Ballard Designs Delano MA236 User manual

PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 5/4/2017 Page 1 of 5
PRODUCT NAME: Delano Iron Door Cabinet
ITEM NUMBER: MA236
DIMENSIONS OF ITEM ASSEMBLED: 80 3/4”H x 48”W x 16”D
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN CHINA

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 5
TOOLS NEEDED:
-Requires a screwdriver.
-Power drill suggested.
-Assembly requires 2 or more people.
Hardware Located
Here (A-E)
Narrow Shelf (F)
Shelves (F,G)
Ltr.
F 1
stnenopmoC.ytQ
NOTE: When unpacking, lay the parts on
a padded surface such as the packaging provided.
Be sure to locate all hardware before throwing
away any packaging.
NOTE: Assemble the Cabinet in desired location for use.
L-Brackets
Long Screws
Ltr.
C
stroppuSflehSB
2
12
Qty. Hardware Included Ltr. Qty.
A
16
D 8
Anchors
Hardware Included
IMPORTANT:
Installing the L-Bracket (C) to a Wall Stud
and the Cabinet is REQUIRED before any
use of the product for customer safety.
Shelves (G)G 3
E 4
Wood Plugs

NOTE: Assemble the Cabinet in desired location for use.
(E)
Page 3 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 1: Insert the Shelf Supports (B) into the holes of the Cabinet at the desired shelf heights. Set
the Shelves (G) on the Shelf Supports. Insert the Narrow Shelf (F) into the wooden tracks
inside the Cabinet.
If the Cabinet is uneven, adjust the levelers located in the bottom corners using a
Flathead screwdriver. Turn clockwise or counterclockwise until the Cabinet is level.
Insert the Wood Plugs (E) into the leveler holes to cover the holes.
STEP 2:
(G)
(B)
(F)

Wall
STEP 3:
Wall
Stud
Center the Cabinet in front of two studs and mark their location on the Wall. Push the
Cabinet against the wall.
NOTE: Assemble the Cabinet in desired location for use.
STEP 4:
IMPORTANT:
Slide the L-Bracket (C) over the top corner of the Cabinet and in front of the previously
marked stud. Mark the wall at the top of the L-Bracket.
NOTE: It is important that the L-Bracket is positioned like the picture below in order to
hide the Bracket.
(C)
Installing the L-Bracket (C) to a Wall Stud
and the Cabinet is REQUIRED before any
use of the product for consumer safety.
Page 4 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com

STEP 5: Pull the Cabinet away from the wall and attach the L-Brackets (C) to the studs using the
Long Screws (A) and a screwdriver. If there are not studs in the desired Cabinet location,
lightly tap in the Anchors (D) and attach the L-Brackets with the Long Screws.
NOTE: Assemble the Cabinet in desired location for use.
STEP 6: Slide the Cabinet underneath the previously installed L-Brackets (C) and use 2 or more
of the Long Screws (A) to attach the L-Brackets to the Cabinet with a screwdriver.
NOTE: The L-Brackets may not be completely on the Cabinet’s top due to the Wall’s base
molding. Only screw the into the bracket holes that are completely on the Cabinet top.
(D)
(C)
(A)
Wall
Wall
Page 5 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
C
A