Epson G5000 - PowerLite XGA LCD Projector System manual

INSTALLATION HANDBOOK
Remote Control Information
Epson PowerLite G5000
1
Using the Remote Control
Make sure batteries are installed as described on page 78. Follow these
tips for using the remote control:
Point the remote control at the front of the projector or at the
screen.
Stand within 49 feet (15 meters) of the projector.
Controlling the Picture and Sound
You can use the remote control to preview and select your picture
sources, temporarily turn o the picture and sound, freeze the action,
zoom in on the picture, and adjust the volume.
Switching Between Picture Sources
If your projector is connected to more than one computer and/or
video source, you can switch between the dierent sources:
The easiest way to select your source is to press the Search button
on the remote control (or the Source Search button on the
projector) repeatedly until you see the image you want on the
screen.
On the remote control, you can press one of the Source buttons
to select the connected device you need.
After you select a source, the screen goes dark for a moment before the
image appears.
note
If a button is pressed longer
than 30 seconds, the remote
control stops operating to
conserve battery power.
When you release the
button, normal operation
resumes.
note
Using the remote under
bright uorescent lamps or
in direct sunlight may aect
projector response.
note
The BNC, EasyMP, and
HDMI buttons are not
applicable to this projector.

INSTALLATION HANDBOOK
Remote Control Information
Epson PowerLite G5000
2
Turning Off the Picture and Sound
You can temporarily turn o the image and sound by pressing the
A/V Mute button on the remote control. This turns the image black
and stops the sound. To turn the image and sound back on, press the
button again.
You can have the screen turn blue (using the Display setting as
described on page 59) or display an image such as a company logo
when you press the A/V Mute button. (See page 56 for more
information on displaying an image.)
Stopping Action
Press the Freeze button on the remote control to stop the action in
your video or computer image. The image freezes but the sound
continues.
To restart the action, press the Freeze button again.
note
In order to play sound with
this projector, you must
connect optional external
speakers
note
This function pauses the
image, not the sound.
Because the source continues
to transmit signals, when
you resume the action, it
won’t be at the point you
stopped it.

INSTALLATION HANDBOOK
Remote Control Information
Epson PowerLite G5000
3
Zooming Part of Your Image
You can zoom in on a portion of the image using the E-Zoom buttons
on the remote control.
1. Press the E-Zoom button on the remote control.
You see a crosshair indicating the center of the zoom-in area.
2. Use the pointer button to position the crosshair.
3. Continue pressing the E-Zoom button to enlarge the selected
area up to 4 times.
4. While the image is enlarged, you can:
Use the pointer button to move around the screen.
Press the E-Zoom button to zoom out.
5. When done, press the ESC button to return the image to its
original size.
Controlling the Volume
To change the volume, press the or button on the remote
control.
You can also adjust the volume using the projector’s menu system.
note
You cannot use the
Progressive or Noise
Reduction features (see
page 50) while you are using
E-Zoom.
note
To temporarily shut o the
sound and picture, press the
A/V Mute button.