Epson EB-D6250 User manual

User’s Guide

Notations Used in This Guide
•Safety indications
The documentation and the projector use graphical symbols to show how to use the projector safely.
Please understand and respect these caution symbols in order to avoid injury to persons or property.
Warning
This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Caution
This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
•General information indications
Attention
Indicates procedures which may result in damage or injury if sufficient care is not taken.
a
Indicates additional information and points which may be useful to know regarding a topic.
sIndicates a page where detailed information regarding a topic can be found.
g Indicates that an explanation of the underlined word or words in front of this symbol appears in the glossary of terms. See the "Glossary"
section of the "Appendix".
s"Glossary" p.136
[Name] Indicates the name of the buttons on the remote control or the control panel.
Example: [Esc] button
"(Menu Name)" Indicates Configuration menu items.
Example:
Select Brightness from Image.
Image - Brightness

Notations Used in This Guide ........................ 2
Introduction
ProjectorFeatures .......................................... 7
UsabilityandReliability..........................................7
ProjectionFunctions ............................................7
Projectingtwoimagessimultaneously(SplitScreen)....................7
Connecting to a network and projecting images from the computer's screen
.........................................................7
EasyconnectiontoacomputerwithQuickWireless.....................8
SecurityFunctions..............................................8
Part Names and Functions ................................... 9
Front/Top ...................................................9
Rear.......................................................10
Base......................................................11
ControlPanel................................................12
RemoteControl...............................................13
Replacingtheremotecontrolbatteries.............................15
Remotecontroloperatingrange.................................16
Preparing the Projector
Installing the Projector ..................................... 18
InstallationMethods ...........................................18
Howtoinstall ..............................................18
ScreenSizeandApproximateProjectionDistance.......................19
Connecting Equipment ..................................... 20
ConnectingaComputer.........................................20
ConnectingImageSources.......................................21
ConnectingUSBDevices.........................................24
ConnectingExternalDevices ...................................... 25
ConnectingaLANCable.........................................26
InstallingtheWirelessLANUnit .................................... 27
AttachingandRemovingtheCableCover.............................27
Attaching .................................................27
Removing ................................................. 28
Basic Usage
ProjectingImages ......................................... 30
FromInstallationtoProjection.....................................30
Automatically Detect Input Signals and Change the Projected Image (Source Search)
..........................................................31
SwitchingtotheTargetImagebyRemoteControl.......................32
AdjustingProjectedImages ................................ 33
CorrectingKeystoneDistortion ....................................33
H/V-Keystone..............................................33
QuickCorner...............................................34
AdjustingtheImageSize........................................36
AdjustingtheImagePosition .....................................36
CorrectingtheFocus ...........................................36
AdjustingtheVolume..........................................37
SelectingtheProjectionQuality(SelectingColorMode)...................37
SettingAutoIris..............................................38
ChangingtheAspectRatio.......................................39
Changingmethods.......................................... 39
Changingtheaspectmode(EB-D6155Wonly)........................39
Changingtheaspectmode(EB-D6250/EB-D6150only)..................40
Useful Functions
ProjectionFunctions ....................................... 43
ProjectingTwoImagesSimultaneously(SplitScreen).....................43
InputsourcesforSplitScreenprojection ............................ 43
ProjectingonaSplitScreen ..................................... 43
ChangingtheProjectedImage..................................44
Switchingtheleftandrightscreens...............................44
Contents
3

Switchingtheleftandrightimagesizes............................45
ChangingtheAudio..........................................46
EndingSplitScreen ..........................................47
RestrictionsduringSplitScreenProjection..........................47
HidingtheImageandSoundTemporarily(A/VMute).....................47
FreezingtheImage(Freeze)......................................48
PointerFunction(Pointer) ........................................48
EnlargingPartoftheImage(E-Zoom)................................49
Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse) . . . . . . 50
SettingtheIDandUsingtheRemoteControl ...........................51
SettingtheProjectorID.......................................52
SettingtheremotecontrolID ................................... 53
CorrectingColorwhenProjectingfromMultipleProjectors.................53
Summaryofcorrectionprocedure................................54
Correcting ................................................54
SavingaUser'sLogo...........................................55
SecurityFunctions ......................................... 57
ManagingUsers(PasswordProtect).................................57
KindsofPasswordProtect......................................57
SettingPasswordProtect......................................57
EnteringthePassword........................................58
RestrictingOperation(ControlPanelLock)............................59
Anti-TheftLock...............................................60
Installingthewirelock........................................60
Configuration Menu
Using the Configuration Menu .............................. 62
ListofFunctions ........................................... 63
ConfigurationMenuTable.......................................63
ImageMenu ................................................. 65
SignalMenu .................................................66
SettingsMenu ................................................68
ExtendedMenu ...............................................69
NetworkMenu...............................................71
NotesonoperatingtheNetworkmenu.............................71
Softkeyboardoperations......................................72
Basicmenu ................................................73
WirelessLANmenu..........................................74
Securitymenu.............................................. 75
WiredLANMenu ............................................77
Mailmenu................................................78
Othersmenu..............................................78
ResetMenu...............................................79
InfoMenu(DisplayOnly)........................................80
ResetMenu................................................. 81
Troubleshooting
UsingtheHelp ............................................. 83
ProblemSolving ........................................... 84
ReadingtheIndicators..........................................84
WhentheIndicatorsProvideNoHelp................................88
ProblemsRelatingtoImages ......................................89
Noimagesappear ...........................................89
Moving images are not displayed (only the moving image portion turns black)
........................................................89
Projectionstopsautomatically................................... 90
Themessage"Notsupported"isdisplayed...........................90
Themessage"NoSignal"isdisplayed. ..............................90
Imagesarefuzzy,outoffocus,ordistorted..........................91
Interferenceordistortionappearinimages..........................91
The image is truncated (large) or small, or the aspect is not suitable . . . . . . . . . 92
Imagecolorsarenotright......................................93
Imagesappeardark..........................................93
ProblemswhenProjectionStarts...................................94
Theprojectordoesnotturnon..................................94
OtherProblems...............................................94
Nosoundcanbeheardorthesoundisfaint.........................94
Theremotecontroldoesnotwork................................95
Nothingappearsontheexternalmonitor...........................95
Contents
4

Iwanttochangethelanguageformessagesandmenus.................96
Mailisnotreceivedevenifanerroroccurswiththeprojector.............96
About Event ID ............................................ 97
Maintenance
Cleaning .................................................. 99
CleaningtheProjector'sSurface...................................99
CleaningtheLensCoverGlass.....................................99
CleaningtheAirFilter ...........................................99
Howtocleantheairfilter......................................99
ReplacingConsumables ................................... 102
ReplacingtheLamp........................................... 102
Lampreplacementperiod .....................................102
Howtoreplacethelamp......................................102
Resettingthelamphours ..................................... 105
ReplacingtheAirFilter ......................................... 105
Airfilterreplacementperiod................................... 105
Howtoreplacetheairfilter .................................... 106
Appendix
Slideshow ................................................ 109
ProjectingWithoutaComputer(Slideshow).......................... 109
SpecificationsforfilesthatcanbeprojectedusingSlideshow.............109
Slideshowexamples.........................................109
Slideshowoperatingmethods.................................. 109
Projectingtheselectedimage.................................. 111
Projectingimagefilesinafolderinsequence(Slideshow)............... 112
Image file display settings and Slideshowoperationsettings............. 113
Monitoring and Controlling ............................... 114
AboutEasyMPMonitor .........................................114
ChangingSettingsUsingaWebBrowser(WebControl)...................114
Projectorsetup............................................ 114
DisplayingtheWebControlscreen...............................115
DisplayingtheWebRemotescreen.............................. 115
UsingtheMailNotificationFunctiontoReportProblems.................. 116
ReadingErrorNotificationMail................................. 117
ManagementUsingSNMP ...................................... 117
ESC/VP21Commands..........................................118
Commandlist............................................. 118
Cablelayouts............................................. 118
AboutPJLink ................................................119
About Crestron RoomView
®
..................................... 120
Operatingaprojectorfromyourcomputer......................... 120
Optional Accessories and Consumables .................... 124
OptionalAccessories .......................................... 124
Consumables............................................... 124
Screen Size and Projection Distance ........................ 125
ProjectionDistanceforEB-D6155W................................ 125
Projection Distance for EB-D6250/EB-D6150 . . . . . . . . . . . . . . . . . . . . . . . . . . 126
SupportedMonitorDisplays ............................... 128
SupportedResolutions ......................................... 128
Computersignals(analogRGB) ................................. 128
ComponentVideo.......................................... 128
Compositevideo........................................... 128
InputsignalfromtheHDMIport ................................ 128
Specifications ............................................ 130
ProjectorGeneralSpecifications...................................130
Appearance .............................................. 134
Glossary ................................................. 136
GeneralNotes ............................................ 138
AboutNotations............................................. 138
GeneralNotice:.............................................. 138
Index .................................................... 156
Contents
5

Introduction
This chapter explains the projector's features and the part names.

Usability and Reliability
•Air exhaust vent shutter to prevent dust from entering the projector.
•Large filter to increase dust resistance.
•Built-in function to notify you when it is time to clean the filter.
•Turn the projector on and off by simply plugging in or unplugging.
Projection Functions
Projecting two images simultaneously (Split Screen)
You can project two types of image source
simultaneously. This increases the range of
applications, such as when holding a video
conference while projecting presentation
materials.
s"Projecting Two Images Simultaneously
(Split Screen)" p.43
Connecting to a network and projecting images from the
computer's screen
You can connect the projector to a computer on
a network and project the computer's screen
using the supplied EasyMP Network Projection
(application software).
sEasyMP Network Projection Operation
Guide
Projector Features
7

Easy connection to a computer with Quick Wireless
By simply connecting the optional Quick
Wireless Connection USB Key to a computer,
you can connect the projector and the computer
using wireless communication and project
images from the computer. (Windows
computers only)
Security Functions
•Password Protect to restrict and manage users
s"Managing Users (Password Protect)" p.57
•Control Panel Lock restricts button operation on the control panel
s"Restricting Operation (Control Panel Lock)" p.59
•Equipped with various anti-theft devices
s"Anti-Theft Lock" p.60
Projector Features
8

Front/Top
Name Function
AAir exhaust vent
(Air exhaust vent
shutter)
Exhaust vent for air used to cool the projector internally.
Caution
While projecting, do not put your face or hands
near the air exhaust vent, and do not place objects
that may become warped or damaged by heat near
the vent.
Name Function
BIndicators Indicates the projector's status.
s"Reading the Indicators" p.84
CRemote receiver Receives signals from the remote control.
DZoom/Focus ring
cover
Only slide this open when operating the zoom ring or the
focus ring. This should normally be kept closed to prevent
dust from entering the projector.
EFoot adjust lever Press the foot lever to extend and retract the front foot.
s"Adjusting the Image Position" p.36
FFront adjustable foot When setup on a surface such as a desk, extend the foot to
adjust the position of the image.
s"Adjusting the Image Position" p.36
GLens cover glass Protects the projector's lens.
HSpeaker Outputs audio.
IAir intake vent
(air filter)
Takes in air to cool the projector internally.
s"Cleaning the Air Filter" p.99
JWireless LAN indicator Displays the access status of the optional Wireless LAN
unit.
KZoom ring Adjusts the image size.
s"Adjusting the Image Size" p.36
LFocus ring Adjusts the image focus.
s"Correcting the Focus" p.36
MCable cover Cover for the rear interface cable connection section.
s"Attaching and Removing the Cable Cover" p.27
NControl panel Operates the projector.
s"Control Panel" p.12
OLamp cover Open when replacing the projector's lamp.
s"Replacing the Lamp" p.102
Part Names and Functions
9

Rear
Name Function
AWireless LAN unit
installation section
Install the optional Wireless LAN unit here. Remove the
stopper when installing.
s"Installing the Wireless LAN Unit" p.27
BScrew holes to fix the
cable cover
Screw holes to fix the cable cover in place.
s"Attaching and Removing the Cable Cover" p.27
CRS-232C port When controlling the projector from a computer, connect
it to the computer with an RS-232C cable. This port is for
control use and should not normally be used.
s"ESC/VP21 Commands" p.118
DMonitor Out port Outputs analog RGB signals input from the Computer1
port to an external monitor. You cannot output signals
input from other ports or component video signals.
EAudio Out port Outputs the sound of the image currently being projected
to external speakers.
Name Function
FPower inlet Connects the power cable to the projector.
s"From Installation to Projection" p.30
GCable Holder Insert the supplied cable clamp here to prevent the HDMI
and power cables from falling out.
See the following for more details on the installation
procedure.
sQuick Start Guide
HSecurity slot The security slot is compatible with the Microsaver
Security System manufactured by Kensington.
s"Anti-Theft Lock" p.60
ISecurity cable
installation point
A commercially available theft-prevention wire lock can
be passed through the installation point to secure the
projector to a desk or pillar.
s"Anti-Theft Lock" p.60
JLAN port Connects a LAN cable to connect to a network.
KUSB (TypeA) port •Connects a USB memory device or a digital camera, and
projects images as a Slideshow.
s"Projecting Without a Computer (Slideshow)"
p.109
•Connects the optional Document Camera.
LUSB (TypeB) port Connects the projector to a computer via the
commercially available USB cable to use the Wireless
Mouse function.
s"Using the Remote Control to Operate the Mouse
Pointer (Wireless Mouse)" p.50
MComputer2 port For analog RGB signals from a computer and component
video signals from other video sources.
NAudio2 port Inputs audio from equipment connected to the
Computer2 port.
OComputer1 port For analog RGB signals from a computer and component
video signals from other video sources.
Part Names and Functions
10

Name Function
PAudio1 port Inputs audio from equipment connected to the
Computer1 port.
QAudio-L/R port Inputs audio from equipment connected to the S-Video
port or the Video port.
RS-Video port For S-video signals from video sources.
SVideo port Inputs composite video signals from video sources.
THDMI port Inputs video signals from HDMI compatible video
equipment and computers. This projector is compatible
with HDCP
g signals.
UTrigger out port When the projector is turned on, a DC 12 V signal is
output from this port. When the projector is turned off, or
if it enters an abnormal status, 0 V is output from this port.
This informs external devices whether the projector is on
or off.
To enable trigger output, set Trigger Out from the
Configuration menu to On.
sExtended - Operation p.69
Base
Name Function
ACeiling mount fixing
points (For Ceiling
mount ELPMB22: four
points)
Attach the optional ceiling mount here when suspending
the projector from a ceiling.
s"Installing the Projector" p.18
s"Optional Accessories" p.124
BCeiling mount fixing
points (For Ceiling
mount ELPMB23:
three points)
CFront adjustable foot When setup on a surface such as a desk, extend the foot to
adjust the position of the image.
s"Adjusting the Image Position" p.36
Part Names and Functions
11

Control Panel
Name Function
A[t] button Turns the projector power on or off.
s"From Installation to Projection" p.30
B[Source Search]
button
Switches to the image from the input port where video
signals are being input.
s"Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.31
C[w][v] buttons •Performs vertical keystone correction.
s"Correcting keystone distortion in vertical
directions" p.33
•If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s"Using the Configuration Menu" p.62
s"Using the Help" p.83
Name Function
D[<][>] buttons •Performs horizontal keystone correction.
s"Correcting keystone distortion in horizontal
directions" p.33
•If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s"Using the Configuration Menu" p.62
s"Using the Help" p.83
E[Help] button Displays and closes the Help screen which shows you how
to deal with problems if they occur.
s"Using the Help" p.83
F[Esc] button •Stops the current function.
•If pressed when the Configuration menu is displayed, it
moves to the previous menu level.
s"Using the Configuration Menu" p.62
G[Enter] button •When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
•If pressed while projecting analog RGB signals from
Computer1 port or Computer2 port, you can
automatically optimize Tracking, Sync., and Position.
H[Menu] button Displays and closes the Configuration menu.
s"Using the Configuration Menu" p.62
Part Names and Functions
12

Remote Control Name Function
A[t] button Turns the projector power on or off.
s"From Installation to Projection" p.30
B[Computer] button Each time you press the button, the input changes between
images from the Computer1 port and the Computer2
port.
C[Video] button Each time the button is pressed, the image cycles through
the S-Video, Video, and HDMI ports.
D[Split] button Press this button to split the screen in two and project two
images simultaneously.
s"Projecting Two Images Simultaneously (Split
Screen)" p.43
ENumeric buttons •Use this button to enter passwords and set the remote
control ID.
s"Setting the remote control ID" p.53
s"Setting Password Protect" p.57
•Use this button to enter numbers in Network settings
from the Configuration menu.
F[A/V Mute] button Turns the video and audio on or off.
s"Hiding the Image and Sound Temporarily (A/V
Mute)" p.47
G[Freeze] button Images are paused or unpaused.
s"Freezing the Image (Freeze)" p.48
H[Auto] button If pressed while projecting analog RGB signals from
Computer1 port or Computer2 port, you can
automatically optimize Tracking, Sync., and Position.
I[Aspect] button The aspect ratio changes each time the button is pressed.
s"Changing the Aspect Ratio" p.39
Part Names and Functions
13

Name Function
J[Page] buttons
[Up] [Down]
Changes pages in files such as PowerPoint files when using
the following projection methods.
•When using the Wireless Mouse function
s"Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.50
•When connecting to a network
When projecting images using Slideshow, pressing these
buttons displays the previous/next image.
K[E-Zoom] buttons
[z][x]
Enlarges or reduces the image without changing the
projection size.
s"Enlarging Part of the Image (E-Zoom)" p.49
L[Menu] button Displays and closes the Configuration menu.
s"Using the Configuration Menu" p.62
M[][ ]
[][ ] buttons
•When the Configuration menu or Help screen is
displayed, pressing these buttons selects menu items
and setting values.
s"Using the Configuration Menu" p.62
•When projecting a Slideshow, pressing these buttons
displays the previous/next image, rotates the image, and
so on.
s"Slideshow operating methods" p.109
•During Wireless Mouse function, the mouse pointer
moves in the direction of the button that was pushed.
s"Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.50
N[Enter] button •When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
s"Using the Configuration Menu" p.62
•Acts as a mouse's left button when using the Wireless
Mouse function.
s"Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.50
Name Function
O[Esc] button •Stops the current function.
•If pressed when the Configuration menu is displayed, it
moves to the previous level.
s"Using the Configuration Menu" p.62
•Acts as a mouse's right button when using the Wireless
Mouse function.
s"Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.50
P[Volume] buttons
[a][b]
[a] Decreases the volume.
[b] Increases the volume.
s"Adjusting the Volume" p.37
Q[Pointer] button Displays the on-screen pointer.
s"Pointer Function (Pointer)" p.48
R[Help] button Displays and closes the help screen which shows you how
to deal with problems if they occur.
s"Using the Help" p.83
S[Color Mode] button Each time the button is pressed, the Color Mode changes.
s"Selecting the Projection Quality (Selecting Color
Mode)" p.37
T[Num] button Hold down this button and press the numeric buttons to
enter passwords and numbers.
s"Setting Password Protect" p.57
U[ID] button Hold down this button and press the numeric buttons to
set the remote control ID.
s"Setting the remote control ID" p.53
V[User] button Select any frequently used item from the five available
Configuration menu items, and assign it to this button. By
pressing the User button, the assigned menu item
selection/adjustment screen is displayed, allowing you to
make one-touch settings/adjustments.
s"Settings Menu" p.68
Test Pattern is assigned as the default setting.
Part Names and Functions
14

Name Function
W[USB] button Changes to the following image.
Images from the device connected to the USB (TypeA)
port
X[LAN] button Changes to the images projected with EasyMP Network
Projection. When projecting using the optional Quick
Wireless Connection USB Key, this button switches to
that image.
Y[Source Search]
button
Switches to the image from the input port where video
signals are being input.
s"Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.31
ZRemote control light-
emitting area
Outputs remote control signals.
Replacing the remote control batteries
If delays in the responsiveness of the remote control occur or if it does not
operate after it has been used for some time, it probably means that the
batteries are becoming flat. When this happens, replace them with new
batteries. Have two AA size manganese or alkaline batteries ready. You
cannot use other batteries except for the AA size manganese or alkaline.
Attention
Make sure you read the following manual before handling the batteries.
sSafety Instructions
a
Remove the battery cover.
While pushing the battery compartment cover catch, lift the cover
up.
b
Replace the old batteries with new batteries.
Part Names and Functions
15

Caution
Check the positions of the (+) and (-) marks inside the battery holder to
ensure the batteries are inserted the correct way.
c
Replace the battery cover.
Press the battery compartment cover until it clicks into place.
Remote control operating range
Part Names and Functions
16

Preparing the Projector
This chapter explains how to install the projector and connect projection sources.

Installation Methods
The projector supports the following four different projection methods.
Install the projector according to the conditions of the installation location.
•Project images from in front of
the screen. (Front projection)
•Project images from behind a
translucent screen. (Rear projec‐
tion)
•Suspend the projector from the
ceiling and project images from
in front of a screen. (Front/Ceil‐
ing projection)
•Suspend the projector from the
ceiling and project images from
behind a translucent screen.
(Rear/Ceiling projection)
Warning
•A special method of installation is required when suspending the projector
from a ceiling (ceiling mount). If it is not installed correctly, it could fall
causing an accident and injury.
•If you use adhesives on the Ceiling mount fixing points to prevent the screws
from loosening, or if you use things such as lubricants or oils on the
projector, the projector case may crack causing it to fall from its ceiling
mount. This could cause serious injury to anyone under the ceiling mount
and could damage the projector.
When installing or adjusting the ceiling mount, do not use adhesives to
prevent the screws from loosening and do not use oils or lubricants and so
on.
Attention
•Do not use the projector on its side. This may cause malfunctions to occur.
•Do not cover the projector's air intake vent or air exhaust vent. If either of
the vents are covered, the internal temperature could rise and cause a fire.
a
•An optional Ceiling mount is required when suspending the
projector from a ceiling.
s"Optional Accessories" p.124
•You can change the setting as follows by pressing down the [A/V
Mute] button on the remote control for about five seconds.
FrontWFront/Ceiling
Set Rear or Rear/Ceiling from the Configuration menu.
sExtended - Projection p.69
How to install
Install the projector so that it is parallel to the screen.
Installing the Projector
18

If the projector is installed at an angle to the screen, keystone distortion
occurs in the projected image. See the following for more information on
correcting keystone distortion.
s"Correcting Keystone Distortion" p.33
a
Place the projector on a level surface, so that it is not tilted.
Screen Size and Approximate Projection Distance
Projection size is determined by the distance from the projector to the
screen. See the following illustrations to select the best position according to
the screen size. The illustrations show the approximate shortest distance at
maximum zoom. See the following for more information on the projection
distance.
s"Screen Size and Projection Distance" p.125
a
When you correct keystone distortion, the projected image may be
reduced.
EB-D6155W
16:10 Screen Size
EB-D6250/EB-D6150
4:3 Screen Size
Installing the Projector
19

The port name, location, and connector orientation differ depending on the source being connected.
Connecting a Computer
To project images from a computer, connect the computer using one of the following methods.
ABWhen using the supplied computer cable
Connect the computer's display output port to the projector's Computer1 or Computer2 port.
CWhen using a commercially available HDMI cable
Connect the computer's HDMI port to the projector's HDMI port.
a
To output audio from the projector's speaker, you need to connect a commercially available audio cable.
Connecting Equipment
20