Equity 31003 User manual

Page 3Page 2
DIGITAL LCD
ALARM CLOCK
MODEL: 31003
DC: 082323
POWER UP
Insert 1-AA battery according to polarity.
TIME SETTING
1. Hold the T-SET button. While holding the T-SET button, press
HOUR button to set your hour. Note: The PM Indicator
will appear when you advance to PM time. Press MIN button to
set your minutes.
2. When the correct time is shown on the display, release the
T-SET button.
ALARM TIME SETTING & OPERATION
1. Hold the AL-SET button. While holding the ALARM button, press
HOUR button to set your hour. Note: The PM Indicator
will appear when you advance to PM time. Press MIN button to
set your minutes.
2. When the correct time is shown on the display, release the AL-
SET button.
ALARM ON/OFF
1.Slide the ALARM switch to ON to activate the alarm. Slide the
ALARM switch to OFF to deactivate the alarm.
2. When the alarm time is reached, the alarm will sound for 1
minute if not turned O.
SNOOZE
When alarm sounds, press the SNOOZE/LIGHT button to silence
alarm for 4 minutes. Snooze function can be repeated many times
if desired.
BACKLIGHT
Press the SNOOZE/LIGHT button to illuminate the time briefly.
JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and provide feedback
on our La Crosse Technology social media outlets!
SPECIFICATIONS
Power: 1-AA battery (alkaline preferred
Dimensions: 1.50”H x 3.50”W x 3.00”D
CARE & MAINTENANCE
• Always purchase the correct size and grade of battery most
suitable for intended use.
• Clean the battery contacts and also those of your clock prior to
battery installation.
• Ensure the battery is installed with correct polarity (+ and –).
• Remove battery from equipment when it is not used for an
extended period of time.
• Promptly remove an expired battery.

Page 6Page 5Page 4
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
CAUTION!
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated
or processed using electronic, mechanical or chemical process without the written permission
of the publisher. This booklet may contain errors or misprints. The information it contains
is regularly checked and corrections are included in subsequent editions. We disclaim any
responsibility for any technical error or printing error, or their consequences. All trademarks and
patents are recognized.
Made in China Printed in China
WARNING: This product can expose you to chemicals including styrene, which is known to the
State of California to cause cancer. For more information go to:
www.P65Warnings.ca.gov
Please help in the preservation of the environment and return used batteries to an
authorized depot. Remove the battery from the clock if you do not intend to use it for
an extended period of time.
WARNING: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
WARRANTY & SUPPORT
Equity provides a 2-year limited warranty on this product from the date of
consumer purchase against defects for material and workmanship. During
this period such defects will be repaired, or the product will be replaced
at Equity’s option, without charge. This warranty does not cover damage
caused by misuse or negligence.
ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
IMPLIED WARRANTIES OR FITNESS AND MERCHANTABILITY, ARE
LIMITED IN DURATION TO A PERIOD ENDING TWO YEARS FROM
DATE OF PURCHASE.
Some states do not allow limitations on how long an implied warranty
lasts so the above limitation may not apply to you. This warranty gives you
specific legal rights and you may also have other rights which vary from
state to state.
If your product is not working properly, please send: your
product, a letter explaining the problem, and $5.00 for postage
and handling to:
Equity by La Crosse Warranty Department
2830 26th St S.
La Crosse, WI 54601
For Full Warranty Details, Visit:
www.lacrossetechnology.com/support
MAINTENANCE AND STORAGE
Store the clock without battery and use the original package when not
in use. Clean with a soft cloth or paper towel. Do not use any corrosive
cleaners on the clock. Keep your clock clean and dry to avoid any
problems.
Remove battery from the clock if you do not intend to use it for an
extended period of time. Removed used batteries promptly.
For best performance, it is recommended to replace the battery once per
year to maintain running accuracy. Ensure the battery used is new and the
correct size.