Essence Smartcare Communicator 2.0 User manual

For more information, see: https://www.essencesmartcare.com/assistance-center
Legal notice: https://www.essencesmartcare.com/privacy-notice
https://www.essencesmartcare.com • [email protected]
Wall Model
An emergency response
device with Intelligent
Voice Activation™
Communicator 2.0
Getting Started
smartcare
Wall Model
Table Model

Open the Communicator
device
Insert the batteries and
wait for the control panel
to beep
Press the Pairing button
on the Care@Home™
control panel
Close the Communicator
Installing the Communicator
1
3
2
4
Pairing
Button
Control Panel
Hold here and
pull off the
back cover
Tamper
pin
Tamper
switch

Testing the installation
WALL MODEL
Place in a convenient place,
like a living room table or
bedroom night stand.
To test, press the emergency button, or call out the trigger
phrase, or pull the cord.
To mount on a wall, remove the table mount and follow the wall
model instructions.
Clean and dry the surface
Peel the strips off the
mounting tape and press the
Communicator into place
TABLE MODEL
1
1
2

© 2021 All rights reserved to Essence SmartCare Ltd.
For more information, see: https://www.essencesmartcare.com/assistance-center
Legal notice: https://www.essencesmartcare.com/privacy-notice
https://www.essencesmartcare.com • [email protected]
LED
Speaker
Emergency button
Pull cord
Microphone
Wall Model
Table Model
ESUG05212 Rev. 1.1
smartcare
Call out the
trigger phrase
Press
Emergency Call
Pull the cord,
if included
In an emergency
SOS
OR OR