............ 156
CannotChangeSettingsUsingaWebBrowser....................... 157
Problems with the Interactive Features (EB-536Wi only) . . . . . . . . . . . . . . . . . . . 157
CannotDrawontheProjectedScreen ............................. 157
Contents
5

Cannot Operate a Computer from the Projected Screen After Connecting to the
Computer................................................158
The Message An error occurred in the Easy Interactive Function. is Displayed . . 158
Computer'sMouseDoesNotWorkCorrectly........................ 158
TheInteractivePenDoesNotWork............................... 159
The Response Time for the Interactive Pen is Slow (Only when Projecting USB
Display)................................................. 159
The Dot Moves Automatically or Does Not Move to the Next Position During
ManualCalibration..........................................160
AboutEventID ........................................... 161
Maintenance
Cleaning ................................................. 163
CleaningtheProjector'sSurface ...................................163
CleaningtheLens............................................ 163
CleaningtheAirFilter..........................................163
ReplacingConsumables ................................... 166
ReplacingtheLamp ........................................... 166
LampReplacementPeriod.................................... 166
HowtoReplacetheLamp..................................... 166
ResettingtheLampHours ..................................... 169
ReplacingtheAirFilter ......................................... 169
AirFilterReplacementPeriod .................................. 169
HowtoReplacetheAirFilter................................... 169
Appendix
OptionalAccessoriesandConsumables .................... 172
OptionalAccessories.......................................... 172
Consumables ............................................... 172
Screen Size and Projection Distance ........................ 173
Projection Distance (for EB-536Wi/EB-535W/EB-525W) ................... 173
ProjectionDistance(ForEB-530/EB-520)............................. 174
SupportedMonitorDisplays ............................... 176
SupportedResolutions ......................................... 176
ComputerSignals(analogRGB)................................. 176
ComponentVideo .......................................... 176
CompositeVideo ........................................... 176
InputSignalfromtheHDMIPort................................ 176
Specifications ............................................ 178
ProjectorGeneralSpecifications ................................... 178
Appearance .............................................. 184
Glossary ................................................. 186
GeneralNotes ............................................ 188
WirelessTelegraphyActRegulations............................... 188
AboutNotations ............................................. 188
GeneralNotice: .............................................. 189
Index .................................................... 190
Contents
6

Introduction
This chapter explains the projector's features and the part names.

Quick and Easy Set up, Projection, and Storage
Turn the projector on and off by simply plugging in or unplugging.
Projection only starts when a computer image is input (Auto Power
On).
Project onto large screens from a short distance.
Make easy height adjustments with one lever.
No cool down delay makes it easy to put away.
Connecting with a USB Cable and Projecting (USB Display)
By simply connecting a USB cable, you can
project images from a computer's screen
without a Computer cable.
s"Projecting with USB Display" p.45
Useful Functions for Projecting Images
Connect a USB Storage Device and Project Movies or Images (PC
Free)
You can connect USB storage devices or digital cameras to the projector
and project saved images.
A wide range of file formats are supported such as movies or images.
s"Projecting Images Stored on a USB Storage Device (PC Free)"
p.85
Flip the Image Horizontally and Project (Flip Horizontal)
You can temporarily flip the image horizontally and project. This is useful
when projecting images for dance lessons and so on.
s"Flipping the Image Horizontally (Flip Horizontal)" p.90
Various Functions for Excellent Power Saving
Various functions to prevent wasting electricity
The projector comes with a number of built-in functions to save power
such as dimming the projected image, an auto power off timer, and
adjusting power consumption while the projector is standing by.
s"ECO Menu" p.133
Function for displaying the power-saving status on the projected screen
When ECO Display is set to On from the Configuration menu, leaf icons
() that indicate the power-saving status are displayed at the bottom-
left of the projected screen when the lamp brightness has switched to low
brightness.
sECO - ECO Display p.133
Making the Most of the Remote Control
You can use the remote control to perform operations such as enlarging
part of the image. You can also use the remote control as a pointer during
presentations or as a mouse for the computer.
s"Pointer Function (Pointer)" p.91
s"Enlarging Part of the Image (E-Zoom)" p.92
s"Using the Remote Control to Operate the Mouse Pointer (Wireless
Mouse)" p.93
Projector Features
8

Enlarge and Project Your Files with the Document Camera
You can project paper documents and objects using the optional Document
Camera.
By connecting to a computer and using the software supplied, you can
make full use of the projector's capabilities.
s"Optional Accessories" p.172
Enhanced Security Functions
Password Protect to restrict and manage users
By setting a Password you can restrict who can use the projector.
s"Managing Users (Password Protection)" p.98
Control Panel Lock to restrict button operation on the control panel
You can use this to prevent people changing projector settings without
permission at events, in schools, and so on.
s"Restricting Operation (Control Panel Lock)" p.100
Equipped with various anti-theft devices
The projector is equipped with the following types of anti-theft security
devices.
Security slot
Security cable installation point
s"Anti-Theft Lock" p.101
Taking Full Advantage of a Network Connection
You can perform the following operations by using EasyMP Network
Projection and EasyMP Multi PC Projection that can be found on the
EPSON Projector Software CD-ROM.
Sharing the projector over a network
By using EasyMP Network Projection, you
can connect the projector to a network and
share it with multiple computers. You can
project images and data from each computer
without having to reconnect cables. You can
also project to multiple projectors from one
computer.
sEasyMP Network Projection Operation
Guide
Projecting images from multiple computers simultaneously
By using EasyMP Multi PC Projection, up to
four screens from multiple computers
connected to the network, or from
smartphones or tablets with Epson
iProjection installed, can be projected
simultaneously.
By making yourself the host of a meeting, you
can control the projected screens from other
connected computers allowing you to
advance the meeting smoothly.
You can also project the same screen from
remote projectors on the network.
sEasyMP Multi PC Projection Operation
Guide
Projector Features
9

You can perform the following operations by using optional devices and
applications.
Wirelessly projecting your computer's screen
By installing the optional Wireless LAN unit,
you can project a computer screen over a
network.
s"Installing the Optional Wireless LAN
Unit" p.36
Connecting to a computer with Quick Wireless easily
By simply connecting the optional Quick
Wireless Connection USB Key to a computer,
you can automatically perform network
settings for a wireless LAN connection, and
project the computer's screen (Windows
only).
Projecting images from portable devices over a network
If Epson iProjection is installed on your smart
phone or tablet device, you can wirelessly
project data from the device. You can
download Epson iProjection for free from the
App Store or from Google play. Any fees
incurred when communicating with the App
Store or Google play are the responsibility of
the customer.
Interactive Features (Easy Interactive Function)
(EB-536Wi only)
You can perform the following operations with the interactive pen.
Use the projected screen as a whiteboard
Draw on content projected from a computer
Operate a computer from the projected screen
Operate the projector from the projected screen
Select devices on the projected screen that have been connected to the
network using the supplied EasyMP Multi PC Projection
Use the interactive features over a network using the supplied EasyMP
Network Projection or the optional Quick Wireless
s"Using the Interactive Features (EB-536Wi only)" p.58
Projector Features
10

The illustrations currently used in this guide are for the EB-536Wi.
Front/Top
Name Function
ARemote receiver Receives signals from the remote control.
BEasy Interactive Func-
tion receiver
(EB-536Wi only)
Receives signals from the interactive pen.
s"Using the Interactive Features (EB-536Wi only)"
p.58
Name Function
CFoot adjust lever Press the foot adjust lever to extend and retract the front
adjustable foot.
s"Adjusting the Image Position" p.52
DFront adjustable foot When setup on a surface such as a desk, extend the foot to
adjust the position of the image.
s"Adjusting the Image Position" p.52
EProjection lens Projects images.
FAir intake vent
(Air filter)
Takes in air to cool the projector internally.
s"Cleaning the Air Filter" p.163
s"Replacing the Air Filter" p.169
GHorizontal keystone
adjuster (EB-536Wi
only)
Corrects horizontal distortion in the projected image.
s"Correcting Manually" p.49
HFocus ring Adjusts the image focus.
s"Correcting the Focus" p.53
IControl Panel Operates the projector.
s"Control Panel" p.15
JLamp cover Open when replacing the projector's lamp.
s"Replacing the Lamp" p.166
Part Names and Functions
11

Name Function
KAir exhaust vent Exhaust vent for air used to cool the projector internally.
Warning
Do not look into the vents. If the lamp explodes,
gases may escape and small fragments of glass may
be scattered which could cause an injury. Contact a
doctor if any fragments of broken glass are inhaled
or get into the eyes or mouth.
Caution
While projecting, do not put your face or hands
near the air exhaust vent, and do not place objects
that may become warped or damaged by heat near
the vent.
L[A/V Mute] button Turns the video and audio on or off.
s"Hiding the Image and Sound Temporarily (A/V
Mute)" p.90
Hold down the button for approximately three seconds
to perform auto pen calibration (EB-536Wi only).
MLens cover Install when not using the projector to protect the lens
from being damaged or soiled.
Rear
Name Function
APower inlet Connects the power cord to the projector.
s"Turning On the Projector" p.41
BS-Video port For S-video signals from video sources.
CRS-232C port When controlling the device from a computer, connect it
to the computer with an RS-232C cable. This port is for
control use and should not normally be used.
s"ESC/VP21 Commands" p.106
DVideo port Inputs composite video signals from video sources.
EAudio-L/R port Inputs audio from equipment connected to the S-Video
port or the Video port.
FMic port Inputs audio from the microphone.
s"Connecting a Microphone" p.32
GMonitor Out port Outputs analog RGB signals input from the Computer1
port to an external monitor. You cannot output signals
input from other ports or component video signals.
HAudio1 port Inputs audio from equipment connected to the
Computer1 port.
Part Names and Functions
12

Name Function
IAudio Out port Outputs audio from the currently projected image to an
external speaker.
JAudio2 port Inputs audio from equipment connected to the
Computer2 port.
KSYNC IN/OUT port
(EB-536Wi only)
When installing multiple projectors in the same room and
using the interactive function, connect projectors using
the optional Remote control cable set (ELPKC28). Easy
Interactive Pen operations are stabilized when connected.
s"Connecting Multiple Projectors (EB-536Wi only)"
p.38
LSpeaker Outputs audio.
MHDMI port Inputs video signals from HDMI compatible video
equipment and computers. This projector is compatible
with HDCP
g .
s"Connecting Image Sources" p.28
NComputer2 port Inputs image signals from a computer and component
video signals from other video sources.
OComputer1 port
PRemote receiver Receives signals from the remote control.
QLAN port Connects a LAN cable to connect to a network.
RUSB-B port Connects the projector to a computer using a USB cable,
and projects the images on the computer.
s"Projecting with USB Display" p.45
Connects the projector to a computer using a USB cable
to use the Wireless Mouse function.
s"Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.93
When operating the mouse using the Easy Interactive
Pen, connect to the computer with the supplied USB
cable (EB-536Wi only).
s"Controlling a Computer from the Projected
Screen (Computer Interactive Mode)" p.62
Name Function
SUSB-A port Connects a USB storage device or a digital camera, and
projects images using PC Free.
s"Projecting Images Stored on a USB Storage
Device (PC Free)" p.85
Connects the optional Document Camera.
Connects the optional Wireless LAN unit.
s"Installing the Optional Wireless LAN Unit"
p.36
Connects the optional Quick Wireless Connection USB
Key.
s"Installing the Optional Quick Wireless
Connection USB Key" p.37
TWireless LAN unit
fixing screw
This screw secures the wireless LAN unit cover.
Part Names and Functions
13

Base
Name Function
ACeiling mount fixing
points (three points)
Attach the optional Ceiling mount here when suspending
the projector from a ceiling.
s"Installing the Projector" p.23
s"Optional Accessories" p.172
Name Function
BWall mount plate
fixing points (five
points)
When attaching to a wall, attach the optional wall mount
fixing plate.
s"Optional Accessories" p.172
CSecurity cable
installation point
Pass a commercially available wire lock through here and
lock it in place.
s"Installing the Wire Lock" p.101
DRear feet When setup on a surface such as a desk, turn to extendand
retract to adjust the horizontal tilt.
s"Adjusting the Horizontal Tilt" p.52
EFront adjustable foot When setup on a surface such as a desk, extend the foot to
adjust the position of the image.
s"Adjusting the Image Position" p.52
Part Names and Functions
14

Control Panel
Name Function
AIndicators Indicates the projector's status using color, and by being lit
or flashing.
s"Reading the Indicators" p.143
B[Source Search]
button
Switches to the image from the input port where video
signals are being input.
s"Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.43
C[Enter] button
[]
When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
If pressed while projecting analog RGB signals from the
Computer1 port or Computer2 port, automatically
optimizes the image by adjusting the Tracking, Sync.,
and Position.
Name Function
D[w][v] buttons Perform keystone correction.
s"H/V-Keystone" p.49
If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s"Using the Configuration Menu" p.113
s"Using the Help" p.142
E[Help] button Displays and closes the Help screen which shows you how
to deal with problems if they occur.
s"Using the Help" p.142
F[Esc] button Stops the current function.
If pressed when the Configuration menu is displayed, it
moves to the previous menu level.
s"Using the Configuration Menu" p.113
G[Tele]/[Wide] buttons Adjusts the size of the projection screen. Press the [Tele]
button to reduce the size of the projection screen and
press the [Wide] button to increase the size of the
projection screen.
Corrects keystone distortion in the horizontal direction
when the Keystone screen is displayed.
s"H/V-Keystone" p.49
If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s"Using the Configuration Menu" p.113
s"Using the Help" p.142
H[Menu] button Displays and closes the Configuration menu.
s"Using the Configuration Menu" p.113
I[Power] button
[t]
Turns the projector power on or off.
s"Turning On the Projector" p.41
Part Names and Functions
15

Remote Control Name Function
A[Power] button
[t]
Turns the projector power on or off.
s"Turning On the Projector" p.41
B[Computer] button Each time you press the button, the input changes between
images from the Computer1 port and the Computer2
port.
C[Video] button Each time the button is pressed, the image cycles through
the S-Video, Video, and HDMI ports.
DNumeric buttons Enter the Password.
s"Setting Password Protection" p.98
Use this button to enter numbers in Network settings
from the Configuration menu.
E[Auto] button If pressed while projecting analog RGB signals from
Computer1 port or Computer2 port, you can
automatically optimize Tracking, Sync., and Position.
F[Aspect] button Each time the button is pressed, the aspect mode changes.
s"Changing the Aspect Ratio of the Projected Image"
p.55
G[Num] button Hold down this button and press the numeric buttons to
enter passwords and numbers.
s"Setting Password Protection" p.98
H[Menu] button Displays and closes the Configuration menu.
s"Using the Configuration Menu" p.113
Part Names and Functions
16

Name Function
I[][ ][ ][ ]
buttons
When the Configuration menu or the Help screen is
displayed, pressing these buttons selects menu items
and setting values.
s"Using the Configuration Menu" p.113
When projecting using PC Free, pressing these buttons
displays the previous/next image, rotates the image, and
so on.
s"Projecting Images Stored on a USB Storage
Device (PC Free)" p.85
During Wireless Mouse function, the mouse pointer
moves in the direction of the button that was pushed.
s"Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.93
J[Enter] button
[]
When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
s"Using the Configuration Menu" p.113
Acts as a mouse's left button when using the Wireless
Mouse function.
s"Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.93
K[User] button Select any frequently used item from the available
Configuration menu items, and assign it to this button. By
pressing the [User] button, the assigned menu item
selection/adjustment screen is displayed, allowing you to
make one-touch settings/adjustments.
s"Settings Menu" p.119
The following menu items are assigned by default.
For EB-536Wi: Auto Calibration
For EB-535W/EB-525W/EB-530/EB-520: Power
Consumption
Name Function
L[Page] buttons
[[][]]
Changes pages in files such as PowerPoint files when using
the following projection methods.
When using the Wireless Mouse function
s"Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.93
When using USB Display
s"Projecting with USB Display" p.45
When connecting to a network
When projecting images using PC Free, pressing these
buttons displays the previous/next screen.
M[E-Zoom] button
[z][x]
Enlarges or reduces the image without changing the
projection size.
s"Enlarging Part of the Image (E-Zoom)" p.92
N[A/V Mute] button Turns the video and audio on or off.
s"Hiding the Image and Sound Temporarily (A/V
Mute)" p.90
You can change the Projection mode as follows by
pressing the button for about five seconds.
Front WFront/Upside Down
Rear WRear/Upside Down
OStrap attachment hole Allows you to attach a commercially available strap to the
remote control.
P[Help] button Displays and closes the Help screen which shows you how
to deal with problems if they occur.
s"Using the Help" p.142
Q[Freeze] button Images are paused or unpaused.
s"Freezing the Image (Freeze)" p.91
R[Volume] button
[a][b]
[a] Decreases the volume.
[b] Increases the volume.
s"Adjusting the Volume" p.53
S[Pointer] button Displays the on-screen pointer.
s"Pointer Function (Pointer)" p.91
Part Names and Functions
17

Name Function
T[Esc] button Stops the current function.
If pressed when the Configuration menu is displayed, it
moves to the previous level.
s"Using the Configuration Menu" p.113
Acts as a mouse's right button when using the Wireless
Mouse function.
s"Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.93
U[Pen Mode] button (Only available in EB-536Wi)
Changes between operating the computer or drawing
using the interactive pen.
s"Using the Interactive Features (EB-536Wi only)"
p.58
V[Color Mode] button Each time the button is pressed, the color mode changes.
s"Selecting the Projection Quality (Selecting Color
Mode)" p.53
W[MHL Menu] button Not available on this device.
X[LAN] button Switches to the image from the network connected device.
Y[USB] button Each time the button is pressed, it cycles through the
following images:
USB Display
Images from the device connected to the USB-A port
Z[Source Search]
button
Switches to the image from the input port where video
signals are being input.
s"Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.43
aRemote control light-
emitting area
Outputs remote control signals.
Replacing the Remote Control Batteries
If the remote control becomes unresponsive or inoperable after it has been
used for some time, the batteries may have reached the end of their service
life. When this happens, replace them with new batteries. Obtain two AA
size manganese or alkaline batteries. You cannot use other batteries except
for the AA size manganese or alkaline.
Attention
Make sure you read the following manual before handling the batteries.
sSafety Instructions
a
Remove the battery cover.
While pushing the battery cover catch, lift the cover up.
b
Replace the old battery with a new battery.
Slide the batteries in negative side first.
Part Names and Functions
18

Caution
Check the positions of the (+) and (-) marks inside the battery holder to
ensure the batteries are inserted the correct way.
If the batteries are not used correctly, they could explode or leak causing
a fire, injury, or damage to the product.
c
Replace the battery cover.
Press the battery cover until it clicks into place.
Remote Control Operating Range
Easy Interactive Pen (EB-536Wi only)
There are two types of interactive pens with different colored bottom
sections. You cannot use interactive pens with the same colored bottom
sections at the same time.
s"Optional Accessories" p.172
Part Names and Functions
19

Name Function
APen Tip Turn on the interactive pen. When turned on, it takes
approximately one second before the interactive pen is
operational.
Hold the pen close to the projected image, and press to
use.
s"Using the Interactive Features (EB-536Wi only)"
p.58
s"Optional Accessories" p.172
BBattery light Press the button on the side of the pen to indicate the
remaining battery power.
When the battery is charged, the light is lit green until
you release the button.
When the battery is running low, the light flashes green
until you release the button.
Does not light when the battery is exhausted. Change
the batteries.
s"Replacing the Battery for the Interactive Pen" p.20
CButton Turn on the interactive pen. When turned on, it takes
approximately one second before the interactive pen is
operational.
Name Function
DAttachment for
optional strap or cord
Allows you to attach a commercially available strap.
EBattery cover Open this cover when replacing the battery.
s"Replacing the Battery for the Interactive Pen" p.20
a
The interactive pen turns off automatically after 20 minutes of
inactivity.
To use the pen again, tap the pen tip or press the button on the side
to turn on the power.
Replacing the Battery for the Interactive Pen
When you press the button, the battery light on the interactive pen lights or
flashes. Does not light or flash when the battery is exhausted. When the
light no longer lights or flashes, replace the battery. Use one of the
following types of battery. Other chargeable batteries cannot be used.
AA size manganese battery
AA size alkaline manganese battery
eneloop
®
*
(HR-3UTG/HR-3UTGA/HR-3UTGB/BK-3MCC)
*eneloop
®
is a registered trademark of the Panasonic Group.
Attention
Make sure you read the following manual before handling the batteries.
sSafety Instructions
Part Names and Functions
20