ETEKCITY EAM DT1 User manual

Questions or Concerns? [phone] • [e-mail]
Air Mattress
Model No.: EAM-DQ1 & EAM DT1

Thank You.
Thank you for purchasing the EAM-DQ1/EAM-DT1 Air
Mattress by Etekcity. We are dedicated to providing
our customers with quality products for building
a better living. Should you have any questions or
concerns about using your new product, feel free to
reach out to our helpful customer support team at
[phone] or by email at [e-mail].
We hope you enjoy your new product!

Package Contents
1 x Air Mattress
1 x User Manual
Table of Contents
Safety Information 4
Main Functions 5
Set-Up 6
Operation 6
Specifications 8
Warranty 9
Customer Support 10

Safety Information
IMPORTANT: Please read and comply with all of the
instructions and warnings provided in this manual
before using the product. Failure to comply with
the instructions and warnings provided herein may
result in inaccurate results and/or damage to the
product itself.
WARNING: To reduce the risk of burns, fire, electric
shock or injury:
• Always unplug the air mattress when not in use.
• Close supervision is necessary when this
furnishing is used by, or near children, or people
with limited mobility.
• This air mattress is only to be used for its
intended use as described in this manual.
• DO NOT operate this device if it has a damaged
cord or plug, if it is not working properly, if it has
been dropped or damaged, or if it is wet.
• Keep the power cord away from heated surfaces.
• DO NOT block the air openings while the device
is in operation.
• Always keep air openings free of lint, hair, and
other small objects. Never drop or insert objects
into any of the openings.
• DO NOT use the air mattress outdoors or in
damp areas, this product is for household use
only.
• DO NOT operate this device where aerosol
(spray) products are being used or where oxygen
is being administered.
• DO NOT use the air mattress to support video
equipment such as televisions or computer
monitors.
• DO NOT use near people using or wearing
medical devices.
• Keep away from sharp objects that may damage
product. Do not operate with any sharp tools or
gadgets around when mattress is being used.
CAUTION: This device is operated with an electrical
air pump that is thermally protected. The pump does
not contain parts that can be repaired or serviced.
Opening the pump casing may expose to the risk
of electric shock. If you have any issues with the
electrical pump upon arrival, please contact our
helpful customer service team immediately.
• DO NOT open the air pump casing for any
reason.
• DO NOT use on surfaces where heat may cause
a problem.
• A fire may occur if this device touches or is
4

covered by flammable materials including
curtains, draperies, cardboard, plastics etc.,
while in operation.
• DO NOT operate the pump in enclosed spaces
that are not well-ventilated. Always ensure there
is at least 2 ft. of clearance from any wall or
object while the pump is in operation.
• DO NOT operate the pump in the presence of
explosive and/or flammable fumes.
• DO NOT place any part of the pump or cord in or
under water or other liquid.
• DO NOT exceed the weight limit for this device:
550 lb (EAM-DT1) and 650 lb (EAM-DQ1).
SAVE THESE INSTRUCTIONS.
Main Functions
1. Air Mattress (Felt Side Facing Up)
2. Power Cord
3. Power Cord Compartment
4. Control Dial
5. Control Dial Air Valve
6. Manual Inflation/Deflation Valve
1
2
6
5
4
3
5

Set-Up Operation
1. Remove the air mattress from its packaging and
unfold it so that the felt side is facing up.
2. Open the the power cord compartment and
connect the power cord to an electrical outlet.
Inflate
1. Turn the control dial clockwise to “Inflate” the
air mattress.
2. Turn the control dial back to “Off” when the
mattress has reached the desired firmness. Make
sure the control dial is aligned with the “Off”
arrow.
3. Lie on the air mattress to test the firmness.
4. Adjust the firmness by either continuing to
inflate the air mattress or turn the control dial to
“Deflate” to let some air out.
5. Unplug the power cord and store it in the power
cord compartment.
6

Deflate/Storage
1. Plug in the power cord and turn the control dial
counterclockwise to “Deflate” the air mattress.
2. Allow the air mattress to completely deflate.
Unplug the power cord and place it back into the
storage compartment.
3. Make sure the mattress is clean and dry.
4. Lay mattress felt-side up and fold the mattress
into thirds, then roll up the mattress to release
any remaining air.
5. Store the mattress in a cool, dry place.
Manual Inflation/Deflation
Open the first part of the manual inflation/
deflation valve and connect an air pump or hose
to the mattress. Inflate to the desired firmness and
disconnect the air pump.
To deflate the mattress, fully open the manual
inflation/deflation valve to release all of the air from
the mattress.
7

Specifications
Model No. EAM-DT1 EAM-DQ1
Dimensions Twin
75 x 39 x 18 in
191 x 99.1 x 45.7 cm
Queen
80 x 60 x 22 in
203 x 152 x 56 cm
Max. Weight Capacity 550 lb 650 lb
Rated Power 130W 130W
8

Warranty
Terms & Policy
Etekcity warrants all products to be of the highest quality in material,
craftsmanship and service for a minimum of 1 year, effective from
the date of purchase. Warranty lengths may vary between product
categories. Etekcity will replace any product found to be defective
due to manufacturer flaws based on eligibility; refunds are available
within the first 30 days of purchase. This warranty extends only
to personal use and does not extend to any product that has been
used for commercial, rental, or any other use in which the product is
not intended for. There are no warranties other than the warranties
expressly set forth with each product.
This warranty is non-transferrable. Etekcity is not responsible in any
way for any damages, losses or inconveniences caused by equipment
failure or by user negligence, abuse, or use noncompliant with the
user manual or any additional safety, use, or warnings included in the
product packaging and manual.
This warranty does not apply to the following:
• Damage due to abuse, accident, alteration, misuse, tampering or
vandalism.
• Improper or inadequate maintenance.
• Damage in return transit.
• Unsupervised use by children under 18 years of age.
Etekcity and its subsidiaries assume no liability for damage caused by
the use of the product other than for its intended use or as instructed
in the user manual. Some states do not allow this exclusion or limitation
of incidental or consequential losses so the foregoing disclaimer may
not apply to you. This warranty gives you specific legal rights and you
may also have other rights which may vary from state to state.
ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING
THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE
PERIOD OF THE LIMITED WARRANTY.
Should your product prove defective within the specified warranty
period, please return the defective unit in its original packaging with
(1) an original copy of the invoice, (2) your order confirmation number,
(3) and your warranty ID number.
To find out more about extending your warranty, visit
www.etekcity.com/warranty or contact customer support.
Date of Purchase
Place of Purchase
Order Number
9

Customer Support
Should you encounter any issues or have any questions regarding your new product, feel free to contact our
helpful Customer Support Team. Your satisfaction is ours!
Customer Support
Etekcity Corporation
1202 N Miller St. Suite A
Anaheim, CA 92806
Toll-Free: [phone]
Fax: [phone]
Local: [phone]
Email: [e-mail]
Support Hours
Monday - Friday:
9:00 am - 5:00 pm PST
*Please have your order confirmation number ready
before contacting customer support.
10

Connect with us @Etekcity.

Scan here to join the community!
Visit us at www.etekcity.com
Building on better living.