Ergotron 888-45-198 User manual

888-45-198-W-01 rev.C • 12/18
1 of 12
LX HD Wall Mount Pivot
www.ergotron.com | USA: 1-800-888-8458 | Europe: [phone] | China: 400-120-3051 | Japan: [email protected]
English, Español, Français, Deutsch, Nederlands, Italiano, Svenska, 日本語, 汉语
± 20˚
+ 15˚
- 5˚
< 50 lbs. (22.7 kg)
Features & Specifications
User's Guide
English
For the latest User Installation Guide please visit: www.ergotron.com

888-45-198-W-01 rev.C • 12/18
2 of 12
ABC D E
1
2
3
4
5
13mm
2.5mm
M4 x 12mm
M8 x 80mm
2
1
1x 1x 1x
4x
2x
2x
1/8"
10-24 x 5/8"
4x 1x
1x
M4 x 8mm
1x
Ø 3/16" (5mm)
Ø 3/8” (10mm)
4x 4x 4x
4x
4x
4x
M5 x 12mm
M5 x 20mm
M5 x 7mm M6 x 12mm
Components
Tools Needed
Stud Finder
Wood Stud Mounting
Concrete Wall Mounting
Important! You will need to adjust this product after installation is complete. Make sure all your equipment
is properly installed on the product before attempting adjustments. This product should move smoothly
and easily through the full range of motion and stay where you set it. If movements are too easy or
difficult or if product does not stay in desired positions, follow the adjustment instructions to create
smooth and easy movements. Depending on your product and the adjustment, it may take many turns to
notice a difference. Any time equipment is added or removed from this product, resulting in a change in
the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum
operation.
M8M5 Converter

888-45-198-W-01 rev.C • 12/18
3 of 12
3
4x
10-24 x 5/8"
1/8"
4
1
4.1"
(104mm)
1.125"
(28.6mm)
6"
(152mm)
Ø 3/16" (5mm)
Ø 3/8” (10mm)
Concrete Ergotron product Wood
Stud Finder
Wood Stud Mounting
Concrete Wall Mounting
WARNING:
Ensure that the wall structure is capable of supporting four times the
total weight of mounted equipment. Mounting to wall surfaces that
do not meet this criteria may result in an unstable, unsafe condition
which could lead to personal injury and/or property damage. Consult a
construction professional if you have any doubt about what this means
in regard to your particular application.
NOTE: Fasteners may unwind due to vibration caused by movement of mounting
solution over time. Inspect mounting solution for loose fasteners on a routine basis. If
desired, apply a light duty thread locking adhesive to fasteners before installation to
prevent back-out.
NOTE: Wall Track and Brackets sold separately.
WALL PLATE MOUNTING INSTRUCTIONS

888-45-198-W-01 rev.C • 12/18
4 of 12
a
bc d
ef
13 mm
Ø 3/16"
(5 mm)
M8 x 80mm
2x
6
Wood
CAUTION: Make sure the wall mount bracket is level,
ush and snug to the wall surface. DO NOT OVERTIGHT-
EN THE BOLTS.

888-45-198-W-01 rev.C • 12/18
5 of 12
a
b
c
Ø 3/8"
(10 mm)
3-1/8"
(80 mm)
WARNING:
Mounting holes must be at least 3-1/8”(80mm) deep and must be located within
solid concrete, not mortar or covering material. If you drill into an area of concrete
that is not solid, reposition mounting holes until both anchors can be fully inserted
into solid concrete!
Wood Stud Mounting

888-45-198-W-01 rev.C • 12/18
6 of 12
1
2
13 mm
d
2x
M8 x 80mm
2x
ef
6
CAUTION: Make sure the wall mount bracket is level, ush and
snug to the wall surface. DO NOT OVERTIGHTEN THE BOLTS.
WARNING:
Anchors that are not fully set in solid concrete will not support the
applied load resulting in an unstable, unsafe condition which could
lead to personal injury and/or property damage. Consult a construction
professional if you have any doubt about what this means in regard to
your particular situation.
Wood Stud Mounting

888-45-198-W-01 rev.C • 12/18
7 of 12
2
360° 0°
To Stop Portrait/Landscape Rotation
insert Screw
M4 x 8mm
3
A
B
C
D
75x75mm
100x100mm
100x200mm
200x200mm
200x100mm
100mm (3-15/16”)
75mm (2-15/16”)
100mm (3-15/16”)
75mm (2-15/16”)
100mm (3-15/16”)
200mm (7-7/8”)
200mm (7-7/8”)
200mm (7-7/8”)
100mm (3-15/16”)
200mm (7-7/8”)
8
9
9
9
VESA Adapter
Congurations
TV/Monitor Hole
Pattern Sizes
Check size of
TV/Monitor hole
pattern

888-45-198-W-01 rev.C • 12/18
8 of 12
A
75x75mm
100x100mm 100mm (3-15/16”)
75mm (2-15/16”)
100mm (3-15/16”)
75mm (2-15/16”)
3
411
M4 x 12mm
4x
M4 x 12mm
4x
75 x 75mm 100 x 100mm
Mount Type A TV/Monitor to Arm

888-45-198-W-01 rev.C • 12/18
9 of 12
100mm (3-15/16”)
200mm (7-7/8”)
200mm (7-7/8”)
200mm (7-7/8”)
100mm (3-15/16”)
200mm (7-7/8”)
BCD
3a
100x200mm 200x200mm 200x100mm
4x
M5 x 7mm
10
3b
4x4x 4x
M4 x 12mm M5 x 12mm M6 x 12mm
Mount VESA Adapters to Arm based on TV/Monitor hole
pattern size (B, C, or D) .
Mount Type B, C, or D TV/Monitor to Arm
NOTE: To reduce M8
holes for use with M5
screws, or if you have a
model with Samsung
holder rings, follow the
M8M5 KIT instructions
on the next page.

888-45-198-W-01 rev.C • 12/18
10 of 12
4x
4x
4x
4x
M5 x 20mm
M5 x 20mm
M8M5 KIT Instructions
NOTE: Follow this step only if your TV/monitor has M8 holes which need to be
reduced to M5.
NOTE: Follow this step only for Samsung models using the holder ring.
Install M8M5 reducer bushing to TV/Monitor and use M5 x 20 mm monitor
screws to secure.
Install M8M5 reducer bushing to TV/Monitor then use M5 x 20 mm monitor screws
and Samsung holder ring to secure.
TV/Monitor Mounting
M8 size hole
TV/Monitor Mounting
M8 size hole
Holder Ring
(Not included *Samsung Only)

888-45-198-W-01 rev.C • 12/18
11 of 12
a
4
5
+ 15˚
- 5˚
Adjustment Step
Important! You will need to adjust this product after installation is complete. Make sure all your equipment is
properly installed on the product before attempting adjustments. This product should move smoothly and easily
through the full range of motion and stay where you set it. If movements are too easy or difficult or if product
does not stay in desired positions, follow the adjustment instructions to create smooth and easy movements.
Depending on your product and the adjustment, it may take many turns to notice a difference. Any time
equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you
should repeat these adjustment steps to ensure safe and optimum operation.
Loosen knob, tilt Display to desired position then retighten knob.
Tilt – Forward and Backward
ATTACH TO WALL MOUNT BRACKET

888-45-198-W-01 rev.C • 12/18
12 of 12
2.5mm
b
± 20˚
© 2014 Ergotron, Inc. All rights reserved.
www.ergotron.com | USA: 1-800-888-8458 | Europe: [phone] | China: 400-120-3051 | Japan: [email protected]
Learn more about ergonomic computer use at:
www.computingcomfort.org
Set Your Workstation to Work For YOU!
Height Position top of screen slightly below eye level.
Position keyboard at about elbow height with wrists flat.
Distance Position screen an arm's length from face—at least 20” (508mm).
Position keyboard close enough to create a 90˚angle in elbow.
Angle Tilt screen to eliminate glare.
Tilt the keyboard back 10° so that your wrists remain flat.
To Reduce Fatigue
Breathe - Breathe deeply through your nose.
Blink - Blink often to avoid dry eyes.
Break • 2 to 3 minutes every 20 minutes
• 15 to 20 minutes every 2 hours.
Increase Friction
If this product moves too easily, then
you'll need to increase friction:
Decrease Friction
If this product is too difficult to move,
then you'll need to decrease friction:
Pan – Side-to-side
NOTE: When contacting customer service, reference the serial number.
For local customer care phone numbers visit: http://contact.ergotron.com
For Service visit: www.ergotron.com
For Warranty visit: www.ergotron.com/warranty