Fermax Citymax Universal User manual

Fermax Citymax Universal
Terminals
1 Lock
2 Speech Out (Mic)
3 Common
6 Speech In (Speaker)
4 Call
Note : Jumpers must be set correctly
otherwise call tone may not work and you
may only get speech 1 way (see instructions
below)
IMPORTANT NOTE :
1) Before replacing the handset make note of the wires to each terminal on the existing unit (an easy way
is to cut each core off leaving a piece of the insulation in place with colour visible) twist unused cores
together (so you know they are not used, do not short them out).
2) Some older systems will have cable with one coloured core and a solid white core in this case mark
each core with a marker or tape.
3) Some systems may have loop on wiring, you will have 2 cables into your handset (make
sure any joins
remain, as these may be serving other flats on the system).
© 2010 www.intercomsrus.com

Fermax Universal Compatibility Chart

Instructions modified by Intercoms R us Ltd

Wiring Diagram
1 Way Basic Audio

Wiring Diagram
5 Wire Audio System

Wiring Diagram
5 Wire Audio with 2 Entrances