Epson PowerLite L400U User manual

PowerLite®L400U/L500W/L510U/L610/L610U/L610W/L615U
Quick Reference
This Quick Reference card gives brief instructions on connecting your
projector and using common features. For details, see the online
User’s Guide.
IMPORTANT: Before using this product, make sure you read these
instructions and the safety instructions in the online User’s Guide.
Note:
• HDBaseT™ is available for the PowerLite L510U/L610U/L610W/L615U only.
• The wireless LAN module accessory is available for the
PowerLite L400U/L500W/L510U/L610/L610W only.
VGA-to-component cable
VGA cable
Ethernet cable
Stereo mini jack cable
USB cable USB device Wireless LAN module
HDMI cable

Displaying a Test Pattern
Note: See the online User’s Guide for
instructions on displaying a test pattern from
the remote control using the Settings menu.
1. Press the down arrow/button on
the projector.
2. Press the Enter button to change
the test pattern.
3. When you’re done, press the Esc
button to clear the test pattern.
Changing Screen Type
Set the Screen Type setting to the
screen’s aspect ratio.
1. Press the Menu button.
2. Select Extended > Display >
Screen > Screen Type.
3. Select the screen’s aspect ratio.
Note: The displayed image should match
the screen’s size and shape.
4. When you’re done, press the Menu
button to exit.
Note: After changing the screen type, you
may need to change the aspect ratio of the
projected image depending on the input
signal. Press the Aspect button on the
remote control to change the aspect ratio,
if necessary.
Turning the Projector On
1. Turn on your computer or image
source.
2. Press the power button on the
projector or remote control. After the
status light stays blue, the projector
is ready.
Note: If the Direct Power On function is
enabled, you can turn the projector on
without pressing the power button;
just plug it in or flip the switch controlling
the outlet to which the projector is
connected. To turn on this feature, see
the online User’s Guide.
3. If your image does not appear, see
“Switching Between Image Sources”
or “Troubleshooting.”
Changing the Language of
the Projector Menus
The default language of the projector’s
menu system is English, but you can
change it as necessary.
1. Press the Menu button to access
the projector’s menu system.
2. Select Extended > Language.
3. Select your language.
4. When you’re done, press the Menu
button to exit.
Switching Between Image
Sources
Press the Source Search button or
one of the source buttons (remote
control), or the Source Search button
(projector).

Correcting Image Shape
If your image is uneven on the sides,
you can use the projector’s distortion
correction features, such as
H/V-Keystone, Quick Corner®, and Arc
Correction, to adjust the shape. See the
online User’s Guide.
Making Other Image
Adjustments
For help on using the projector’s
features to improve the image quality,
see the online User’s Guide.
Turning the Projector Off
Press the power button on the
projector or remote control. If you see a
confirmation message, press the
power button again.
Note: If the Direct Power On function is
enabled, you can flip the switch controlling
the outlet to which the projector is connected
instead. To turn on this feature, see the
online User’s Guide.
With Epson’s Instant Off®technology,
you don’t have to wait for the projector
to cool down; just turn it off or unplug it
when you’re done.
Adjusting Image Position
Using Lens Shift
Note: Lens shift is not available on the
PowerLite L400U/L500W. See the online
User’s Guide for instructions on adjusting
image position using the Extended menu.
1. Turn the vertical and horizontal lens
shift dials on the projector to adjust
the position of the projected image.
2. If the projector is on a table, you can
level the image by turning any of the
projector’s adjustable feet.
Focusing and Zooming
Turn the focus ring to sharpen the
image.
Turn the zoom ring to reduce/enlarge
the image.

Where to Get Help
Manuals
For more information about using the
projector, you can view or download the
online manuals from the Epson website,
as described below.
Internet support
Visit www.epson.com/support (U.S.) or
www.epson.ca/support (Canada) and
search for your product to download
software and utilities, view manuals, get
FAQs and troubleshooting advice, or
contact Epson.
Speak to a support representative
To use the Epson®PrivateLine®
Support service, call [phone].
This service is available for the duration
of your warranty period. You may also
speak with a projector support specialist
by dialing [phone] (U.S.) or
[phone] (Canada).
Support hours are 6 am to 8 pm, Pacific
Time, Monday through Friday, and 7 am
to 4 pm, Pacific Time, Saturday.
Days and hours of support are subject
to change without notice. Toll or long
distance charges may apply.
Purchase supplies and accessories
You can purchase accessories from an
Epson authorized reseller. To find the
nearest reseller, call 800-GO-EPSON
(800-463-7766). Or you can purchase
online at www.epsonstore.com (U.S.
sales) or www.epson.ca (Canadian
sales).
Troubleshooting
If you see a blank screen or the
message No signal
•Make sure the status light on the
projector is blue and not flashing.
•Make sure the cables are connected
correctly. See the online User’s
Guide.
•You may need to change the image
source. See “Switching Between
Image Sources.” Also make sure the
source device is turned on.
If the projector and the notebook
don’t display the same image
Windows®
Press the function key on your keyboard
that lets you display on an external
monitor. It may be labeled CRT/LCD or
have an icon such as . You may
have to hold down the Fn key while
pressing it (such as Fn + F7). Wait a
moment for the display to appear. You
may need to press the keys again to
display the image on both devices.
On Windows 7 or later, hold down the
Windows key and press Pat the same
time, then click Duplicate.
Mac
Open System Preferences and select
Displays. Click the Arrangement
tab and select the Mirror Displays
checkbox.

Display the Home screen
Open menus assigned
by user
Hold down and use numeric
buttons to enter numbers
Select color modes
Display pointer
Turn the projector on or off
Open projector menus
Automatically adjust
computer image
Navigate through
menu settings;
move pointer
Temporarily turn off display
and audio
Zoom in or out on part of
an image
Move to next or previous
image when projecting from
a computer over the network
Split the screen between
two inputs
Control volume
Cancel current operation or
return to previous menu
Switch image sources
Display settings for device in
HDMI port
Select a source
Change the aspect ratio
Hold down and use numeric
buttons to select which projector
to control
Freeze the image
Remote Control Map

EPSON, PowerLite, Quick Corner, and Instant Off are registered trademarks and EPSON Exceed Your Vision is a registered logomark of
Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc.
Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
HDBaseT is a trademark of the HDBaseT Alliance.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.
Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2018 Epson America, Inc., 4/18
CPD-55499
Printed in XXXXXX
Replacement Parts
Product Part number
Air filter (ELPAF56) V13H134A56
You can purchase replacement parts from an Epson
authorized reseller. See “Where to Get Help” inside this card
for more information.