ESAB OrigoFeed 30-2 User manual

Valid for serial no. 418--xxx--xxxx to 435--xxx--xxxx0459 508 027 040810
OrigoFeed 30- 2
OrigoFeed 30- 4
Instruction manual Èíñòðóêöèÿ ïî ýêñïëóàòàöèè

-- 2 --
Rights reserved to alter specifications without notice.
Îñòàâëÿåì çà ñîáîé ïðàâî èçìåíÿòü ñïåöèôèêàöèþ áåç ïðåäóïðåæäåíèÿ.
Ðóññêèé 3...............................................
ENGLISH 14..............................................

Ðóññêèé
TOCr -- 3 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ 4........................................
2 ÂÂÅÄÅÍÈÅ 5.......................................................
2.1 Îáîðóäîâàíèå 5...........................................................
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ 6................................
4ÓÑÒÀÍÎÂÊÀ 7.......................................................
4.1 Èíñòðóêöèè ïî ïîäúåìó 7..................................................
5 ÏÎÐßÄÎÊ ÐÀÁÎÒÛ 8...............................................
5.1 Ñîåäèíåíèÿ è óñòðîéñòâà óïðàâëåíèÿ 8.....................................
5.2 Îáúÿñíåíèå ôóíêöèîíèðîâàíèÿ 10.........................................
5.3 Äàâëåíèå ïîäà÷è ïðîâîëîêè 11..............................................
5.4 Çàìåíà è âñòàâêà ïðîâîëîêè 11..............................................
5.5 Çàìåíà ïîäàþùåãî ðîëèêà óñòðîéñòâà OrigoFeed 30-2 12......................
5.6 Çàìåíà ïîäàþùåãî ðîëèêà óñòðîéñòâà OrigoFeed 30-4 12......................
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ 12.................................
6.1 Ïðîâåðêà è î÷èñòêà 13......................................................
7 ÇÀÊÀÇ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 13.......................................
ÑÕÅÌÀ 25..............................................................
ÍÎÌÅÐ ÇÀÊÀÇÀ 27.....................................................
ÁÛÑÒÐÎÈÝÍÀØÈÂÅÌÛÅ ÄÅÒÀËÈ 28...................................
ÄÎÏÎËÍÈÒÅËÜÍÛÅ ÏÐÈÍÀÄËÅÆÍÎÑÒÈ 32...........................

bm38d1ra -- 4 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ
Ïîëüçîâàòåëè ñâàðî÷íîãî îáîðóäîâàíèÿ ESAB îòâå÷àþò çà âûïîëíåíèå ïðàâèë òåõíèêè
áåçîïàñíîñòè ëèöàìè, ðàáîòàþùèìè íà îáîðóäîâàíèè è ðÿäîì ñ íèì. Ïðàâèëà òåõíèêè
áåçîïàñíîñòè äîëæíû îòâå÷àòü òðåáîâàíèÿì ê áåçîïàñíîé ýêñïëóàòàöèè ñâàðî÷íîãî
îáîðóäîâàíèÿ ýòîãî òèïà. Ïîìèìî ñòàíäàðòíûõ ïðàâèë òåõíèêè áåçîïàñíîñòè è îõðàíû
òðóäà íà ðàáî÷åì ìåñòå ðåêîìåíäóåòñÿ ñëåäóþùåå.
Âñå ðàáîòû äîëæíû âûïîëíÿòüñÿ ïîäãîòîâëåííûìè ëèöàìè, çíàêîìûìè ñ ýêñïëóàòàöèåé
ñâàðî÷íîãî îáîðóäîâàíèÿ. Íåïðàâèëüíàÿ ýêñïëóàòàöèÿ îáîðóäîâàíèÿ ìîæåò âûçâàòü
îïàñíûì ñèòóàöèè, ïðèâîäÿùèå ê òðàâìèðîâàíèþ ïåðñîíàëà è ïîâðåæäåíèþ
îáîðóäîâàíèÿ.
1. Bñå ëèöà, èñïîëüçóþùèå ñâàðî÷íîå îáîðóäîâàíèå, äîëæíû çíàòü:
Sèíñòðóêöèè ïî ýêñïëóàòàöèè
Sðàñïîëîæåíèå îðãàíîâ àâàðèéíîãî îñòàíîâà
Síàçíà÷åíèå îáîðóäîâàíèÿ
Sïðàâèëà òåõíèêè áåçîïàñíîñòè
Sòåõíîëîãèþ ñâàðêè
2. Îïåðàòîð îáåñïå÷èâàåò:
Sóäàëåíèå ïîñòîðîííèõ ëèö èç ðàáî÷åé çîíû îáîðóäîâàíèÿ ïðè åãî çàïóñêå
Sçàùèòó âñåõ ëèö îò âîçäåéñòâèÿ ñâàðî÷íîé äóãè
3. Ðàáî÷åå ìåñòî äîëæíî:
Sîòâå÷àòü óñëîâèÿì ýêñïëóàòàöèè
Síå èìåòü ñêâîçíÿêîâ
4. Ñðåäñòâà çàùèòû ïåðñîíàëà
SÂî âñåõ ñëó÷àÿõ ðåêîìåíäóåòñÿ èñïîëüçîâàòü èíäèâèäóàëüíûå ñðåäñòâà çàùèòû,
íàïðèìåð, çàùèòíûå î÷êè, îãíåñòîéêóþ ñïåöîäåæäó è çàùèòíûå ðóêàâèöû.
SÏðè ñâàðêå çàïðåùàåòñÿ íîñèòü ñâîáîäíóþ îäåæäó, óêðàøåíèÿ è ò.ä., íàïðèìåð,
øàðôû, áðàñëåòû, êîëüöà, êîòîðûå ìîãóò ïîïàñòü â ñâàðî÷íîå îáîðóäîâàíèå èëè
âûçâàòü îæîãè.
5. Îáùèå ìåðû ïðåäîñòîðîæíîñòè
SÏðîâåðüòå íàäåæíîñòü ïîäêëþ÷åíèÿ îáðàòíîãî êàáåëÿ.
SÐàáîòû íà îáîðóäîâàíèè ñ âûñîêèì íàïðÿæåíèåì äîëæíû ïðîèçâîäèòüñÿ
òîëüêî êâàëèôèöèðîâàííûì ýëåêòðèêîì.
SÂ ïðåäåëàõ äîñòóïà äîëæíû íàõîäèòüñÿ ñîîòâåòñòâóþùèå ñðåäñòâà
ïîæàðîòóøåíèÿ, èìåþùèå ÿñíóþ ìàðêèðîâêó.
SÇàïðåùàåòñÿ ïðîâîäèòü ñìàçêó è òåõíè÷åñêîå îáñëóæèâàíèå îáîðóäîâàíèå âî
âðåìÿ ýêñïëóàòàöèè.
ÂÍÈÌÀÍÈÅ!
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî
èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
Êîìïàíèÿ ESAB ãîòîâà ïðåäîñòàâèòü âàì âñå çàùèòíîå ñíàðÿæåíèå è
ïðèíàäëåæíîñòè, íåîáõîäèìûå äëÿ âûïîëíåíèÿ ñâàðî÷íûõ ðàáîò.
Çàïðåùàåòñÿ èñïîëüçîâàòü èñòî÷íèê ïèòàíèÿ äëÿ îòòàèâàíèÿ òðóá.
ÂÍÈÌÀÍÈÅ!
Äàííîå èçäåëèå ïðåäíàçíà÷åíî òîëüêî äëÿ äóãîâîé ñâàðêè.
RU

bm38d1ra -- 5 --
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
ÇÀÙÈÒÈÒÅ ÑÅÁß È ÄÐÓÃÈÕ!
ÎÑÒÎÐÎÆÍÎ!
ÄÓÃÎÂÀß ÑÂÀÐÊÀ È ÐÅÇÊÀ ÎÏÀÑÍÛ ÊÀÊ ÄËß ÈÑÏÎËÍÈÒÅËß ÐÀÁÎÒ, ÒÀÊ È ÄËß
ÏÎÑÒÎÐÎÍÍÈÕ ËÈÖ. ÒÐÅÁÓÉÒÅ ÑÎÁËÞÄÅÍÈÅ ÂÑÅÕ ÏÐÀÂÈË ÁÅÇÎÏÀÑÍÎÑÒÈ,
ÄÅÉÑÒÂÓÞÙÈÕ ÍÀ ÎÁÚÅÊÒÅ, ÊÎÒÎÐÛÅ ÄÎËÆÍÛ Ó×ÈÒÛÂÀÒÜ ÑÂÅÄÅÍÈß ÎÁ ÎÏÀÑÍÎÑÒßÕ,
ÏÐÅÄÑÒÀÂËÅÍÍÛÅ ÈÇÃÎÒÎÂÈÒÅËÅÌ ÑÂÀÐÎ×ÍÎÃÎ ÎÁÎÐÓÄÎÂÀÍÈß.
ÎÏÀÑÍÎÑÒÜ ÑÌÅÐÒÅËÜÍÎÃÎ ÏÎÐÀÆÅÍÈß ÝËÅÊÒÐÈ×ÅÑÊÈÌ ÒÎÊÎÌ.
SÑâàðî÷íûé àãðåãàò óñòàíàâëèâàåòñÿ è çàçåìëÿåòñÿ â ñîîòâåòñòâèè ñ äåéñòâóþùèìè íîðìàìè è
ïðàâèëàìè.
SÍå äîïóñêàéòå êîíòàêòà íàõîäÿùèõñÿ ïîä íàïðÿæåíèåì äåòàëåé è ýëåêòðîäîâ ñ íåçàùèùåííûìè
÷àñòÿìèòåëà,ìîêðûìèðóêàâèöàìèèìîêðîéîäåæäîé.
SÎáåñïå÷üòå ýëåêòðè÷åñêóþ èçîëÿöèþ îò çåìëè è ñâàðèâàåìûõ äåòàëåé.
SÎáåñïå÷üòå ñîáëþäåíèå áåçîïàñíûõ ðàáî÷èõ ðàññòîÿíèé.
ÄÛÌÛ È ÃÀÇÛ ìîãóò áûòü îïàñíû äëÿ ÷åëîâåêà
SÈñêëþ÷èòå âîçìîæíîñòü âîçäåéñòâèÿ äûìîâ.
SÄëÿ èñêëþ÷åíèÿ âäûõàíèÿ äûìîâ âî âðåìÿ ñâàðêè îðãàíèçóåòñÿ îáùàÿ âåíòèëÿöèÿ ïîìåùåíèÿ, à
òàêæåâûòÿæíàÿâåíòèëÿöèÿèççîíûñâàðêè.
ÈÇËÓ×ÅÍÈÅ ÄÓÃÈ âûçûâàåò ïîðàæåíèå ãëàç è îæîãè êîæè.
SÇàùèòèòå ãëàçà è êîæó. Äëÿ ýòîãî èñïîëüçóéòå çàùèòíûå ùèòêè, öâåòíûå ëèíçû è çàùèòíóþ
ñïåöîäåæäó.
SÄëÿ çàùèòû ïîñòîðîííèõ ëèö ïðèìåíÿþòñÿ çàùèòíûå ýêðàíû èëè çàíàâåñè.
ÏÎÆÀÐÎÎÏÀÑÍÎÑÒÜ
SÈñêðû (áðûçãè ìåòàëëà) ìîãóò âûçâàòü ïîæàð. Óáåäèòåñü â îòñóòñòâèè ãîðþ÷èõ ìàòåðèàëîâ
ïîáëèçîñòè îò ìåñòà ñâàðêè.
∅ÓÌ - ×ðåçìåðíûé øóì ìîæåò ïðèâåñòè ê ïîâðåæäåíèþ îðãàíîâ ñëóõà
SÏðèìèòå ìåðû äëÿ çàùèòû ñëóõà. Èñïîëüçóéòå çàòû÷êè äëÿ óøåé èëè äðóãèå ñðåäñòâà çàùèòû
ñëóõà.
SÏðåäóïðåäèòå ïîñòîðîííèõ ëèö îá îïàñíîñòè.
ÍÅÈÑÏÐÀÂÍÎÑÒÈ -- Ïðè íåèñïðàâíîñòè îáðàòèòåñü ê ñïåöèàëèñòàì ïî ñâàðî÷íîìó
îáîðóäîâàíèþ
2 ÂÂÅÄÅÍÈÅ
Óñòðîéñòâà ïîäà÷è ïðîâîëîêè OrigoFeed 30-2 èOrigoFeed 30-4
ïðåäíàçíà÷åíû äëÿ ñâàðêè ñïîñîáàìè MIG/MAG, ñ èñïîëüçîâàíèåì èñòî÷íèêà
ïèòàíèÿ OrigoMig 405.
Îíû âûïóñêàþòñÿ â ðàçëè÷íûõ âåðñèÿõ, ñì. Ñòð. 27.
Óñòðîéñòâà ïîäà÷è ìîãóò èñïîëüçîâàòüñÿ ñ ïðîâîëîêîé íà ïðîèçâîäèìûõ
êîìïàíèåé ESAB êàòóøêàõ MarathonPact, èëè íà êàòóøêàõ Ø 300 ìì.
Áëîê ïîäà÷è ïðîâîëîêè ìîæíî óñòàíîâèòü ëèáî íà áëîêå ïèòàíèÿ,
ïîäâåøåííîì íàä ðàáî÷èì ìåñòîì íà îïîðíîì êðîíøòåéíå, ëèáî íà ïîëó ñ
èñïîëüçîâàíèåì êîìïëåêòà êîëåñ èëè áåç êîëåñ.
Àêñåññóàð² îò äëÿ èçäåëÿ ìîæíî íàéòè íà ñòðíèöå 32.
2.1 Îáîðóäîâàíèå
Âìåñòå ñ óñòðîéñòâàìè ïîäà÷è ïðîâîëîêè ïîñòàâëÿåòñÿ ðóêîâîäñòâî ïî
ýêñïëóàòàöèè è íàêëåéêè.
RU

bm38d1ra -- 6 --
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ
OrigoFeed 30--2 OrigoFeed 30--4
Èñòî÷íèê ïèòàíèÿ 42  50-60 Ãö 42  50-60 Ãö
Ïîòðåáëÿåìàÿ ìîùíîñòü 336 ÂÀ 336 ÂÀ
Ìàêñèìàëüíûé òîê ýëåêòðîäâèãàòåëÿ 3,5 A 3,5 A
Íàñòðîå÷íûå äàííûå
Ñêîðîñòü ïîäà÷è ïðîâîëîêè
Âðåìÿ ïåðåõîäà äóãè
Äëèòåëüíîñòü òî÷å÷íîé ñâàðêè
1,5 - 25,0 ì/ìèí
0-0,7ñ
-
1,5 - 25,0 ì/ìèí
0-0,7ñ
0,2-5ñ
Ñîåäèíåíèå ïèñòîëåòà EURO EURO
Ìàêñ. äèàìåòð êàòóøêè ñ ïðîâîëîêîé 300 ìì 300 ìì
Äèàìåòð ïðîâîëîêè
Fe
Ss
Al
Ïðîâîëîêà ñ ñåðäå÷íèêîì
0,6 - 2,4 ìì
0,6 - 2,4 ìì
1,0 - 2,4 ìì
0,8 - 2,4 ìì
0,6  1,6 ìì
0,6 - 2,4 ìì
1,0  1,6 ìì
0,8  1,6 ìì
Ìàññà 59 êã 59 êã
Ãàáàðèòíûå ðàçìåðû, Ä x Ø x  569 x 259 x 496 ìì 569 x 259 x 496 ìì
Çàùèòíûé ãàç:
ìàêñèìàëüíîå äàâëåíèå
Ãà ç û ä ë ÿ ñ â à ð ê è
ñïîñîáàìè MIG/MAG
5áàð
Ãà ç û ä ë ÿ ñ â à ð ê è
ñïîñîáàìè MIG/MAG
5áàð
Ìàêñèìàëüíàÿ äîïóñòèìàÿ íàãðóçêà
ïðè
ðàáî÷åì öèêëå 60%
ðàáî÷åì öèêëå 100%
365 A
280 A
365 A
280 A
Êëàññ çàùèòû êîðïóñà
Áàçîâîå èñïîëíåíèå
ñ ãåðìåòè÷íûì äåðæàòåëåì êàòóøêè
ñ êàòóøêîé MarathonPact
IP2X
IP23
IP23
IP2X
IP23
IP23
* Ïðèíàäëåæíîñòè, ñì. ñòð. 32.
Êëàññ êîæóõà
Íîðìû IP óêàçûâàþò êëàññ êîæóõà, ò.å., ñòåïåíü çàùèòû îò ïðîíèêíîâåíèÿ òâåðäûõ
îáúåêòîâ è âîäû. Îáîðóäîâàíèå, ìàðêèðîâàííîå êàê IP 2X, ïðåäíàçíà÷åíî äëÿ ðàáîòû â
çàêðûòîì ïîìåùåíèè.
Êëàññ êîæóõà
Íîðìû IP óêàçûâàþò êëàññ êîæóõà, ò.å., ñòåïåíü çàùèòû îò ïðîíèêíîâåíèÿ òâåðäûõ
îáúåêòîâ è âîäû. Îáîðóäîâàíèå ñ ìàðêèðîâêîé IP 23 ïðåäíàçíà÷åíî äëÿ íàðóæíîé è
âíóòðåííåé óñòàíîâêè.
Ðàáî÷èé öèêë
Ðàáî÷èé öèêë ïðåäñòàâëÿåò ñîáîé äîëþ (â %%) äåñÿòèìèíóòíîãî èíòåðâàëà, â òå÷åíèå
êîòîðîé ìîæíî ïðîèçâîäèòü ñâàðêó ïðè îïðåäåëåííîé íàãðóçêå áåç ïåðåãðóçêè.
RU

bm38d1ra -- 7 --
4ÓÑÒÀÍÎÂÊÀ
Ââîä â ýêñïëóàòàöèþ äîëæåí ïðîèçâîäèòüñÿ êâàëèôèöèðîâàííûì
ñïåöèàëèñòîì.
ÂÍÈÌÀÍÈÅ!
Íàñòîÿùåå èçäåëèå ïðåäíàçíà÷åíî äëÿ ïðîìûøëåííîãî èñïîëüçîâàíèÿ. Ïðè
èñïîëüçîâàíèè â áûòîâûõ óñëîâèÿõ îíî ìîæåò ñîçäàâàòü ðàäèî÷àñòîòíûå ïîìåõè.
Ïîëüçîâàòåëü îòâå÷àåò çà ïðèíÿòèå ñîîòâåòñòâóþùèõ ìåð ïðåäîñòîðîæíîñòè.
ÂÍÈÌÀÍÈÅ!
Ïðè ïðîâåäåíèè ñâàðêè â óñëîâèÿõ ïîâûøåííîé îïàñíîñòè ïîðàæåíèÿ ýëåêòðè÷åñêèì
òîêîì ðàçðåøàåòñÿ èñïîëüçîâàòü òîëüêî èñòî÷íèêè ïèòàíèÿ â ñîîòâåòñòâóþùåì
áåçîïàñíîì èñïîëíåíèè. Òàêèå èñòî÷íèêè ïèòàíèÿ ïîìå÷åíû ñèìâîëîì .
4.1 Èíñòðóêöèè ïî ïîäúåìó
Íîìåð çàêàçà äëÿ ïîäúåìíîé ïðîóøèíû ìîæíî íàéòè íà ñòðàíèöå 32.
Âíèìàíèå! Ïðè èñïîëüçîâàíèè äðóãîãî ìîíòàæíîãî óñòðîéñòâà, åãî ñëåäóåò
èçîëèðîâàòü îò áëîêà ïîäà÷è ïðîâîëîêè.
RU

bm38d1ra -- 8 --
5 ÏÎÐßÄÎÊ ÐÀÁÎÒÛ
Îáùèå ïðàâèëà òåõíèêè áåçîïàñíîñòè ïðè ðàáîòå ñ îáîðóäîâàíèåì
ïðèâîäÿòñÿ íà ñòð. 4. Ïðî÷òèòå èõ äî èñïîëüçîâàíèÿ îáîðóäîâàíèÿ!
Ïðåäóïðåæäåíèå!
Óáåäèòåñü, ÷òî áîêîâûå ïàíåëè çàêðûòû âî âðåìÿ ðàáîòû.
Äëÿ ïðåäîòâðàùåíèÿ ñîñêàëüçûâàíèÿ êàòóøêè ñ ïðîâîëîêîé ñî
âòóëêè çàôèêñèðóéòå åå ïîâîðîòîì êðàñíîé êíîïêè êàê ïîêàçàíî
íà ðèñóíêå ðÿäîì ñî âòóëêîé.
ÏÐÅÄÓÏÐÅÆÄÅÍÈÅ !
ÎÑÒÎÐÎÆÍÎ !
Ñîáëþäàéòå îñòîðîæíîñòü! Âðàùàþùèåñÿ äåòàëè ìîãóò íàíåñòè
òðàâìû!
ÎÑÒÎÐÎÆÍÎ!
Ïðè èñïîëüçîâàíèè àãðåãàòà ïîäà÷è ïðîâîëîêè ñ ïðîòèâîâåñîì âîçíèêàåò îïàñíîñòü
îïðîêèäûâàíèÿ. Çàêðåïèòå îáîðóäîâàíèå - îñîáåííî åñëè îíî óñòàíîâëåíî íà
íåðîâíîé èëè íàêëîííîé ïîâåðõíîñòè.
Ïðè ïåðåìåùåíèè îáîðóäîâàíèÿ èñïîëüçóéòå ñïåöèàëüíóþ ðóêîÿòêó.
Âíèìàíèå! Íå íàäàâëèâàéòå íà ñâàðî÷íûé ïèñòîëåò.
5.1 Ñîåäèíåíèÿ è óñòðîéñòâà óïðàâëåíèÿ
Ïîäêëþ÷åíèå óïðàâëÿþùåãî êàáåëÿ
Ïðè ïîäêëþ÷åíèè óïðàâëÿþùåãî
êàáåëÿ âàæíî îáåñïå÷èòü åãî
ôèêñàöèþ ïðè ïîìîùè ðàçãðóçî÷íîé
âòóëêè.
Óáåäèòåñü, ÷òî êðåïëåíèå êðûøêè
âèíòàìè ïðîèçâåäåíî äîëæíûì
îáðàçîì.
RU

bm38d1ra -- 9 --
OrigoFeed 30-2
1Ðó÷êà çàäàíèÿ ñêîðîñòè ïîäà÷è
ïðîâîëîêè
4Ïîäñîåäèíåíèå ñâàðî÷íîãî ïèñòîëåòà
2Ðó÷êà íàñòðîéêè âðåìåíè ïåðåõîäà
äóãè
5Ïîäñîåäèíåíèå ñâàðî÷íîé öåïè ê
èñòî÷íèêó ïèòàíèÿ, (OKC)
3Ïåðåêëþ÷àòåëü äëÿ 2-øàãîâîãî /
4-øàãîâîãî ðåæèìà
6Ïîäñîåäèíåíèå çàùèòíîãî ãàçà
7Ïîäñîåäèíåíèå óïðàâëÿþùåãî êàáåëÿ
îò èñòî÷íèêà ïèòàíèÿ
OrigoFeed 30-4
1Ðó÷êà çàäàíèÿ ñêîðîñòè ïîäà÷è
ïðîâîëîêè
6Ïîäñîåäèíåíèå ñâàðî÷íîãî ïèñòîëåòà
2Ïåðåêëþ÷àòåëü äëÿ àêòèâèçàöèè
ðåæèìîâ: 2/4-øàãîâîãî, òî÷å÷íîé
ñâàðêè, õîëîäíîé ïîäà÷è ïðîâîëîêè
èëèïðîäóâêèãàçîì
7Ïîäñîåäèíåíèå ñâàðî÷íîé öåïè ê
èñòî÷íèêó ïèòàíèÿ, (OKC)
3Ðó÷êà çàäàíèÿ äëèòåëüíîñòü òî÷å÷íîé
ñâàðêè
8Ïîäñîåäèíåíèå çàùèòíîãî ãàçà
4Ðó÷êà íàñòðîéêè âðåìåíè ïåðåõîäà
äóãè
9Ïîäñîåäèíåíèå óïðàâëÿþùåãî êàáåëÿ
îò èñòî÷íèêà ïèòàíèÿ
5Ïåðåêëþ÷àòåëü ”ÂÊË. / ÂÛÊË.” äëÿ
ïóñêà ìåäëåííîé ïîäà÷è
RU

bm38d1ra -- 1 0 --
5.2 Îáúÿñíåíèå ôóíêöèîíèðîâàíèÿ
Ñêîðîñòü ïîäà÷è ïðîâîëîêè
Ýòîò ïàðàìåòð îïðåäåëÿåò òðåáóåìóþ ñêîðîñòü ïîäà÷è ïðèñàäî÷íîé
ïðîâîëîêè â ì/ìèí.
2-øàãîâûé ðåæèì
 2-øàãîâîì ðåæèìå, ïîñëå íàæàòèÿ ïåðåêëþ÷àòåëÿ íà÷èíàåòñÿ ïîäà÷à ãàçà,
çàòåì íà÷èíàåòñÿ ïîäà÷à ïðîâîëîêè. Ïðîöåññ ñâàðêè çàâåðøàåòñÿ ïîñëå
îòïóñêàíèÿ ïåðåêëþ÷àòåëÿ, ïðè ýòîì ïðåêðàùàåòñÿ ïîäà÷à ïðîâîëîêè è
ïîäà÷à ãàçà.
4-øàãîâûé ðåæèì
 4-øàãîâîì ðåæèìå ïîäà÷à ãàçà íà÷èíàåòñÿ, êîãäà ïåðåêëþ÷àòåëü
íàæèìàåòñÿ, à ïîäà÷à ïðîâîëîêè íà÷èíàåòñÿ, êîãäà îí îòïóñêàåòñÿ. Ïðîöåññ
ñâàðêè ïðîäîëæàåòñÿ äî òåõ ïîð, ïîêà ïåðåêëþ÷àòåëü íå áóäåò ñíîâà íàæàò,
ïîñëå ÷åãî ïîäà÷à ïðîâîëîêè îñòàíàâëèâàåòñÿ. Êîãäà ïåðåêëþ÷àòåëü
îòïóñêàåòñÿ, ïðåêðàùàåòñÿ ïîäà÷à ãàçà.
Òî÷å÷íàÿ ñâàðêà
Ðåæèì òî÷å÷íîé ñâàðêè èñïîëüçóåòñÿ, êîãäà âû õîòèòå ïðîèçâåñòè ñâàðêó íà
êîðîòêèõ, ïîâòîðÿþùèõñÿ ó÷àñòêàõ, ñ ïðåäâàðèòåëüíî çàäàííîé
ïðîäîëæèòåëüíîñòüþ ñâàðêè.
Ïðè íàæàòèè ïåðåêëþ÷àòåëÿ íà÷èíàåòñÿ ïîäà÷à ãàçà, è ïðîäîëæàåòñÿ â
òå÷åíèå âðåìåíè, êîòîðîå ðåãóëèðóåòñÿ ñõåìîé íà ïå÷àòíîé ïëàòå. Ïîñëå ýòîãî
íà÷èíàåòñÿ ïðîöåññ ñâàðêè ñ çàäàííîé äëèòåëüíîñòüþ. Ïî çàâåðøåíèè
ïðîöåññà ñâàðêè ïîäà÷à ãàçà ïðåêðàùàåòñÿ.
Õîëîäíàÿ ïîäà÷à ïðîâîëîêè
Ðåæèì õîëîäíîé ïîäà÷è ïðîâîëîêè èñïîëüçóåòñÿ äëÿ òîãî, ÷òîáû ïîäà÷à
ïðîâîëîêè îñóùåñòâëÿëàñü áåç âêëþ÷åíèÿ ñâàðî÷íîãî íàïðÿæåíèÿ è ïîäà÷è
ãàçà.
Àêòèâèçàöèÿ õîëîäíîé ïîäà÷è ïðîâîëîêè: íàæìèòå âûêëþ÷àòåëü, ïîñëå ÷åãî
íà÷íåòñÿ ïîäà÷à ïðîâîëîêè.
Ïðîäóâêà ãàçîì
Ïðîäóâêà ãàçîì èñïîëüçóåòñÿ äëÿ òîãî, ÷òîáû èçìåðèòü ðàñõîä ãàçà, èëè äëÿ
î÷èñòêè ãàçîâûõ øëàíãîâ, ñ òåì ÷òîáû ïåðåä íà÷àëîì ñâàðêè óäàëèòü èç íèõ
âîçäóõ è âëàãó. Ïðè ïðîäóâêå ãàçîì äîëæíî áûòü âûêëþ÷åíî íàïðÿæåíèå è
îñòàíîâëåíà ïîäà÷à ïðîâîëîêè.
Àêòèâèçàöèÿ ôóíêöèè ïðîäóâêè ãàçîì: Íàæìèòå âûêëþ÷àòåëü, ïîñëå ÷åãî
íà÷íåòñÿ ïðîäóâêà ãàçîì.
RU

bm38d1ra -- 1 1 --
Âðåìÿ ïåðåõîäà äóãè
Âðåìÿ ïåðåõîäà äóãè ýòî çàäåðæêà ìåæäó ìîìåíòîì, êîãäà íà÷èíàåòñÿ
òîðìîæåíèå ïðîâîëîêè, è ìîìåíòîì, êîãäà èñòî÷íèê ïèòàíèÿ îòêëþ÷àåò
ñâàðî÷íûé òîê. Ñëèøêîì êîðîòêîå âðåìÿ ïåðåõîäà äóãè ïðèâîäèò ê
îáðàçîâàíèþ äëèííîãî âûñòóïàþùåãî êîíöà ïðèñàäî÷íîé ïðîâîëîêè, â
ðåçóëüòàòå ÷åãî âîçíèêàåò îïàñíîñòü òîãî, ÷òî ïðîâîëîêà îêàæåòñÿ âïëàâëåíà
â òâåðäåþùèé ñâàðî÷íûé øîâ. Ñëèøêîì ïðîäîëæèòåëüíîå âðåìÿ ïåðåõîäà
äóãè ïðèâîäèò ê îáðàçîâàíèþ êîðîòêîãî âûñòóïàþùåãî êîíöà, â ðåçóëüòàòå
÷åãî âîçíèêàåò îïàñíîñòü òîãî, ÷òî äóãà ïåðåêèíåòñÿ íà êîíòàêòíóþ êðîìêó.
Çàïóñê ìåäëåííîé ïîäà÷è
Çàïóñê ìåäëåííîé ïîäà÷è îçíà÷àåò, ÷òî ïðîâîëîêà ïîäàåòñÿ ñ ìàëîé
ñêîðîñòüþ äî òåõ ïîð, ïîêà îíà íå ïðèäåò â ñîñòîÿíèå ýëåêòðè÷åñêîãî
êîíòàêòà ñ çàãîòîâêîé, ïîñëå ÷åãî ñêîðîñòü óâåëè÷èâàåòñÿ äî çàäàííîé
óñòàâêè.
5.3 Äàâëåíèå ïîäà÷è ïðîâîëîêè
Ïðåæäå âñåãî óáåäèòåñü â òîì, ÷òî ïðîâîëîêà áåñïðåïÿòñòâåííî äâèæåòñÿ
÷åðåç íàïðàâëÿþùèå. Ïîñëå ýòîãî óñòàíîâèòå óñèëèå, ñîçäàâàåìîå
ðîëèêàìè ïîäà÷è ïðîâîëîêè. Ïîìíèòå, ÷òî ýòî óñèëèå íå äîëæíî áûòü
÷ðåçìåðíûì.
Ðèñ. 1 Ðèñ. 2
Äëÿ ïðîâåðêè ïðàâèëüíîñòè óñòàíîâêè óñèëèÿ ïîäà÷è ïîìåñòèòå êàêîé-ëèáî
òâåðäûé ïðåäìåò, íàïðèìåð, äåðåâÿííûé áðóñîê íà ïóòè ïîäà÷è ïðîâîëîêè.
Ïðè ðàññòîÿíèè ïðèìåðíî 5 ìì îò ïèñòîëåòà äëÿ ïîäà÷è ïðîâîëîêè äî
äåðåâÿííîãî áðóñêà (ðèñ. 1) ïîäàþùèå ðîëèêè äîëæíû ïðîñêàëüçûâàòü.
Ïðè ðàññòîÿíèè ïðèìåðíî 50 ìì ïðîâîëîêà äîëæíà ïîäàâàòüñÿ è ñãèáàòüñÿ
ïðè óïîðå â áðóñîê (ðèñ. 2).
5.4 Çàìåíà è âñòàâêà ïðîâîëîêè
SÎòêðîéòå áîêîâóþ ïàíåëü.
SÎòñîåäèíèòå äàò÷èê äàâëåíèÿ, îòêèíóâ åãî íàçàä, ïðè ýòîì íàæèìíûå
ðîëèêè ïåðåäâèíóòñÿ ââåðõ.
SÂûïðÿìèòå ó÷àñòîê íîâîé ïðîâîëîêè äëèíîé 10-20 ñì. Ïðåæäå ÷åì
âñòàâèòü ïðîâîëîêó â óñòðîéñòâî, îáðàáîòàéòå åå êîí÷èê íàïèëüíèêîì 
óäàëèòå çàóñåíöû è îñòðûå êðîìêè.
RU

bm38d1ra -- 1 2 --
SÓáåäèòåñü â òîì, ÷òî ïðîâîëîêà ïðàâèëüíî ïîäàåòñÿ â êàíàâêó ïîäàþùåãî
ðîëèêà è â âûïóñêíóþ íàñàäêó èëè íàïðàâëÿþùóþ äëÿ ïðîâîëîêè.
SÑëîæèòå íàæèìíîé ðû÷àã è çàôèêñèðóéòå åãî íà äàò÷èêå äàâëåíèÿ.
SÇàêðîéòå áîêîâóþ ïàíåëü.
5.5 Çàìåíà ïîäàþùåãî ðîëèêà óñòðîéñòâà OrigoFeed 30-2
SÎòêðîéòå áîêîâóþ ïàíåëü.
SÎòîñåäèíèòå äàò÷èê äàâëåíèÿ (1), îòêèíóâ åãî
íàçàä.
SÎòâåðíèòå è èçâëåêèòå óñòàíîâî÷íûé âèíò (2) ñ
øàéáîé.
SÈçâëåêèòå ïîäàþùèå ðîëèêè (3).
Äëÿ óñòàíîâêè ïîâòîðèòå âûøåîïèñàííûå
îïåðàöèè â îáðàòíîì ïîðÿäêå.
Âûáîð êàíàâîê â ïîäàþùèõ ðîëèêàõ
Ïîâåðíèòå ïîäàþùèé ðîëèê òàê, ÷òîáû ðàçìåðíàÿ
ìåòêàòðåáóåìîéêàíàâêèáûëàîáðàùåíàêâàì.
5.6 Çàìåíà ïîäàþùåãî ðîëèêà óñòðîéñòâà OrigoFeed 30-4
SÎòêðîéòå áîêîâóþ ïàíåëü.
SÎòñîåäèíèòå äàò÷èê äàâëåíèÿ (1), îòêèíóâ åãî
âïåðåä.
SÎòñîåäèíèòå ïîäàþùèå ðîëèêè (2), îòâèíòèâ
ãàéêè (3) è âûòÿíóâ ðîëèêè íàðóæó.
Äëÿ óñòàíîâêè ïîâòîðèòå âûøåîïèñàííûå
îïåðàöèè â îáðàòíîì ïîðÿäêå.
Âûáîð êàíàâîê â ïîäàþùèõ ðîëèêàõ
Ïîâåðíèòå ïîäàþùèé ðîëèê òàê, ÷òîáû ðàçìåðíàÿ
ìåòêàòðåáóåìîéêàíàâêèáûëàîáðàùåíàêâàì.
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ
Ðåãóëÿðíîå òåõíè÷åñêîå îáñëóæèâàíèå èìååò âàæíîå çíà÷åíèå äëÿ
îáåñïå÷åíèÿ áåçîïàñíîñòè è íàäåæíîñòè.
Ïðèìå÷àíèå:
à àðàíìèéíú²å îáÿçàìåëüñòâà ïîñòàâùèêà òåðÿþò ñèëó, åñëè ïîêóïàòåëú
ñàìîñòîÿòåëúíî ïûòàåòñÿ ïðîèçâåñòè êàêèå-ëèáî ðàáîòû ïî óñòðàíåíèþ
íåèñïðàâíîñòåé èçäåëèÿ â òå÷åíèå ãàðàíòèéíîãî ñðîêà.
RU

bm38d1ra -- 1 3 --
6.1 Ïðîâåðêà è î÷èñòêà
Áëîê ïîäà÷è ïðîâîëîêè
Ðåãóëÿðíî ïðîâåðÿéòå, ÷òîáû áëîê ïîäà÷è ïðîâîëîêè íå áûë çàáèò ãðÿçüþ.
SÄëÿ îáåñïå÷åíèÿ áåñïåðåáîéíîé ïîäà÷è ïðîâîëîêè ñëåäóåò ñ
óñòàíîâëåíîé ïåðèîäè÷íîñòüþ âûïîëíÿòü î÷èñòêó è çàìåíó
èçíàøèâàåìûõ êîìïîíåíòîâ ìåõàíèçìà áëîêà ïîäà÷è. Èìåéòå ââèäó, ÷òî
åñëè ïðåäâàðèòåëüíîå íàòÿæåíèå óñòàíîâëåíî ñëèøêîì ñèëüíûì, òî ýòî
ìîæåò ïðèâåñòè ê ïîâûøåííîìó èçíîñó ïðèæèìíûõ ðîëèêîâ, ïîäàþùèõ
ðîëèêîâ è íàïðàâëÿþùèõ äëÿ ïðîâîëîêè.
Òîðìîçíàÿ âòóëêà.
Òîðìîçíàÿ âòóëêà ðåãóëèðóåòñÿ ïåðåä
ïîñòàâêîé èçäåëèÿ. Ïðè íåîáõîäèìîñòè
ïîâòîðíîé ðåãóëèðîâêè ïðèäåðæèâàéòåñü
óêàçàíèé ïðèâåäåííûõ íèæå. Ïðè ïðàâèëüíî
îòðåãóëèðîâàííîé òîðìîçíîé âòóëêå
ïðîâîëîêà äîëæíà íåñêîëüêî
ïðîâèñàòü ïîñëå îñòàíîâêè ïîäà÷è.
SÐåãóëèðîâêà òîðìîçíîãî óñèëèÿ:
SÓñòàíîâèòü êðàñíóþ ðóêîÿòêó â ïîëîæåíèå áëîêèðîâêè
SÂñòàâèòü îòâåðòêó â ïðóæèíû èìåþùèåñÿ âî âòóëêå.
Äëÿ óìåíüøåíèÿ òîðìîçíîãî óñèëèÿ ïîâåðíóòü ïðóæèíû ïî ÷àñîâîé
ñòðåëêå.
Äëÿ óâåëè÷åíèÿ òîðìîçíîãî óñèëèÿ ïîâåðíóòü ïðóæèíû ïðîòèâ ÷àñîâîé
ñòðåëêè. Ïðèìå÷àíèå: Îáå ïðóæèíû ñëåäóåò ïîâîðà÷èâàòü íà
îäèíàêîâîå ÷èñëî îáîðîòîâ.
Ñâàðî÷íàÿ ãîðåëêà
SÄëÿ îáåñïå÷åíèÿ áåñïåðåáîéíîé ïîäà÷è ïðîâîëîêè ñëåäóåò ñ
óñòàíîâëåííîé ïåðèîäè÷íîñòüþ âûïîëíÿòü ÷èñòêó è çàìåíó
èçíàøèâàåìûõ êîìïîíåíòîâ ñâàðî÷íîé ãîðåëêè. Ðåãóëÿðíî äî÷èñòà
ïðîäóâàéòå íàïðàâëÿþùèå äëÿ ïðîâîëîêè è î÷èùàéòå êîíòàêòíóþ ãóáêó.
7 ÇÀÊÀÇ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ
Ðàáîòû ïî ðåìîíòó è ýëåêòðè÷åñêîìó ìîíòàæó äîëæíû âûïîëíÿòüñÿ
êâàëèôèöèðîâàííûì ñïåöèàëèñòîì ESAB .
Íåîáõîäèìî èñïîëüçîâàòü òîëüêî çàïàñíûå ÷àñòè, âûïóùåííûå ôèðìîé
ESAB.
Çàïàñíûå ÷àñòè ìîæíî çàêàçòú ó áëèæàéøåãî ê Âàì ESAB, (ñì. ïåðå÷åíú íà
ïîñëåäíåé ñòðàíèöå äàííîé áðîøþðû).
RU

ENGLISH
-- 1 4 --
TOCe
1 DIRECTIVE 15........................................................
2SAFETY 15...........................................................
3 INTRODUCTION 16...................................................
3.1 Equipment 16................................................................
4 TECHNICAL DATA 17.................................................
5 INSTALLATION 17....................................................
5.1 Lifting instructions 18.........................................................
6 OPERATION 18.......................................................
6.1 Connections and control devices 19............................................
6.2 Explanation of function 20.....................................................
6.3 Wire feed pressure 21........................................................
6.4 Replacing and inserting wire 22................................................
6.5 Changing feed roller OrigoFeed 30--2 22........................................
6.6 Changing feed roller OrigoFeed 30--4 22........................................
7 MAINTENANCE 23....................................................
7.1 Inspection and cleaning 23....................................................
8 ORDERING SPARE PARTS 23..........................................
DIAGRAM 25............................................................
ORDERING NUMBER 27.................................................
WEAR COMPONENTS 28.................................................
ACCESSORIES 32.......................................................

-- 1 5 --
bm38d1ea
1DIRECTIVE
DECLARATION OF CONFORMITY
ESAB Welding Equipment AB, SE--695 81 Laxå, Sweden, declares that Wire feed unit OrigoFeed
30--4 from serial number 418 onwards, conforms to standard IEC/EN 60974--5, in accordance with the
requirements of directive (73/23/EEC) and appendix (93/68/EEC) and standard IEC/EN 60974--10 in
accordance with the requirements of directive (89/336/EEC) and appendix (93/68/EEC).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
Henry Selenius
Managing Director
ESAB Welding Equipment AB
695 81 LAXÅ
SWEDEN Tel: + 46 584 81000 Fax: + 46 584 411924
Laxå 2004--04--20
2SAFETY
Users of ESAB welding equipment have the ultimate responsibility for ensuring that anyone who
works on or near the equipment observes all the relevant safety precautions. Safety precautions
must meet the requirements that apply to this type of welding equipment. The following recommen-
dations should be observed in addition to the standard regulations that apply to the workplace.
All work must be carried out by trained personnel well--acquainted with the operation of the welding
equipment. Incorrect operation of the equipment may lead to hazardous situations which can result
in injury to the operator and damage to the equipment.
1. Anyone who uses the welding equipment must be familiar with:
Sits operation
Slocation of emergency stops
Sits function
Srelevant safety precautions
Swelding
2. The operator must ensure that:
Sno unauthorized person is stationed within the working area of the equipment when it is
started up.
Sno--one is unprotected when the arc is struck
3. The workplace must:
Sbe suitable for the purpose
Sbe free from drafts
4. Personal safety equipment
SAlways wear recommended personal safety equipment, such as safety glasses, flame--proof
clothing, safety gloves.
SDo not wear loose--fitting items, such as scarves, bracelets, rings, etc., which could become
trapped or cause burns.
5. General precautions
SMake sure the return cable is connected securely.
SWork on high voltage equipment may only be carried out by a qualified electrician.
SAppropriate fire extinquishing equipment must be clearly marked and close at hand.
SLubrication and maintenance must not be carried out on the equipment during operation.
WARNING!
Read and understand the instruction manual before installing
or operating.
GB

-- 1 6 --
bm38d1ea
WARNING
READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.
ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAU-
TIONS WHEN WELDING. ASK FOR YOUR EMPLOYER’S SAFETY PRACTICES WHICH SHOULD BE
BASED ON MANUFACTURERS’ HAZARD DATA.
ELECTRIC SHOCK -- Can kill
SInstall and earth the welding unit in accordance with applicable standards.
SDo not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
SInsulate yourself from earth and the workpiece.
SEnsure your working stance is safe.
FUMES AND GASES -- Can be dangerous to health
SKeep your head out of the fumes.
SUse ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
and the general area.
ARC RAYS -- Can injure eyes and burn skin.
SProtect your eyes and body. Use the correct welding screen and filter lens and wear protective
clothing.
SProtect bystanders with suitable screens or curtains.
FIRE HAZARD
SSparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
NOISE -- Excessive noise can damage hearing
SProtect your ears. Use earmuffs or other hearing protection.
SWarn bystanders of the risk.
MALFUNCTION -- Call for expert assistance in the event of malfunction.
PROTECT YOURSELF AND OTHERS!
ESAB can provide you with all necessary welding protection and accessories.
Do not use the power source for thawing frozen pipes.
WARNING!
This product is solely intended for arc welding.
3 INTRODUCTION
The OrigoFeed 30--2 and OrigoFeed 30--4 wire feed units are intended for
MIG/MAG welding with the OrigoMig 405 power source.
They come in different variants, see page 27.
The feed units can be used together with wire on ESAB’s MarathonPact, or on wire
bobbin Ø 300 mm.
They can be installed either at the power source, suspended above the workplace,
on a support arm or on the floor with or without wheel set.
ESAB’s accessories for the product can be found on page 32.
3.1 Equipment
The wire feed units are supplied with an instruction manual and stickers.
GB

-- 1 7 --
bm38d1ea
4 TECHNICAL DATA
OrigoFeed 30--2 OrigoFeed 30--4
Power supply 42 V 50--60 Hz 42 V 50--60 Hz
Power requirement 336 VA 336 VA
Motor current Imax 3.5 A 3.5 A
Settings data
Wire feed speed
Burnback time
Spot welding time
1.5--22.0 m/min
0--0.7 s
--
1.5--22.0 m/min
0--0.7 s
0.2--5 s
Gun connection EURO EURO
Max. diameter wire bobbin 300 mm 300 mm
Wire dimension
Fe
Ss
Al
Cored wire
0.6--1.2 mm
0.6--1.2 mm
1.0--1.2 mm
0.8--1.2 mm
0.6--1.6 mm
0.6--1.2 mm
1.0--1.6 mm
0.8--1.6 mm
Weight 12.6 kg 13.2 kg
Dimensions (l x b x h) 569 x 259 x 355 mm 569 x 259 x 355 mm
Shielding gas
max pressure
Gases for MIG/MAG welding
5 bar
Gases for MIG/MAG welding
5 bar
Maximum permissible load at
60% duty cycle
100% duty cycle
365 A
280 A
365 A
280 A
Enclosure class
basic version
with sealed bobbin holder*
with MarathonPact
IP2X
IP23
IP23
IP2X
IP23
IP23
* Accessories, see page 32.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Apparatus marked IP2X are intended for indoor use.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP23 is designed for indoor and outdoor use.
Duty cycle
The duty cycle refers to the time as a percentage of a ten--minute period that you can weld at a cer-
tain load without overloading.
5 INSTALLATION
The installation must be executed by a professional.
GB

-- 1 8 --
bm38d1ea
WARNING!
This product is intended for industrial use. In a domestic environment this product may cause radio
interference. It is the user’s responsibility to take adequate precautions.
WARNING!
When welding in an environment with increased electrical danger, only power sources intended
for this environment may be used. These power sources are marked with the symbol .
5.1 Lifting instructions
Order number for lifting eyelet can be found on page 32.
Note! If another mounting device is used, this should be insulated from the wire feed
unit.
6OPERATION
General safety regulations for the handling of the equipment can be found on
page 15. Read through before you start using the equipment!
WARNING!
Assure that the side panels are closed during operation.
To prevent the reel from sliding off the hub: Lock the reel in place by
turning the red knob as shown on the warning label attached next to
the hub.
WARNING!
GB

-- 1 9 --
bm38d1ea
WARNING!
Rotating parts can cause injury, take great care.
WARNING!
There is a risk of tipping if the wire feed unit is fitted with a counterbalance arm. Secure the
equipment, especially if used on an uneven or sloping surface.
When moving the equipment use intended handle. NOTE! Never pull on the gun.
6.1 Connections and control devices
Connecting control cable
When connecting the control cable, it is
important to secure the cable with the
load--removing grommet.
Ensure that the cover is properly screwed
into place.
OrigoFeed 30--2
1Knob for setting wire feed speed 4Connection for welding gun
2Knob for setting burnback time 5Connection for welding current from power
source, (OKC)
3Switch for 2--stroke / 4--stroke 6Connection for shielding gas
7Connection for control cable from power
source
GB

-- 2 0 --
bm38d1ea
OrigoFeed 30--4
1Knob for setting wire feed
speed 6Connection for welding gun
2Switch for activation of 2/4 stroke, spot
welding, cold wire feed or gas purging 7Connection for welding current from power source, (OKC)
3Knob for setting spot welding time 8Connection for shielding gas
4Knob for setting burnback time 9Connection for control cable from power
source
5Switch for creep start OFF / ON
6.2 Explanation of function
Wire feed speed
This sets the required feed speed of the filler wire in m/minute.
2stroke
With 2--stroke, the gas flow starts followed by the wire feed when the trigger switch is
pressed in. The welding process is concluded when the trigger switch is released,
the wire feed stops and the gas stops flowing.
4stroke
With 4 stroke, the gas flow starts when the trigger switch is pressed in and the wire
feed starts when it is released. The welding process continues until the switch is
pressed in again, the wire feed stops and when the switch is released the gas stops
flowing.
Spot welding
Spot welding is used when you want to weld on short, repeated occasions with a
pre--set time.
When the trigger switch is pressed in, the gas flow starts for a period of time
governed by the printed circuit board. After this the welding process starts for the set
time. When the welding process is complete, the gas flow stops.
GB