Equinox Systems Waterwave 50W User manual

Order code: EQLED374
Waterwave 50W
User Manual

www.prolight.co.uk Waterwave 50W User Manual 2
Safety advice
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CARE-
FULLY BEFORE YOUR INITIAL START-UP!
• Before your initial start-up, please make sure that there is no damage caused during transportation.
• Should there be any damage, consult your dealer and do not use the equipment.
• To maintain the equipment in good working condition and to ensure safe operation, it is necessary
for the user to follow the safety instructions and warning notes written in this manual.
• Please note that damages caused by user modications to this equipment are not subject to warranty.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorised modication to the equipment.
OPERATING DETERMINATIONS
If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and
the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc.
Do not endanger your own safety and the safety of others!
Incorrect installation or use can cause serious damage to people and/or property.
CAUTION!
KEEP THIS EQUIPMENT
AWAY FROM RAIN,
MOISTURE AND LIQUIDS
CAUTION!
TAKE CARE USING
THIS EQUIPMENT!
HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!
• Never let the power cable come into contact with other
cables. Handle the power cable and all mains voltage
connections with particular caution!
• Never remove warning or informative labels from the unit.
• Do not open the equipment and do not modify the unit.
• Do not connect this equipment to a dimmer pack.
• Do not switch the equipment on and off in short intervals,
as this will reduce the system’s life.
• Only use the equipment indoors.
• Do not expose to ammable sources, liquids or gases.
• Always disconnect the power from the mains when
equipment is not in use or before cleaning! Only handle
the power-cable by the plug. Never pull out the plug by
pulling the power-cable.
• Make sure that the available mains supply voltage is
between 240V AC, 50Hz.
• Make sure that the power cable is never crimped or
damaged. Check the equipment and the power cable
periodically.
• If the equipment is dropped or damaged, disconnect the
mains power supply immediately and have a qualied
engineer inspect the equipment before operating again.
• If the equipment has been exposed to drastic
temperature uctuation (e.g. after transportation),
do not connect power or switch it on immediately.
The arising condensation might damage the equipment.
Leave the equipment switched off until it has reached
room temperature.
• If your product fails to function correctly, stop use
immediately. Pack the unit securely (preferably in the
original packing material), and return it to your Pro Light
dealer for service.
• Only use fuses of same type and rating.
• Repairs, servicing and power connection must only be
carried out by a qualied technician. THIS UNIT CONTAINS
NO USER SERVICEABLE PARTS.
• This lighting xture is for professional use only - it is
not designed for or suitable for household use. The
product must be installed by a qualied technician in
accordance with local territory regulations. The safety of
the installation is the responsibility of the installer. The
xture presents risks of severe injury or death due to re
hazards, electric shock and falls.
• Warning! Risk Group 2 LED product according to
EN 62471. Do not view the light output with optical
instruments or any device that may concentrate the beam.
• WARRANTY: One year from date of purchase.

www.prolight.co.uk Waterwave 50W User Manual 3
01 - Hanging bracket
02 - Hanging bracket
adjustment knobs
03 - Focus lens
04 - Colour wheel
rotation switch
05 - IEC power input
06 - Fuse: F1A 250V
07 - Safety eye
In the box: 1 x xture,
1 x power cable &
1 x user manual
POWER INPUT:
100-240V~50/60Hz
POWER CONSUMPTION: 75W
COLOUR WHEEL
ROTATION
OFF ON
FUSE: F1A 250V
www.prolight.co.uk
01 04 0706
03
0202
06
Product overview & technical specications
The Waterwave is a multi-coloured owing water effect powered by a 50W LED. The internal colour wheel can be
stopped at any point for both single or mixed colours. This effect can add unique visual projections which are ideal
for bars, restaurants, shows and special events.
• 1 x 50W white LED
• Beam angle: 40°
• Manual focus
• Five segment colour wheel (cyan, magenta, yellow, green + open)
• Colour change or static colour
• Supplied with hanging bracket
• IEC power input
• Fan cooled
Waterwave 50W
Specications
Power consumption 75W
Power supply 100-240V, 50/60Hz
Fuse F1A 250V
Dimensions 232 x 240 x 255mm
Weight 3kg
255mm240mm
232mm

www.prolight.co.uk Waterwave 50W User Manual 4
Operating instructions & WEEE notice
Correct Disposal of this Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries
with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed of
with other household wastes at the end of its working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate this from other
types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their
local government ofce, for details of where and how they can take this item for environmentally
safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial wastes for disposal.
Colour wheel:
The colour wheel speed is preset and cannot be altered. To set the colour wheel into rotate mode
move the switch to the “ON” position. To stop the rotation and use the effect for either a solid or
split colour move the switch to the “OFF” position.
Focus adjustment:
To adjust the focus rotate the lens assembly on the front of the xture clockwise or anti clockwise to
achieve the desired hard or soft focus effect.