Not for Commercial Use
Ericsson Mobile Communications AB
English 5
Instructions
Instructions in this user’s guide are based on handsfree
buttons and phone keys. For example, the button
or the YES key on the phone can be used to answer a call.
To turn the handsfree on
• Press and hold the button until you hear a short
low tone followed by a short high tone.
The handsfree indicator light flashes green. If the
battery is low, the light flashes red.
Note: The first time the handsfree is turned on it
will automatically be ready for pairing.
To turn the handsfree off
• Press and hold the button until you hear a short
high tone followed by a short low tone. The handsfree
indicator light is switched off.
Pairing the handsfree
Before you start using the handsfree for the first time,
you must pair the handsfree with the device you want
to use it with, for example, a mobile phone. This
section describes three ways of pairing the handsfree:
• With an Ericsson phone with built-in Bluetooth capability.
• With an Ericsson phone with a Bluetooth phone
adapter attached.
•With another Bluetooth device or non-Ericsson phone.
Using an ricsson phone with built-in
Bluetooth capability
You pair the handsfree with your phone by adding it
to a list of paired devices in the phone. They then
recognize each other when they connect.
To pair the handsfree with the phone
1. With the handsfree turned off, press and hold both the
and buttons for up to 10 seconds until the
indicator light on the handsfree flashes green and red.
2. In the phone, scroll to Extras or Connect, YES,
Bluetooth, YES, Paired devices, YES, Add device, YES,
Phone initiates, YES.
3. A list of device types that you can pair with your phone
appears. Scroll to eadset and press YES. Make sure
the handsfree and the phone are not too far apart.
4. B -20 appears in the display. Press YES.
5. Enter the handsfree passkey (0000) and press YES.
The phone pairing procedure starts.
6. You may now replace the given handsfree name with
a personal name tag and then press YES. When pairing
