Etac Tactical Gear K9 User manual

E-Tac Collar Assembly Guide | K9 Tactical Gear
1
Thank you for choosing K9 Tactical Gear for your E-Tac Collar. Please follow the steps below for proper assembly:
1. Remove E-Tac Cover from Collar. Place aside for now, as you will need to re-apply in a later step.
2. Undo One-Wrap Velcro, leave the Velcro strips loose and positioned apart.

E-Tac Collar Assembly Guide | K9 Tactical Gear
2
3. Unscrew/Remove E-Collar contact points from your receiver. Do not force the threaded studs through the
pre-fabricated holes with prongs still attached as this will damage the collar and void your product
warranty.
4. Place E-Collar on the outside face of the collar and align the threaded studs with the pre-fabricated holes.

E-Tac Collar Assembly Guide | K9 Tactical Gear
3
5. Feed One-Wrap Velcro strips through guides on the receiver. Join the strips together with to secure the
receiver.

E-Tac Collar Assembly Guide | K9 Tactical Gear
4
6. Screw the contact points back onto the receiver from the inside of the collar.

E-Tac Collar Assembly Guide | K9 Tactical Gear
5
7. Begin applying the cover by aligning loop Velcro end closest to the V-Ring attachment. Work your way
towards the receiver, firmly pressing down Velcro around all edges of receiver. Continue until entire cover is
secured to Collar.