Epson PowerLite 735c Dimensions

Page 1 of 1
PSB.2006.04.002
EPSON PRODUCT SUPPORT BULLETIN
Date: 04/20/2006 Originator: AP
PSB #: PSB.2006.04.002 Authorization:
Reference: TI 05-95e Rev. A Total Pages: 1
Product(s): PowerLite 735c / 737c / 745c / 755c / 765c / 835p / 7850p
Subject: Animation converter issue found with EMP SlideMaker2 version 1.12
This bulletin was created to inform users of the EMP SlideMaker2 version 1.12 software of a
problem converting certain animations from Microsoft PowerPoint into a Scenario file.
Details:
In the previous EMP SlideMaker2 version 1.11, certain PowerPoint animations were supported
in the Scenario files which are created by EMP SlideMaker2. Table 1 shows the list of
animations supported in EMP SlideMaker2 version 1.11:
Table 1
Table 2 shows the list of animations from Table 1 that will not be ported from PowerPoint into
the Scenario file by EMP SlideMaker2 version 1.12:
Table 2
Countermeasure:
If it is necessary to use these animations in the Scenario files, use EMP SlideMaker2 version
1.11. Versions of EMP SlideMaker2 subsequent to version 1.12 are expected to incorporate
the animations shown in Table 1 above.
EMP SlideMaker2 version 1.11 may be downloaded at www.epson.com. Download
epson10855.exe to get this version of the software.
If it is not necessary to use these animations listed in Table 2 above, continue to use the EMP
SlideMaker2 version 1.12. Download epson11217.exe at www.epson.com for EMP
SlideMaker2 version 1.12.
- Fly - Blinds - Box - Checkerboard
- Crawl - Dissolve - Peek - Random Bars
- Spiral - Split - Stretch - Strips
- Swivel - Wipe - Zoom
- Crawl - Peek
- Spiral - Stretch
- Swivel - Zoom

Page 1 of 3
PSB.2005.05.001
EPSON PRODUCT SUPPORT BULLETIN
Date: 05/11/2005 Originator: VS
PSB #: PSB.2005.05.001 Authorization:
Reference: TI 03-42e Rev. B, TI 04-45e Rev. D Total Pages: 3
Product(s): PowerLite 735c
Subject: Supported Wired and Wireless LAN cards
Reason:
This bulletin is to inform you of the testing results for wired and wireless LAN cards used with
the PowerLite 735c.
Models and firmware versions used in the evaluation:
Projector PowerLite 735c
Firmware V1.11
IM-X firmware (EasyMP) V1.10
EMP Monitor Version 3.04
NS Connection Version 1.32
Wireless LAN cards configuration:
1) The tested Wireless LAN cards are inserted into the PC and a wireless LAN connection
(Ad hoc mode) is made to the projector.
2) The tested Wireless LAN cards are inserted into the PC and a wireless LAN connection
is made to the projector using an access point (Infrastructure mode).
Items evaluated:
The following items were tested and confirmed to work in both Ad hoc and Infrastructure
modes. (WEP is only supported in the Infrastructure mode.)
1) All functions of EMP Monitor.
2) The following was tested in Infrastructure mode:
•DHCP, ESSID and WEP can be setup by a browser and function properly.
•WPA and LEAP work when implemented.
3) EMP NS Connection functions properly with the freeze, mute, zoom, and video input
change features.
4) Power Point slide show works.

Page 2 of 3
PSB.2005.05.001
Evaluation results for the Wireless LAN cards:
Wireless LAN card POWERLITE 735c
3Com,3crshpw 196, office connect Pass
Cisco Aironet350 AIR-PCM341(2.4GHz) Pass
FMV Notebook (Broadcom BCM4306) Pass
FMV Notebook (Intersil Prism2.5) Pass
Fujitsu FMV-JW181(Agere) Pass
Fujitsu FMV-JW183(Agere HermesII) Pass
Fujitsu FMV-W182(Intersil Prism2.5) Pass
D-Link Airplus XtremeG DWL-G650 Pass
Intel,CR Pro Wireless 2011B, LAN PC Card Pass
Linksys WPC11 Wireless Network PC Card Pass
NetGear 54Mbps wireless PC Card WG511 Pass
SMC 2435W, EZ Connect Turbo, Pass
US Robotic Ref. 9514115MBP Pass
BUFFALO WLI-CB-G54 Pass
ADTEK ADLINK2422C Pass
FMV Notebook (Intel Calexico) Fail
Wired LAN cards configuration:
Inserted the wired LAN card to be tested into the projector, connected the projector to a hub
and connected two PCs to the same hub.
Items evaluated:
The following items were tested and confirmed to work.
1) All functions of EMP Monitor.
2) That DHC can be setup using a browser and functions properly.
3) EMP NS Connection functions properly with the freeze, mute, zoom, and video input
change features.
4) Power Point slide show works.
5) Using EMP NS Connection, a PC can take control of a projector from another PC.
Evaluation results for the Wired LAN cards:
Wired LAN Card name POWERLITE 735c
3Com 3C589C-TP Pass
3Com 3CXE589ET-JP Pass
D-Link DFE670TXD Pass
Fujitsu FMV-J182 Pass
Hawking PN652TX Pass
Linksys PCM100 ver2 Pass
Netgear FA411 Pass

Page 3 of 3
PSB.2005.05.001
SMC SMC8041TX Pass
3Com 10/100 LAN PC Card 3CCFE574BT Pass
PCET100-CL Pass
Linksys 10/100 PC Card Pass
SMC 8041TX V.2, EZ PC Card 10/100, SMC Pass
BUFFALO LPC-PCM-CLX Pass
ELECOM LD-CDK/TX Pass
Corega EtherII PCC-TD Pass
PLANEX FNW-3700-TX Pass
The following cards are NOT compatible:
01) 3Com 3CCFE575BT-JP
02) 3Com 3CXFE575CT-JP
03) 3Com 3CXFEM656C
04) Megahertz 10/100 LAN CardBus PC Card, 3Com
05) Come once (Taiwan card)
06) DFE-690TXD- Cardbus 32 bits
07) Fujitsu FMV-J184
08) Fujitsu FMV-J185
09) LPC3-CLTL
10) NetGear CardBus Notebook Adapter FA511
11) SMC 8036TX, EZ PC Card 10/100, SMC
12) TDK LAK-CB100X
13) Toshiba LANCB100A
14) Xircom CE3B-100BTX
15) Xircom CreditCard Ethernet CE3-10/10
16) I-O Data PCLA/TE
17) PCC-TXD
18) Kingston EtheRx PC Card KNE-PC2T
19) PLANEX GC-1000T
20) PLANEX FNW-3800-TX
21) BUFFALO LPC-CB-CLGT
22) IO DATA ETX-PCM
23) ELECOM LD-CBK/TX
NOTE:
No EMI (electro magnetic interference) was done, only a functionality evaluation.

Page 1 of 14
PSB.2004.10.002
EPSON PRODUCT SUPPORT BULLETIN
Date: 10/08/2004 Originator: DS
PSB #: PSB.2004.10.002 Authorization:
Reference: TI 04-46e Rev. A Total Pages: 14
Product(s): EMP NS Connection, EMP Network Manager, EMP Monitor,
EMP Multi Screen Adjustment, Cinema Color Editor, VCOM Driver
Subject: Evaluation results of Epson Projector PC applications tested in Windows XP
with SP2.
The purpose of this bulletin is to provide information on Epson PC projector applications tested
under the Windows XP SP2 (Service Pack2) environment.
Description:
Information is provided about the evaluation results and recommendations for Epson PC
projector applications functionality in Windows XP SP2 Firewall environment.
Reason:
Compatibility testing for functionality of EMP NS Connection, EMP Network Manager, EMP
Monitor, EMP Multi Screen Adjustment, Cinema Color Editor, VCOM Driver in the Windows
XP SP2 environment.
Results of Windows XP SP2 installation:
Installing SP2 on PCs did not disturb the installation of the above software applications.
Also, the application software can be installed on PCs where SP2 or earlier versions are
installed without any issues.
The information contained in the following pages provides details for executing the
applications in Windows XP SP2.

Page 2 of 14
PSB.2004.10.002
Executing the Software:
When executing the software noted below for the first time after SP2 installation completes,
the following security alert messages are displayed:
[EMP NS Connection]
Security alert screen (EMP NS Connection)
[EMP Network Manager]
Security alert screen (EMP Network Manager)

Page 3 of 14
PSB.2004.10.002
[EMP Monitor]
Security alert screen (EMP Monitor)
[EMP Multi Screen Adjustment]
Security alert screen (EMP Multi Screen Adjustment)
The Security Alert screen for EMP Multi Screen Adjustment is shown after clicking the
Auto button of Network or clicking the Add button after entering an IP address in the
IP Address box.

Page 4 of 14
PSB.2004.10.002
[Cinema Color Editor]
Security alert screen (Cinema Color Editor)
The functions of the three buttons displayed in the security alert screen are explained
below.
[Keep Blocking] --- Enables you to register a started application in the “Exceptions”
program of the Windows Firewall. The network port that the
application uses is blocked. By selecting this button once, this
security alert message will not be shown when starting the
application next time.
[Unblock] ------------- Enables you to register a started application in the “Exceptions”
program of the Windows Firewall and unblock the network port that
the application uses. By selecting this option once, this security alert
message will not be shown when starting the application next time.
[Ask me later]-------- When you want to select both buttons above or select either one
later, this button is selected. The started application is not registered
in the “Exceptions” program of the Windows Firewall and the
network that the application uses is not unblocked. However, when
restarting the application, the same security alert message is shown.
•PC applications will work normally on Windows XP with SP2 if the “Unblock
Item” is selected when the security alert screen is shown.
For the detail operation information of each application, please refer to the following:

Page 5 of 14
PSB.2004.10.002
Operating Status Report
When selecting the Keep Blocking button, the security alert message is closed and the
main screen of each application is displayed.
[EMP NS Connection Application]
Port 3620 is necessary for searching for projectors. If this port is blocked, projectors are not
detected.
The other applications operate normally. However, there is a case that execution of
automatic search disables automatic detection. This occurs when projectors are registered
for automatic detection in EMP Monitor before installing SP2, then the registered projectors
may not be detected again after SP2 installation. Therefore it is recommended to select
Unblock in the security alert screen.
If “Keep Blocking” has been selected when starting the application for the first
time, and the blocking needs to be removed, complete the execution of the application and
proceed with unblocking as follows:
a.) Start the Windows Security Center. Double click the icon in the shape of a shield that
is always displayed on the taskbar after the installation of SP2.
Windows Security Center screen
b.) Select and start Windows Firewall

Page 6 of 14
PSB.2004.10.002
Windows Firewall screen
[Caution]
In case the check box
for Don’t allow
exceptions
is checked (this box is
not checked at the
initial setting), a
network port for
software is not
unblocked even though
the software is checked
on Exceptions.
Make sure this option is
not selected.