ESTELLE ESSLBLKRMVA User manual

VISIBLE SILICONE
BLACKHEAD REMOVER
ESSLBLKRMVA

• Do not use the device if the suction nozzle is not installed.
• This product is charged using a DC 5V adapter. When charging, the battery
indicator will be RED. When it fully charged the indicator will turn GREEN.
• When the battery is low, the battery indicator will flash RED 10 times and then
power down. Please charge the product.
• Do not use alcohol, detergents containing mercury, alkaline, acid and other
supplies to clean the device.
• Not recommended for use whilst pregnant.
• Not recommended for use on children.
• Do not use if you have a cut on your skin.
• Do not wash the device, it is not waterproof. The suction nozzle can be
disassembled and independently cleaned and disinfected.
• Do not drop the device, as the air-tight structure may be damaged causing it to
malfunction.
• The area being treated should be kept clean and dry when using the blackhead
remover. The suction nozzle should be cleaned after every use.
• Use the device only according to the instructions in this user guide.
• The following situations may result in voiding the warranty:
- Damage because of incorrect usage.
- Damage because of incorrect disassembly or repairing.
- Damage due to accidental dropping.
- Damage due to fire, water, electric shock, other weather factors.
SAFETY & WARNINGS

OVERVIEW
Suction
nozzle
Battery indicator
Mid-speed
indicator
Power button
High-speed
indicator
Low-speed
indicator
Light
Lens
Charging
port
Large suction
nozzle
Small suction
nozzle
Oval suction
nozzle

Changing the suction nozzles
• Removal:hold the device with one hand, press the suction nozzle with the other
hand and pull it out. (Figure 1).
• Installation: hold the device with one hand, push the suction nozzle with the other
hand into position, until it is securely in place. (Figure 2).
Changing suction levels
1. Press and hold the Power button for 1 second to turn the device on. The low-speed
indicator will turn BLUE and the light will turn on.
2. Pressing the Power button again will increase the suction. The mid-speed indicator
will turn BLUE.
3. Pressing the Power button a third time will increase the suction. The high-speed
indicator will turn BLUE.
4. Pressing the Power button again will lower the suction. The low-speed indicator will
turn BLUE.
5. Press and hold the Power button for 1 second to switch the device off.
Light
• With the device turned on, press the Power button twice. The supplementary light
will turn off.
• To t u r n t h e l i g h t b a c k o n , p re s s t h e Power button twice.
OPERATION
Figure 1
Figure 2

Removing blackheads
1. Apply a hot towel to your face for 1 - 2 minutes to help open the pores.
2. Place a cotton pad into some blackhead extraction solution, then apply the cotton
pad to the nose and leave for 6 - 8 minutes (this step is optional).
3. Tu r n o n t h e b l a c k h e a d re m o ve r, face a mirror to help observe the blackheads. Place
the suction nozzle on the blackhead and allow the device to remove the blackhead
from the pore.
4. Using a pore minimising product after treatment can help in the reduction of
blackheads returning.
5. The device will automatically shut down after 5 minutes of use.
Note:
Keep the device moving back and forth during use. It is not recommended to
keep it in the same place for too long.

Charging voltage
DC 5V
Maximum power
<2.5W
Use time
60 – 120mins
Product size
171 x 48 x 43.7mm
Working voltage
DC 3.7V
Charging time
120mins
Net weight
117g
SPECIFICATIONS

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com