Ergolux PALO ALTO ELPALOAOCBA User manual

PALO ALTO LOW BACK
OFFICE CHAIR
ELPALOAOCBA

ACastor wheel (x5)
BBase (x1)
CGas lift (x1)
DGas lift cover (x1)
EMechanism (x1)
FSeat (x1)
GChair back (x1)
HArmrests (x1 pair)
COMPONENTS
H-L
H-R

Hardware
I50mm M6 screw (x2)
J30mm M6 screw (x4)
K18mm M6 screw (x6)
LLock washer (x2)
M1 Upper armrest cover (x2)
M2 Lower armrest cover (x2)
NAllen key (x1)

Step 1: Attach the castor wheels (A) to the base (B).
Step 2: Insert the gas lift (C) into the base (B).Place the gas lift cover (D) over the gas lift
(C).
ASSEMBLY
A
B
D
C
B

Step 3: Align the two holes on the right armrest (H-R) with those on the chair back (H).
Place a lock washer (L) over the upper aligned hole, then using the Allen key (N), secure the
lock washer (L) with a 50mm M6 screw (I). Using the Allen key (N), secure an 18mm M6
screw (K) through the bottom aligned hole.
Repeat this process on the other side of the chair back (H) with the left armrest (H-L).
I (x2)
K (x2)
L (x2)
N (x1)
N
I
L
K
H-R
H-L
K
G
L
I
N

Step 4: Align the holes on the seat (F) with those on the armrests(H-L, H-R).Using the Allen
key (N),secure the seat (F) to the armrests(H-L, H-R) with 30mm M6 screws (J).
J (x4)
N (x1)
Step 5: Align the holes on the mechanism (E) with those on the seat (F).Using the Allen key
(N),secure the mechanism (E) to the chair back (G) with 18mm M6 screws (K).This
completes the chair assembly.
K (x4)
N (x1)
N
J
F
H-L
H-R
E
K
N
F

Step 6: Place the chair assembly onto the gas lift (C). Press firmly to ensure it is secure.
Step 7: Place the upper and lower armrest covers (M1, M2) onto the armrests(H-L, H-R).
M1 (x2)
M2 (x2)
C
H-L
H-R
M1
M2
M1
M2

Assembly complete.

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com