ete T-701C User manual

T-701C
T-08C
T-09C
T-09C
T-08C
T-06C
T-06C

9
12
7
5
10
Thanks for buying our products video door phone.This is a villa
type video door phone. One system includes indoor unit(s) and
outoor unit(s),has ring,monitor,intercom,unlock function,Memory
funtion is an additional function for the system.Our video door
phone will make your life more comfortable and safer.
These instructions are for your safety and comvenience.
Please read the following instructions throughly before using
and retain for future reference.
Bracket

T-701C
2.Outdoor Unit（T-08C/T-09C)
T-08C T-09C
2.Outdoor camera (optional)
1.Indoor monitor
3.1 piece of 10-
meter cable
III、Functions
T-8108C
T-01C T-03C T-06C
T-03C T-01C T-06C
1.Outdoor Unit（T-06C)
T-09CT-08CT-06C
L- L+
(output flash flat)
The owner ’s voice can
be heared from here

3、 （T-701C)Back View
(output flash flat)
press again for hang up.
Press monitor button at stand-by status, can view outdoor situation.
the colorful light twinkles. Press intercom button to talk.After communication,
press intercom button again, the image on screen will turn off and be back to
standby status after 180 seconds.
Meanwhile,
Monitor Operation
Front View
2.Indoor Unit(T-701C)
Intercom button/
hang up button
Top View
+
-L+L-
75Ω开关
+
-L+L-
1.
2.Audio
3.Ground
4.Video
Power
T-701C
Speaker:
Sound rings and voice
from outdoor camera

When indoor monitor at working status (it is, the screen being on),
selection button, the melody music will sound. And there're different ringtype
after. pressing, then choose your favorite one.
press rings
Turn on the screen, then repeated pressing monitor button to see the
saved photos. To view the prior photo, please press the monitor button
continuously.
View the saved pictures (Only for the recording function models)*

T-701C
DC15V
220×115.5×21mm
T-08C T-09C
9 4×155×34mm 97×181×30mm
2.82.8
Power Supply:
Camera Tube:
Resolution:
Ring type:
Power Consumption:
Size:
7"LCD Standby:130mW Working:14W
Pnsh down
1.Installation instruction for outdoor unit T-08C
1.Take out the screws fixed in the surface shell.(Pic.1)
2.Put bottom shell on rain cover, use screws to fix them both
on the wall, then make the wire pass through the hole in the
bottom shell.(Pic.2)
3.Connect the outdoor and indoor unit well, pull down surface
shell on the bottom shell, then press it to fix them well.(Pic.3)
4.Use screws to fix them again.(Pic.4)
2.Installation instruction for outdoor unit T-09C
1.Take out the screws fixed in the surface shell.(Pic 1)
2.Fix rain cover onto the wall by screws; make wire pass through the hole in the
bottom shell.(Pic. 2)
3.Connect with the outdoor unit well, and install the surface shell to the bottom
shell, then fix them by screws.(Pic. 3)
Pic 1 Pic 2 Pic 3
Pic 1 Pic 2 Pic 3
Pic 4
T-701C
T-06C
9 4×134×45mm
2.8
3.用镙丝将挂钩与室内机锁上。

10 11
芯
Power Plug
DC15V
Power Plug
DC15V
将每一台室内机的背面的连接电控锁插座与电控锁相连接即可。
注：若用门口机接电锁，则室内机不用接电锁线。
+
-L+L-
DC15CV
Power Plug
DC15CV
Power Plug
DC15CV
Power Plug
Power Plug
DC15V
Power Plug
DC15V
Power Plug
DC15V

output flash flat
12
+
-L+L-
1234