Petdwell ON2PETS Canopies User manual

Grab perch (C1)
or (C2), place it
on your lap with
the leaves facing
down.
STEP
1
1A
Insert L-brackets
into the guided slots
under each perch
until flush. Do this
for both perches
(C1) and (C2)
1B
STEP2
2A
2B
Screw in (B1) into the
thinner portion of the
L-bracket into the perch
(C1). Repeat step for
perch (C2).
Screw in (B2) into the
thicker portion of the
L-bracket into the
perch (C1). Repeat
step for perch (C2).
3
STEP
Please locate the studs on the wall where you want to place
your perch. Use a level on the flat portion of the shelf to align it
straight.
NOTE: L-brakets are 16” apart to ensure correct instalation
into the wall studs. If screws are not aligned into the wall studs
it might not support the weight of your feline.
3A
3B
After you locate the studs,
insert the bolts (B3) into
the L-brackets and screw
them into the wall.
Repeat this step with
perch (C2).

Thanks for choosing On2Pets.
Your suggestions and satisfaction are important to us. If you are
satisfied with our product, could you share a positive review? If
there are any defects or any problems concerning our products
please feel free to contact us at www.on2pets.com/contact. We will
arrange the necessary solutions for your complete satisfaction.
Tag us to be featured at @on2pets for Instagram and On2Pets for
Facebook.
Please be reminded:
• Product not intended for the use of children
• Be aware some components may be swallowed. If such event occur, stop the use
of the product immediately and check or return and warranty policies.

Canopies

PARTS
Scew 5/8” (X4) Screw 1” (X4) Bolts 1 - 3/4” (X8)
Perch Small (X1)
Perch Large (X1)
L - Brackets (X4)
ASSEMBLY INSTRUCTIONS
Before you begin installation please read
the following:
- Assemble at your own risk. On2Pets shall not be held liable
for injury or damages to wall due to incorrect installation.
-Installation may require two people.
-Holes are 16” apart. Installation should only be into the wall
studs. We do not recommend using plastic anchors.
-This product is desinged for cats up to 32 pounds in weight.