ETEKCITY EAB-83 User manual

Questions or Concerns?
[e-mail] • [phone]
Quattro Ionic Hair Dryer
and Volumizer Brush
Model: EAB-83
User Manual
HIGH LOW COOL OFF

2
Table of Contents
Package Contents
Specifications
Features
Safety Information
Function diagram
Using Your Volumizer
• Controls
• Styling Tips
• Overheat Protection
Care & Maintenance
• Storage
Troubleshooting
Warranty Information
Customer Support
2
3
3
4
8
9
9
10
10
11
11
12
12
14
Package Contents
x Quattro Ionic Hair Dryer and Volumizer Brush
x Styling Clips
x User Manual
x Quick Start Guide
1
2
1
1

3
•DC Motor for long-lasting power
•Air outlets for reduced heat damage
• Cool tip for comfortable styling with reduced risk of burns
• Quattro Ionic feature for faster drying and reduced
frizz and static
•Multi-functional drying, curling, straightening
and brushing
Specifications
Features
Power Supply
AC 120V, 60Hz
Note: For connection to a
220–240V supply, use an
attachment plug adapter with
the proper configuration for the
power supply receptacle.
Rated Power 1100W
Storage Temperature 32°–95°F / 0°–35°C
Dimensions 16.3 x 4.7 x 3.7 in /
41.5 x 12 x 9.5 cm
Weight 1.26 lb / 570 g

4
Safety Information
When using electrical appliances, especially when children
are present, basic safety precautions should always be
followed, including the following.
These operating instructions should be carefully observed
and kept in a safe place to prevent damage to and danger
from the volumizer caused by misuse. When giving the
volumizer to someone else, also give them the operating
instructions.
DANGER – As with most electrical appliances, electrical
parts carry current even when the switch is off.
WARNING– To reduce the risk of burns, electrocution, fire,
or injury to persons:
• To reduce the risk of death by electric shock:
- Always turn off and unplug immediately after using.
- Do not use while bathing.
- Do not use in the shower, over a sink filled with water,
or with wet hands.
- Do not place or store volumizer where it can fall or be
pulled into a tub or sink.
- Do not place in or drop into water or other liquids.
- If the volumizer falls into water, unplug it immediately.
Do not reach into the water.
• Do not use the volumizer near bathtubs, showers,
basins or other vessels containing water.
• The volumizer should never be left unattended when
plugged in.
READ ALL INSTRUCTIONS BEFORE USING
KEEP AWAY FROM WATER
SAVE THESE
INSTRUCTIONS

5
• Close supervision is necessary when the volumizer is
used by, on, or near children or individuals with certain
disabilities.
• Children should be supervised to ensure they do not
play with the volumizer.
• Use the volumizer only for its intended use as
described in this manual. Do not use attachments not
recommended by Etekcity.
• Never use this volumizer if it has a damaged cord
or plug, if it is not working properly, or if it has been
damaged or partly/fully immersed in water.
• Keep the cord away from heated surfaces, including hot
parts of the volumizer.
• wrap the cord around the volumizer.
• Do not
Do not
use the volumizer with a twisted, bent, or
otherwise damaged cord.
• Never block the openings of the volumizer or place it
on a soft surface, such as a bed or couch, where the
openings may be blocked. Keep the openings free of
lint, hair, etc.
• Never use while sleeping.
• Never drop or insert any object into any opening.
• Do not use outdoors or operate where aerosol (spray)
products are being used or where oxygen is being
administered.
• Do not use the volumizer if there is visible damage, it is
not working properly, or if it has been dropped.
• Regularly check the volumizer and its cord for damage.
If the volumizer or its cord needs examination or repair,
or if the power supply is abnormal (i.e. the volumizer is
not turning on), contact
Customer Support (see page
14). Do not repair on your own. Repairs that are not
performed by experts can be extremely dangerous.
• The cord cannot be repaired. The volumizer must be
discarded if the cord is damaged.
• Grab the cord by the plug when unplugging.
Never pull
on the cord itself.
Safety Information (Cont.)

6
• Do not use an extension cord with the volumizer.
• Do not direct hot air toward eyes or other heat-
sensitive areas.
• Attachments may be hot during use. Allow them to cool
before handling.
• Allow the volumizer to cool before storing or cleaning.
• Do not place the volumizer on any surface while it is
operating.
• While using the volumizer, keep your hair away from the
air inlets.
• Do not cover the air outlet or air inlet holes during use.
• Do not use with a voltage converter.
• The volumizer must be stored in a dry place at
temperatures between 32°–95°F / 0°–35°C.
• Do not expose the volumizer to heat (radiator, oven,
etc.), direct sunlight, or humidity.
• Keep the volumizer clean and do not use abrasives or
products containing solvents on the volumizer.
• Do not use this volumizer to dry or brush a wig made of
something that may burn easily.
• Do not use this volumizer to dry or brush a wig that has
been cleaned in something that may burn if it may still
have some of the cleaner on or in it.
• If not operating the volumizer for an extended time,
switch it off.
• This volumizer has a polarized plug (one blade is wider
than the other). As a safety feature, this plug will fit in
a polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does
not fit, contact Customer Support(see page14) or
a qualified electrician. Do not attempt to bypass this
safety feature.
• For additional protection, the installation of a residual
current device (RCD) having a rated residual operating
current not exceeding 30 mA is advisable in the
electrical circuit supplying the bathroom. Ask your
electrician for advice.
• Household use only.
Safety Information (Cont.)

7
• In the event of immersion, the built-in protective device
on the plug will not allow the volumizer to operate.
• Periodically check the safety plug to verify that it is in
proper working order.
• Place the plug into the outlet and press the TEST
(yellow) button. The volumizer should immediately stop.
• If the TEST button does not work properly, contact
Customer Support (see page 14).
• To resume operation, unplug the volumizer, press the
RESET button, and plug it back in.
Safety Information (Cont.)
This volumizer is equipped with a thermostat that may
cycle off if the temperature exceeds comfort levels due to
the partially blocked air inlet or air outlet openings. In the
event that the volumizer slows down during use, turn off
the switches and allow the volumizer to cool down, at which
time the thermostat will automatically reset.
In a double-insulated appliance, two systems of insulation
are provided instead of grounding. No grounding means
is provided on a double-insulated appliance, nor should a
means for grounding be added to the appliance. Servicing
a double-insulated appliance requires extreme care and
knowledge of the system, and should be done only by
qualified service personnel. Replacement parts for a
double-insulated appliance must be identical to the parts
they replace. A double-insulated appliance is marked
with the words “DOUBLE INSULATION” or “DOUBLE
INSULATED.” The symbol ( ) may also be marked on
the appliance.
SERVICING OF DOUBLE-INSULATED
APPLIANCES
Safety Plug
Reset (Red Button)
Test (Yellow Button)

8
HIGH LOW COOL OFF
Function Diagram
A. Air Outlets
B. Cool Tip
C. Combination Bristles
D. Temperature/Power Switch
E. Air Inlets
F. Swiveling Cord Port
B
D
E
A
C
F

9
Using Your Volumizer
IMPORTANT: THIS IS A HIGH TEMPERATURE
PRODUCT
Controls
Rotate the switch to change the volumizer setting.
• Low Temperature: Switch to LOW to dry thin or fine hair.
• High Temperature: Switch to HIGH to dry thick or
coarse hair.
• Cool Air: Switch to COOL to use cool air.
• Off: Switch to OFF to turn volumizer off.
1. Wash your hair and dry it with a towel. Make sure your
hands are dry before plugging in the volumizer.
2. Plug the volumizer in and switch it to one of the
temperatures to turn it on.
3. Follow the Styling Tips (see page 10) to style your hair.
4. When you are finished, switch the volumizer to OFF
before unplugging it.
Note: We recommend LOW for fine or thin hair, HIGH for
thick or coarse hair, and COOL for locking in a hairstyle.
HIGH LOW COOL OFF

10
Using Your Volumizer (Cont.)
• For the best results, thoroughly brush hair before use.
• You can use the volumizer to brush and dry your hair at
the same time.
• Separate hair into manageable sections while drying.
• For smooth blowouts, place the volumizer close to the
roots and brush downward toward the ends of your hair.
• For voluminous blowouts, place the volumizer under the
hair close to the roots and roll it outwards toward the
ends of your hair.
• For an extra lift at the roots, hold the volumizer for 2 to
3 seconds underneath the roots of your hair.
• To curl the ends of your hair inward, place the volumizer
under the ends of your hair and hold for 2 to 3 seconds
before rotating inward.
• To curl the ends of your hair outward, place the
volumizer over the ends of your hair and hold for 2 to 3
seconds before rotating outward.
• If the volumizer overheats due to partially blocked air
inlets or air outlets, it will automatically turn off.
• Unplug the volumizer and allow it to cool for 10–20
minutes before using it again.
Styling Tips
Overheat Protection

11
Care & Maintenance
Storage
This volumizer does not typically require maintenance.
Keep all vents and openings clear of dirt and dust. If the
cord becomes twisted, untwist prior to use.
If cleaning is necessary, unplug the volumizer and allow
it to completely cool. Wipe the outside with a damp cloth.
Dust and lint can be removed from air inlets and air outlets
using a small brush or a vacuum cleaner brush attachment.
Do not submerge the volumizer in water, allow the
volumizer to come in contact with water, or allow moisture
or debris to enter the volumizer while cleaning.
If the volumizer is malfunctioning, unplug it, allow it to cool,
and contact Customer Support (see page 14). Do not try to
repair it yourself.
Allow the volumizer to cool, then store it out of reach of
children in a safe, dry location. Do not jerk or strain cord or
store with tight bends or folds in the cord.
CAUTION: Never allow the power supply cord to be pulled
or twisted. Only pull the cord from an outlet by the plug.
Never wrap the cord around the volumizer. Do not put too
much tension on the area where the cord connects to the
volumizer. This may cause damage, causing it to rupture
and short circuit. Inspect the cord frequently for damage.
Stop using immediately if damage is visible or if the
volumizer stops unexpectedly or works intermittently.
Note: When using this volumizer near water (such as in
bathrooms), we recommend using an electrical outlet
protected by a Ground Fault Circuit Interrupter.

12
Troubleshooting
Problem Possible Solution
The volumizer
will not turn on.
Make sure the volumizer is
plugged in.
The volumizer
suddenly stops
working.
Overheat protection has been
activated. Unplug the device
and wait 10–20 minutes before
turning the volumizer back on. The
volumizer should work normally.
If your problem is not listed, please contact Customer
Support (see page 14).
Warranty Information
Terms & Policy
Etekcity warrants this product to the original purchaser to be
free from defects in material and workmanship, under normal use
and conditions, for a period of one year from the date of original
purchase.
Etekcity agrees, at our option during the warranty period, to repair
any defect in material or workmanship or furnish an equal product
in exchange without charge, subject to verification of the defect or
malfunction and proof of the date of purchase.
There is no other express warranty.
This warranty does not apply:
• If the product has been modified from its original condition;
• If the product has not been used in accordance with
directions and instructions in the user manual;
Product Name Quattro Ionic Hair Dryer and
Volumizer Brush
Model EAB-83
For your own reference, we strongly recommend that you record
your order ID and date of purchase.
Order ID
Date of Purchase

13
• To damages or defects caused by accident, abuse, misuse or
improper or inadequate maintenance;
• To damages or defects caused by service or repair of the
product performed by an unauthorized service provider or by
anyone other than Etekcity;
• To damages or defects occurring during commercial use,
rental use, or any use for which the product is not intended;
• To damages or defects exceeding the cost of the product.
Etekcity will not be liable for indirect, incidental, or consequential
damages in connection with the use of the product covered by this
warranty.
This warranty extends only to the original consumer purchaser of
the product and is not transferable to any subsequent owner of the
product regardless of whether the product is transferred during
the specified term of the warranty.
This warranty does not extend to products purchased from
unauthorized sellers. Etekcity’s warranty extends only to products
purchased from authorized sellers that are subject to Etekcity’s
quality controls and have agreed to follow its quality controls.
ALL IMPLIED WARRANTIES ARE LIMITED TO THE PERIOD OF
THIS LIMITED WARRANTY.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state. Some states do
not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.
If you discover that your product is defective within the specified
warranty period, please contact Customer Support via
[e-mail]. DO NOT dispose of your product before
contacting us. Once our Customer Support Team has approved
your request, please return the product with a copy of the invoice
and order ID.
Warranty Information (Cont.)
Extend Your Warranty by 1 Year
Register your product within 14 days of purchase at
www.etekcity.com/warranty to extend your 1-year warranty by an
additional year.
This warranty is made by:
Etekcity Corporation
1202 N. Miller St. Suite A
Anaheim, CA 93806

14
Customer Support
If you encounter any issues or have any questions about
your new product, please contact our helpful Customer
Support Team.
Distributed by Etekcity
1202 N. Miller St., Suite A
Anaheim, CA 92806
Email: [e-mail]
Toll-Free: [phone]
Support Hours
Monday—Friday
9:00 am—5:00 pm PST/PDT
*Please have your invoice and order ID ready before
contacting Customer Support.
14

15
Connect with us @Etekcity

Building on better living.
A0-01.01_S_20I24