ETEKCITY ESW01-EU User manual

1
Questions or Concerns? [e-mail]
Voltson Smart WiFi Outlet
Model No.: ESW01-EU
EN English

2
Table of Contents
Safety Information
Function Diagram
LED Indicator Overview
Setup
Conguration
APN Mode
Operation
· Turning Devices On/Off
· Energy Consumption Data
· Creating Schedules
· Using Sunrise & Sunset Scheduling
· Set Timer
· Away Mode
· Device Setting
· Share Device
· Energy Saving Mode
· Power Protection
· Reconguring a Device
· Link to Alexa
· Link to Google Home
· Delete a Device
· Log Out
· Using the Vesync Widget
Specications
Troubleshooting
Warranty Information
3
4
5
6
7
10
13
13
15
16
18
23
25
27
28
30
31
32
36
37
38
39
40
42
43
44
EN

EN
3
Safety Information
• Do not exceed the maximum load current of
10A (approximately 2300W). Always check the
electrical power before use to avoid potential
damage to the device.
• Do not use for or near space heaters or air
conditioning units.
• Keep out of reach of children.
• The outlet is for indoor use only. Avoid exposure
to high-temperature sources, direct sunlight,
and moisture. The outlet is best used in areas
with good air circulation.
• To avoid short circuiting, keep the outlet out of
direct/indirect contact with water and liquids.
• Do not install the outlet in washrooms,
restrooms, and any other damp environments.
• When cleaning, use a dry cloth to wipe the
outlet’s surface.
• The VeSync home automation app is only
compatible with Android 4.3 / iOS 8.0 operating
systems and above.
• The VeSync app does not support every phone/
tablet. Only use Android 4.3 / iOS 8.0 or above.
• The outlet does not support 2G/3G/4G networks
for conguration.
• Before conguration, make sure the wireless
network is operating normally in order to avoid
adverse effects on the product operation.
IMPORTANT: Please read, understand, and comply with all of the instructions provided in this manual before
using the device. Failure to comply with the instructions given in this manual and/or using the device in ways
other than the ones mentioned in this manual may result in serious injury and/or damage to the product.

EN
4
Function Diagram
1. Power Button
2. LED Indicator
1
2
Front Back

EN
5
LED Indicator Overview
Indicator Colour Action Description
Yellow Solid yellow Outlet is turned on
Off Outlet is turned off
Blue Off Outlet is not congured or congured
Blinks 1 time per second Outlet is in Smart Conguration Mode
Blinks 2 times per second Outlet is in APN Conguration Mode
Blinks 4 times per
second,then off
Outlet is being factory reset
Blinks 2 times per 5
seconds
Outlet is not connected to WiFi
Blinks 1 time per 5
seconds
Outlet has successfully connected to WiFi, but the
wireless router was unable to access the Internet

EN
6
Setup
1. Scan the QR code or download the VeSync App
from the App Store or Google Play Store.
iOS Android
2. Open the VeSync App and tap Sign Up to create
a new account. Enter a new email and password,
then tap Log In.
Note: It is recommended create an account so that
you can connect to Amazon Echo or Google Home
for voice control. You can also share the outlet with
your friends and family to control.
NOTE: For Android users, you must select
Allow to use VeSync.

EN
7
Conguration
1. Tap the +button to add your device. 2. Select Wi-Fi Outlet.

EN
8
Note: Refer to LED Indicator Overview on page 5 if
the blue LED do not slow blink.
3. Select the ESW01-EU model. 4. Plug your smart outlet into a powered electrical
outlet or power strip. Press and hold the power
button for 5 seconds until the blue LED light
starts to slow blink.

EN
9
5. Type in the name of your home WiFi network
and password, then tap Join Network.
6. The system will take a moment to connect.
Note: This smart outlet conguration requires a
2.4GHz WiFi network.

EN
10
7. You have successfully set up your smart outlet.
Give it a unique name, or simply tap OK to use
the default name.
Note: You can change the device name and picture
at any time in Device Settings.
APN Mode
If setup fails, you can use APN Mode to congure
your WiFi outlet.
1. Tap Use APN Mode.

EN
11
3. Enter your home WiFi network name and
password to start setup.
2. Press and hold the power button for 10 seconds
until the blue LED light starts to blink rapidly.

EN
12
4. Open settings on your mobile device, and
select the WiFi network that begins “VeSync”
(Settings -> WiFi).
5. The system will take a moment to connect.

EN
13
6. You have successfully set up your smart outlet.
Give it a unique name, or simply tap OK to use
the default name.
Operation
Turning Devices On/Off
Method 1
Your connected devices will appear on the My Home
Screen under Devices. Tap to turn on or turn
off the outlet.

EN
14
Note: Although controls the ow of power to
the smart outlet, the smart outlet itself will remain
connected to the internet.
Device is Off
Device is On
Method 2
While on the My Home screen, tap on the name of
the device. You will now see the detailed view page
for the device. Tap on the detailed view to turn
the device on.
Off On

EN
15
Energy Consumption Data
The VeSync app gathers information from the outlet
and will automatically calculate your energy usage.
1. Tap the >on the right side of the screen while on
the detailed view page for your device.
2. Tap W, M, Yto see weekly, monthly, and yearly
energy consumption, respectively. Tapping
allows you to view the energy consumption over
a custom time period.

EN
16
3. To select a custom time period, tap the desired
dates to dene a start and end time. The app will
display the data.
Creating Schedules
1. Tap Create Schedule to create a scheduled time
for the device to turn on/off.

EN
17
2. Set your scheduled start time. You can also set
an end time or leave it blank. Tap √when you
are done.
3. You can turn on or off a schedule at any time on
the detailed view page.
Note: This smart outlet supports up to 26 groups of
schedules, timers, and away modes.

EN
18
Using Sunrise &
Sunset Scheduling
You can schedule the outlet to turn on or off at
sunrise or sunset based on your location.
1. Make sure your Location or Location Services
has been turned on for VeSync.
2. Tap Create Schedule to create a scheduled time
for the device to turn on/off.

EN
19
3. Select the Start or End time to set the time for
sunrise or sunset.

EN
20
4. When the time selection comes onto the
screen, tap on the left or right arrows to select
“Sunrise”or “Sunset”.