Erato Verse User manual

Grab the device you want to pair with and turn on Bluetooth and open
the settings page and search for new Bluetooth connection.
Select “VERSE” to pair. Blue led flash every 3 seconds from the LED indicates
your pairing was successful.Once pairing is successful on the earphone, simply
power on the R earbud by holding the power button 1 second to turn on.
The 2nd earphone will automatically sync with the L earbud.
Hold the button on the L earbud for 3 seconds until you see
the LED flashing red/blue and hear “POWER ON”, then the
words “PAIRING”.
PAIR
2
S M L
Ear canal
Select your favorite song and give the VERSE earphones a try. If you feel
that the sound is lacking lows, please adjust the eartip to a size up and
adjust the fitment of the earphones in your ear.
Red = Charging
Blue = Full Charged
Red = < 25% battery remaining
Blue = > 25% battery remaining
Remove plastic tag and
fully charge the VERSE
earphones.
PREPARE / CHARGE
1
1 2
EN

QUICK START
3Rock the earbud side by side and remove from the charging case
to automatically turn on the VERSE.
Removing earbuds without rocking motion will keep earbuds
off until you turn them on by pressing the power button.
USE
4
For full user manual
http://erato.life/verse
Button Operations
While Playing Music
Double Press
L Earbud : Volume -
R Earbud : Volume +
Long Press (1 Sec)
(Music off)
Hang up phone call(L)
Long Press (3 Sec)
Pair VERSE (L)
Single Press
Play,pause music(R/L)
Pick up phone calls(L)
While Playing Music
Long Press (1 Sec)
L Earbud : Previous Track
R Earbud : Next Track
Double Press
(Music off)
Activate Siri/Google(L)
Power Off
Long Press (1 Sec) R/L
Power On
Long Press (3 Sec) R/L
3 4