ETEKCITY BH9938U-5-2 User manual

Zap 5LX-S
Model No.: BH9938U-5-2
Questions or Concerns?
[phone]
[e-mail]

Thank You.
Thank you for purchasing the Zap 5LX-S Remote Outlet Switch by Etekcity. We
are dedicated to providing our customers with quality products for building a
better living. Should you have any questions or concerns about using your new
product, feel free to reach out to our helpful customer support team at
[phone] or by email at [e-mail].
We hope you enjoy your new product!

Table of Contents
Safety Information 4
Function Diagram 6
Operation 8
Re-programming an Outlet 10
Resetting an Outlet 12
Specifications 14
Troubleshooting 15
Warranty 16
Customer Support 19

Safety Information
IMPORTANT: Please read, understand, and comply with all of the instructions
provided in this manual before using this device. Failure to comply with the
instructions given in this manual and/or using the device in ways other than
the ones mentioned herein may result in physical harm and/or damage to the
device.
Important Safety Information
• The wireless range may be shortened by other electronic devices,
appliances, walls, and other physical barriers.
• The outlets are intended for indoor use only.
• Avoid exposing to high-temperature sources, direct sunlight, or exposure to
moisture.
• DO NOT exceed the maximum load current of 10A (approximately 1200W).
4

•DO NOT use appliances such as refrigerators, air conditioning units, and
washing machines with the outlets. Such appliances exceed the maximum
load current of 10A (1200W).
•Keep out of reach of children.
•The outlets are best used in areas with proper air circulation.
•When cleaning, use a dry cleaning cloth to wipe the outlet and remote
surfaces.
•For your safety, make sure the batteries within the remotes are correctly
installed before use.
•DO NOT dispose any part of this product in a fire.
•The remote is not compatible with rechargeable batteries.
•This device is not intended for use in areas with high humidity, such as
bathrooms.
•For best performance, regularly change the batteries in the remote controls.
•If the remote is not in use for an extended period of time, remove batteries.
•Discard all parts of this products in accordance with local environmental
regulations. Do not dispose in regular household waste.
•These outlets are not compatible with the ZAP 3VX remote outlets.
5

Function Diagram
1. Outlet
2. Power / Program Button
3. Outlet Indicator Light
4. Remote Control
5. On Buttons
6. Off Buttons
7. Outlet Number
4
5 6
6

1
2
3
7
7

Operation
The outlets are pre-programmed
for immediate use, but the
configuration can be customized to
meet your needs.
1. Install one 12V/23A battery to
each remote control.
2. Plug each outlet into a
powered socket.
8

3. Plug an appliance into each
outlet. Keep the appliance
switch to ‘ON’ in order to
allow the outlet to control the
device.
4. Press the ‘ON’ or ‘OFF’ button
for the corresponding number
on remote. The indicator light
on the corresponding outlet
will turn on, confirming that
the outlet is now in use.
9
NOTE: The outlet number can be
found on the back of each outlet
in the following format from 1 to 5:
xxxx-1, xxxx-2, etc.
ON
4
5
OFF

Re-programming an Outlet
1. Unplug device from outlet.
2. Press and hold programming
button until indicator light
starts to blink.
Program
Button
10

3. Release program button, press
the "ON" or "OFF" button for the
desired number on the remote
4. Pairing is successful when
indicator light stops blinking.
NOTE: You may repeat the
re-programming steps to assign
up to 10 outlets to a single number
to simultaneously control multiple
devices with a single click.
11
ON
4
5
OFF

Resetting an Outlet
To remove an outlet from all remote
control pairings:
1. Unplug any devices connected
to the remote outlet.
2. Remove the outlet from the
power socket.
12

6. Program reset will be
complete when the indicator
light stops blinking.
Hold the program button for
approximately 5 seconds
until the LED indicator
begins to flash
5.3. Press and hold the program
button.
4. Plug outlet back into power
socket while continuing to
hold program button.
13
Program
Button

Specifications
Voltage: 120V ~ 60 Hz
Maximum Current: 10A
Maximum Power: 1200W
Transmission Frequency: 433.92 MHz
Remote Battery Power: 12V (23A)
Remote Control Range: 100 feet (30 meters)*
Operating Temperature: 32°~95°F (0°~35°C)
Storage Temperature: -4°~167°F (-4°~75°C)
Package Contents
5 x Remote Outlet Switch
2 x Remote Control
2 x 12V/23A Batteries
1 x User Manual
*NOTE: The wireless range may
be shortened by other electronic
devices, appliances, walls, and other
physical barriers.
14

Troubleshooting
Issue Solution
Outlet is
unresponsive
to remote
commands.
Replace the remote batteries with new 12V 23A batteries. Low
battery power may decrease readable wireless remote range.
Make sure the outlet and device are properly connected
and powered on.
Make sure that the outlet is placed in an area with proper
air circulation without overheating.
Make sure the maximum load current of 10A (approximately
1200W) isn’t being exceeded. If so, unplug the device from
the outlet immediately.
If the outlet is still unresponsive, refer to the “Resetting” and
“Reprogramming” sections in the manual.
15

Warranty
TERMS & POLICY
Etekcity warrants all products to be
of the highest quality in material,
craftsmanship and service for a
minimum of 1 year, effective from the
date of purchase. Warranty lengths
may vary between product categories.
For specific warranty terms, please
refer to your product’s listing page or
operation manual.
Under the limited warranty,
Etekcity will replace or refund any
product found to be defective due
to manufacturer flaws based on
eligibility. This warranty extends only
to personal use and does not extend
to any product that has been used
for commercial use, rental use, or any
other use in which the product is not
intended for. There are no warranties
other than the warranties expressly set
forth with each product.
This warranty is non-transferrable.
Etekcity is not responsible in any
way for any damages, losses or
inconveniences caused by equipment
failure or by user negligence, abuse,
or use noncompliant with the user
manual or any additional safety, use,
or warnings included in the product
packaging and manual.
16

Etekcity and its subsidiaries assume
no liability for damage caused by the
use of the product other than for its
intended use or as instructed above
and in the user manual. Some states
do not allow this exclusion or limitation
of incidental or consequential losses
so the foregoing disclaimer may not
apply to you. This warranty gives you
specific legal rights and you may also
have other rights which may vary from
state to state.
ALL EXPRESS AND IMPLIED
WARRANTIES, INCLUDING THE
WARRANTY OF MERCHANTABILITY,
ARE LIMITED TO THE PERIOD OF THE
LIMITED WARRANTY.
Should your product prove defective
within the specified warranty period,
please return the defective unit in its
original packaging with (1) an original
copy of the invoice, (2) your order
confirmation number, (3) and your
warranty ID number.
EXCEPTIONS AND EXCLUSIONS
• Damage due to abuse, accident,
alteration, misuse, tampering or
vandalism.
• Improper or inadequate
maintenance.
• Damage in return transit.
• Unsupervised use by children under
18 years of age.
17

To receive a valid warranty ID number, sign into your Etekcity customer
account at www.etekcity.com (If you ordered your product through Amazon,
Ebay or Walmart, create an account at www.etekcity.com in order to retrieve
your warranty ID). At the top of the warranty page, type in your order number
located in your order invoice to retrieve your warranty ID number. Your
warranty ID number will then be sent to your email for your records. If deemed
defective, your product will be replaced or refunded at no charge to you.
Date of Purchase: ____________________
Place of Purchase: ____________________
Order Number: ____________________
Warranty ID: ____________________
18

Customer Support
Should you encounter any issues or have any questions regarding your
new product, feel free to contact our helpful Customer Support Team. Your
satisfaction is ours!
CUSTOMER SUPPORT
Etekcity Corporation
1202 N Miller St. Suite A
Anaheim, CA 92806
Toll-Free: [phone]
Fax: [phone]
Local: [phone]
Email: [e-mail]
SUPPORT HOURS
Monday - Friday: 9:00 am - 5:00
pm PST
*Please have your order
confirmation number ready before
contacting customer support.
19

Scan here and join the community!
http://www.etekcity.com