Epson PowerLite 570 System manual

INSTALLATION HANDBOOK
Remote Control Info
Epson PowerLite 570 / 575W / 580 / 585W
1
Remote Control Operation
The remote control lets you control the projector from almost anywhere in the room, up to 19.7 feet (6 m)
away. You can point it at the screen or board, or the front or back of the projector.
Make sure that you aim the remote control at the projector's receivers within the angles listed here.
1 19.7 feet (6 m)
2 ± 30º
3 ± 55º
4 ± 60º
5 ± 75º
6 ± 15º
Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or
the projector may not respond to commands. If you will not use the remote control for a long time,
remove the batteries.
Using the Remote Control as a Wireless Mouse
1. Connect the projector to a computer using the projector's USB-B,Computer, or HDMI port to
display video.
2. If you connected your computer to the Computer or HDMI port, also connect a USB cable to the
projector's USB-B port and to a USB port on your computer (for wireless mouse support).
3. Start your presentation.
You can use the projector's remote control as a wireless mouse so you can control projection at a
distance from the computer.

INSTALLATION HANDBOOK
Remote Control Info
Epson PowerLite 570 / 575W / 580 / 585W
2
4. Use the following buttons on the remote control to control your presentation:
•To move through slides or pages, press the up or down Page buttons.
•To move the cursor on the screen, use the arrow buttons.
•To left-click, press the button once (press it twice to double-click).
•To right-click, press the Esc button.
•To drag-and-drop, hold the button as you move the cursor with the arrow buttons, then release
at the destination.
Using the Remote Control as a Pointer
You can use the projector's remote control as a pointer to help you call out important information on the
screen. The default pointer shape is an arrow, but you can select an alternative shape using the Settings
menu.
1. Press the Pointer button on the remote control.
2. Use the arrow buttons on the remote control to move the pointer on the screen.
3. Press Esc to clear the pointer from the screen.

INSTALLATION HANDBOOK
Remote Control Info
Epson PowerLite 570 / 575W / 580 / 585W
3
Selecting an Image Source
If you connected multiple image sources to the projector, such as a computer and DVD player, you may
want to switch from one image source to the other.
1. Make sure the connected image source you want to use is turned on.
2. For video image sources, insert a DVD or other video media and press its play button, if necessary.
3. Do one of the following:
•Press the Source Search button on the projector or remote control until you see the image from
the source you want.
•Press the button for the source you want on the remote control. If there is more than one port for
that source, press the button again to cycle through the sources.
1 Computer port sources
2 Video and HDMI sources
3 USB port sources (computer display and external devices)
4 Network source (LAN)

INSTALLATION HANDBOOK
Remote Control Info
Epson PowerLite 570 / 575W / 580 / 585W
4
Projection Modes
Depending on how you positioned the projector, you may need to change the projection mode so your
images project correctly.
•Front/Upside Down (default setting) flips the image over top-to-bottom to project upside-down from a
wall or ceiling mount.
•Front lets you project from a table in front of the screen.
•Rear/Upside Down flips the image over top-to-bottom and horizontally to project from the wall or
ceiling and behind a translucent screen.
•Rear flips the image horizontally to project from behind a translucent screen.
You can change the projection mode using the remote control or by changing the Projection setting in
the Extended menu.
Changing the Projection Mode Using the Remote Control
You can change the projection mode to flip the image over top-to-bottom.
1. Turn on the projector and display an image.
2. Hold down the A/V Mute button on the remote control for five seconds.
The image disappears briefly and reappears flipped top-to-bottom.
3. To change projection back to the original mode, hold down the A/V Mute button for five seconds
again.

Changing the Projection Mode Using the Menus
You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the
projector menus.
1. Turn on the projector and display an image.
2. Press the Menu button.
3. Select the Extended menu and press Enter.
4. Select the Projection setting and press Enter.
5. Select a projection mode and press Enter.
6. Press Menu or Esc to exit the menus.
INSTALLATION HANDBOOK
Remote Control Info
Epson PowerLite 570 / 575W / 580 / 585W
5