Epson PowerLite 1940W System manual

INSTALLATION HANDBOOK
Remote Control Information
Epson PowerLite 1940W / 1945W / 1950 /
1955 / 1960 / 1965
1
Remote Control Operation
The remote control lets you control the projector from almost anywhere in the room, up to 26 feet (8 m)
away. You can point it at the screen, or the front or back of the projector.
Make sure that you aim the remote control at the projector's receivers within the angles listed here.
1 26 feet (8 m)
2 45º
3 30º
4 15º
Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or
the projector may not respond to commands. If you will not use the remote control for a long time,
remove the batteries.

INSTALLATION HANDBOOK
Remote Control Information
Epson PowerLite 1940W / 1945W / 1950 /
1955 / 1960 / 1965
2
Using the Remote Control as a Wireless Mouse
You can use the projector's remote control as a wireless mouse so you can control your computer
presentation from a distance.
1. Connect the projector to a computer using the projector's USB-B,Computer,DisplayPort, or HDMI
port to display video.
2. If you connected your computer to the Computer,DisplayPort, or HDMI port, also connect a USB
cable to the projector's USB-B port and to a USB port on your computer (for wireless mouse
support).
3. Start your presentation.
4. Use the following buttons on the remote control to control your presentation:
•To move through slides or pages, press the up or down Page buttons.
•To move the cursor on the screen, use the arrow buttons.
•To left-click, press the button once (press it twice to double-click).
•To right-click, press the Esc button.
•To drag-and-drop, hold the button as you move the cursor with the arrow buttons, then release
at the destination.

INSTALLATION HANDBOOK
Remote Control Information
Epson PowerLite 1940W / 1945W / 1950 /
1955 / 1960 / 1965
3
Using the Remote Control as a Presentation Pointer
You can use the projector's remote control as a pointer to help you call out important information during
a presentation. The default pointer shape is an arrow, but you can select an alternative shape using the
Settings menu.
1. Press the Pointer button on the remote control.
2. Use the arrow buttons on the remote control to move the pointer on the screen.
3. Press Esc to clear the pointer from the screen.
Selecting an Image Source
If you connected multiple image sources to the projector, such as a computer and DVD player, you may
want to switch from one image source to the other.
1. Make sure the connected image source you want to use is turned on.
2. For video image sources, insert a DVD or other video media and press its play button (if necessary).

INSTALLATION HANDBOOK
Remote Control Information
Epson PowerLite 1940W / 1945W / 1950 /
1955 / 1960 / 1965
4
3. Do one of the following:
•Press the Source Search button on the projector or remote control until you see the image from
the source you want.
•Press the button for the source you want on the remote control. If there is more than one port for
that source, press the button again to cycle through the sources.
1 Computer port sources
2 Video and HDMI sources
3 USB port sources (computer display and external devices)
4 Network source