Ergolux BATMAN User manual

BATMAN GAMING CHAIR
EGBATMANBA

A(x1) B(x1)
C(x2) D(x1) E(x1) F(x1)
GM8x45mm (x1) HM6x20mm (x6) IM6x25mm (x4) JM8x35mm (x1)
KM8x35mm (x2) L(x4) M(x6) N(x5)
O(x1) P(x1) S(x1) T(x1)
COMPONENTS

Step 1:
Insert the chair wheels (N) into the sockets - some force may be required, but ensure the
socket is aligned correctly. Insert the gas lift piston (E) into the base (F) and place the
protective plastic tube (O) over the top.
ASSEMBLY

Step 2:
Slide the back (A) onto the seat (B) and attach the armrests (C) using the appropriate
screws (M & K). The right armrest will have a fitted pocket holding the remote control.

Step 3:
Fit the reclining mechanism by attaching the silver fixing (D) to the bottom of the seat using
screws and nuts (H & J).
Step 4:
Attach the fixture (S) to the seat base using a bolt (H).

Step 5:
Attach the piston (T) and fixing (S) to the back of the seat by inserting the end in between
the fixing on the chair and fix it in place with screw and nut (J).

Step 6:
Align the piston place a bolt (G) through to attach the reclining mechanism. Feed the
tension cable through the hoop of the piston and fix the ball on the end of the cable into the
piston lever. Tighten with the attached nuts.

Step 7:
Place the chair onto the base to complete assembly.

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com