ESET CYBERSECURITY - User manual

Quick Start Guide

ESETCybersecurity provides state-of-the-art protection for your computer against
malicious code. Based on the ThreatSense® scanning engine first introduced in the
award-winning NOD32 antivirus system, ESETCybersecurity continues to deliver
unprecedented protection against zero-day threats, without the need for constant
signature updates to recognize the threats. This manual will guide you step-by-step
through the quick setup and configuration of the product.
Antispyware: Protects you from hidden
backdoors, downloaders, exploits, crackers,
hijackers, password stealers, key loggers
andproxies.
Antivirus: Proactively detects and disables
more known and even unknown new
malware threats than any other security
product.

Protection status informs you about the current
protection level of your computer and security.
A computer scan is an important part of each
antivirus solution. It is used to perform ascan of the
fi les and folders onyour computer’s disk(s).
The Update section contains important information
about the program updates. It is vitally important
for the program toupdate regularly to provide the
maximum level of protection against thelatest
threats.
Setup options allow you to adjust the protection levels
ofyour computer.
The Tools section, available in extended mode, allows
you to enter advanced features: log fi les, quarantine and
scheduler.
Comprehensive help and support for ESETCybersecurity.
You can also contact ESET technical support directly
from here.
Protection status informs you about the current

Before you begin the installation
process, please close all open programs
on your computer. ESETCybersecurity
contains components that may
confl ict with other antivirus programs
that may already be installed on your
computer. ESET strongly recommends
that you remove any other programs
to prevent potential problems. You
can install ESETCybersecurity from an
installation CD or from afi le available
on the ESET website.
To launch the installer wizard, do one
of the following:
• If you are instal ling from the
installation CD, insert the CD into the
CDROM drive and the menu screen
will appear. Doubleclick on the ESET
Cybersecurity Installation icon to
launch the installer.
Installation
• If you are installing from adown
loaded file, doubleclick the file you
downloaded to launch the installer.
After launching the installer and
accepting the license agreement,
the installer will o er two types of
installation options:
Typical  only the most important
parameters will be confi gured during
installation. Other parameters will be
preset to their recommended settings.
This mode provides our recommended
comprehensive protection and is
suitable for most users.
Custom  enables confi guration
of all advanced parameters during
installation.
This guide describes typical installation.

ThreatSense.Net
ThreatSense.Net plays an important
role in our research regarding new
detection technologies that enable
us to proactively capture malware
and thus provide you with better
protection. We recommend that
you leave the ThreatSense.Net Early
Warning System enabled.
Click Continue to proceed to the next
step.
Detection of potentially
unwanted applications
Since some potentially unwanted
applications are used legitimately and
might not necessarily pose a security
risk, the user‘s consent is required to
enable detection. We recommend
selecting the Enable detection of
potentially unwanted applications
option.
Click Continue to proceed to the next
step.
Installation location
Select a disk where you want to install
ESETCybersecurity and click Continue.

Completing the installation
When all necessary parameters
have been configured, start the final
installation by clicking the Install
button. The installation progress will
be indicated by aprogress bar. After
installation is complete, you must
restart your computer. Simply click
the Restart button on the Installation
Completed screen.
Product Activation
When you restart your machine, you
will see the Product Activation Type
window.
. If you purchased a retail boxed
version of the product, it already
contains an Activation Key along with
stepbystep activation instructions.
The Activation Key is usually located
inside or on the back side of the
product package. For a successful
activation, the Activation Key must be
entered as supplied.
. If you received a Username and
Password, select the Activate using
a Username and Password option
and enter the license data in the
appropriate fields. This option is
equivalent to the Username and
Password setup... in the program
Update window.
. If you would like to evaluate ESET
Cybersecurity before making a
purchase, select the Activate Trial
License option. Fill in your name
and Email address. Your test license
will be sent to this address. ESET
Cybersecurity will be activated for a
limited period of time. Trial licenses
can only be activated once per
customer.
If you choose not to activate at
this time, click Activate later. If
you selected Activate later you can
activate ESET Cybersecurity directly
from the program by clicking the ESET
Cybersecurity icon located in your
menu bar top of the screen and then
click Product activation.
If you do not have a license and would
like to buy one, click the Purchase
License option. This will redirect you
to the website of your local ESET
distributor.

Starting
ESETCybersecurity
Check for new
version
ESETCybersecurity starts protecting
your computer immediately after
activation. At any time you may open
ESETCybersecurity to check your
protection status or to perform various
scanning and maintenance tasks.
To start ESETCybersecurity:
• Click on the ESETCybersecurity
icon located in your menu bar
top of the screen and choose
Openwindow.
For maximum protection, it is
important to use the latest build
of ESET Cybersecurity. To check for
anew version, click Update from
the main menu on the left. If a new
build is available, a message that says
“Anew version of ESET Cybersecurity
is available” will be displayed at the
bottom of the window. Click Learn
more… to display a new window
containing the version number of the
new build and the list of changes in the
new version or other important info.
Click Download to download the latest
build. Click OK to close the window and
download the upgrade later.
If you clicked Download, the fi le will
be downloaded to your downloads
folder or the default folder set by your
browser. When the fi le has fi nished
downloading, launch the fi le and
follow the installation directions.
Your username and password will
be automatically transferred to the
new installation. It is recommended
to check for upgrades regularly, and
especially after a recent installation.

Entering Username and Password for update
If you have not entered your username
and password after the installation,
you can do so directly in the program
menu.
In the left pane of the
ESETCybersecurity screen, select
Update and then click Username and
password setup… on the right.
Enter the username and password to
the appropriate fields and click OK to
confirm. The username and password
are both case sensitive. Enter them
carefully and precisely. Copying and
pasting from the license email is
recommended.
Your username and password must be
correctly entered to receive updates
and ensure that your computer is
continually protected against newly
emerging threats. You will also need
to enter the username and password
if you are renewing or reinstalling the
software.
Update
By default, ESETCybersecurity is
set to receive regular updates once
every  minutes. If you entered
your username and password after
the installation and no update has
been performed yet, we recommend
starting the update manually:
• Select Update in the left pane of the
main ESETCybersecurity screen
• Click Update virus signature
database
The update module will connect to the
Internet, contact an available ESET
update server and download digitally
signed update files, which contain the
most recent malware signatures as
well as new definitions for advanced
heuristics and other program modules.
As soon as a newer update has been
installed, ESETCybersecurity displays
the new version of the virus signature
database in the Mac OS menu bar.

Computer scanning
After successful installation and
update, we recommend that you
perform a complete computer scan
to check for existing threats. To do
this, click Computer scan in the main
ESETCybersecurity screen and select
Smart scan. ESETCybersecurity will
begin scanning all local hard drives. As
long as the scan continues, the status
window shows the progress bar as
well as the current statistics about
scanned and infected files found. Ifa
threat is detected, ESET Cybersecurity
will quarantine the file and display an
alert. You should be able to continue
working as normal while the scan
takes place.

Protection Status indication
ESET Cybersecurity’s current
protection status is indicated in the
following ways:
• The menu bar icon
• A report in the Protection status
window
In the event that any protection
module is disabled, the Protection
status window will show the name of
the disabled module, along with a link
allowing you to reenable it.
The individual protection statuses are
indicated by  colors:
green  Antivirus protection is
working properly; your computer is
protected against malicious software
and network attacks. This status
indicates that all protection modules
are enabled and the virus signature
database is uptodate.
yellow  Realtime fi le system
protection is enabled, but the
maximum level of protection is not
ensured. The yellow icon is displayed
if ESET Cybersecurity requires your
attention.
red – The Realtime fi lesystem
protection is disabled. Since the proper
functioning of these modules is vital to
your system’s security, we recommend
enabling the inactive module
immediately.