Eternytime ET-007 User manual
Copyright © 2018 Eternytime® S.A.S 1
ETERNYTIME
ANR* Headset ET-007
Version 08.2018
*ANR = Active noise reduction
Copyright © 2018 Eternytime® S.A.S 2
Thank you for purchasing the Eternytime ANR Headset ET-007. For the best performance, we
recommend that you read the manual carefully.
Notice This user’s manual cannot be copied, translated or transformed into different media
without a prior written consent from Eternytime S.A.S, according to the copyright laws. This
user’s manual and product pertinent to this manual may have misprints or technical flaws, which
can be modified without prior notice to the readers. Eternytime S.A.S is not liable for any
damage caused by failure to meet the requirements in this user’s manual.
The documentation provided will allow you to fully enjoy all the features this unit has to offer.
Please save this manual for future reference
1. Features
Maybe the lightest headset available on the market with less than 200 grams.
Advanced reverse noise canceling technology, reduce 90% background noise. Noise
canceling special use 50mm drive, whole pieces forming corona diaphragm for crystal clear
high-quality voice.
Operation mode optional: ANR mode / common mode.
Full cover cap design, high quality gel, anti-fatigue for long time wearing.
a) Getting started
Fitting your headset is the key to comfortable use and the superior Active noise reduction
(ANR) of the ET-007. A solid seal around your entire ear and a symmetrical fit across the top
of your head are necessary for you to experience peak performance from the ANR feature.
The following steps will assist you in achieving the proper fit:
- Extend the slider fully
- Place the headset on your head and compress the slider slowly on each side until the head
pad rests
Softly on the top of your head
- Adjust the ear cups to ensure the ears are fully inside the ear seal and there is uniform
pressure on your head
Adjust correctly the ear seals to avoid disturbing noise. The microphone can be rotated to be
placed on the right or left side of the headset.
To adjust the microphone placement, rotate the microphone from its base and bend the
flexible boom. For clear communication, the microphone should be placed approximately
3mm (1/8 inch) from the lips.
b) Battery type
The ET-007 requires two AA (LR6) batteries.
Use Alkaline batteries from trusted brands for best performance. Rechargeable batteries are
not recommended since they provide an uneven voltage power which interferes with the
active noise redactor. Your Eternytime ET-007 will continue its basic operation (hearing and
transmission) on a passive noise reduction basis without batteries.
Copyright © 2018 Eternytime® S.A.S 3
c) Battery life
A set of brand new Alkaline batteries can provide up to 48 hours of operation. However, the
exact duration depends on the amount of noise reduction required in your environment.
To maximize battery life, turn off the ANR function when the headset is not in use.
d) Battery installation
To open the battery compartment door
Press on the top of the cover and slide the cover along the controller unit
Copyright © 2018 Eternytime® S.A.S 4
c) Controller unit
Each ear can be independently adjusted.
Audio link cable included
1. Right volume slider pot knob
2. Left volume slider pot knob
3. Stereo selector
4. Mono selector
5. 3.5mm Jack socket for auxiliary audio input
d) Auxiliary input (jack 3.5mm socket)
Audio link cable included
Enjoy the great Hi-Fi sound quality via the auxiliary audio Jack.
Your ET-007 can be connected to an external audio source such as smartphone, portable
audio device or GPS. The auxiliary input is on the side of the Controller unit.
Copyright © 2018 Eternytime® S.A.S 5
e) Power ON and noise cancelling system
1. Noise cancelling microphone
A noise cancelling microphone is installed on each ear cup
DO NOT COVER OR OBSTRUCT
2. Power ON / OFF switch
To maximize battery life, turn off the ANR function when the headset is not in use
Copyright © 2018 Eternytime® S.A.S 6
2. Technical specifications
General
Battery power supply: 3V 2x AA LR6 Batteries
Operating temperature: -35°C to 75°C (-31°F to 167°F)
Cord length: 160cm
Weight: 570g (20oz)
Headphone
Type: Dynamic
Freqency response: 50 Hz – 20 kHz
Sensitivity: 95 +/-5 dB SPL
Microphone and Amplifier
Type: Noise-cancelling Electret
Frequency response: 1000 Hz to 5 kHz
2 years warranty
Copyright © 2018 Eternytime® S.A.S 7
1. Warranty
a. Subject to Eternytime Terms of Service, Eternytime warrants all hardware products and
accessories contained in the original packaging with a Eternytime trademark or logo (for the
sole purpose of the Warranty Terms, each a " Eternytime" product) against defects in
materials and workmanship when used in accordance with Eternytime's user manuals,
technical specifications and other Eternytime Product guidelines for a period of TWO (2)
YEARS from the date of original retail purchase by the end-user purchaser as shown by an
invoice or sales receipt for the Eternytime Product (the "Warranty Period"). You will be able
to receive the remedies available under the Two-Year Limited Warranty for your Eternytime
product via local Eternytime service facilities.
1. WHAT IS NOT COVERED BY THIS WARRANTY?
a. Eternytime does not warrant that the operation of any Product will be uninterrupted or
error-free. Eternytime is not responsible for damage arising from failure to follow
instructions relating to the Product's use.
b. All warranties, conditions and other terms not set out in this warranty document are
excluded from the Eternytime Two-Years Limited Warranty. When contacting Eternytime via
telephone, call charges may apply depending on your location. Please contact your network
operator for details.
c. THIS WARRANTY DOES NOT APPLY TO ANY NON-ETERNYTIME BRANDED HARDWARE
PRODUCTS OR ANY SOFTWARE, EVEN IF PACKAGED OR SOLD TOGETHER WITH
ETERNYTIME PRODUCTS.
d. Non- Eternytime branded products may enjoy the benefit of a manufacturer's warranty -
please check your product box and literature for details.
e. This warranty does not apply: (a) to consumable parts, such as batteries or protective
coatings that are designed to diminish over time, unless failure has occurred due to a defect
in materials or workmanship; (b) to cosmetic damage, including but not limited to scratches,
dents and broken plastic on ports; (c) to damage caused by use with another product; (d) to
damage caused by accident, abuse, misuse, liquid contact, fire, earthquake or other external
cause; (e) to damage caused by operating the Eternytime Product not in conformance with
the user manual, the technical specifications or other Eternytime Product published
guidelines; (f) to damage caused by using of incorrect voltage lines, fuses, circuit breakers, or
incompatible load types as set forth in the user manual; (g) to damage caused by service
(including upgrades and expansions) performed by anyone who is not a representative of
Eternytime; (h) to an Eternytime Product the functionality or capability of which has been
modified or altered without the written permission of Eternytime; (i) to defects caused by
normal wear and tear or otherwise due to the normal aging of the Eternytime Product; (j) if
any serial number has been removed or defaced from the Eternytime Product, or (k) if the
product is stolen or Eternytime reasonably believes that the product is stolen based on
information provided by law enforcement authorities.
f. Eternytime does not warrant, represent or undertake that it will be able to repair or replace
any Eternytime Product under this warranty without the risk of loss of information or data
stored on the Eternytime Product. This warranty does not include any Non- Eternytime
branded components installed. This limited warranty does not cover any damage to the
product that results from abnormal mechanical or environmental conditions, abuse, accident,
improper installation, misuse, insufficient or excessive electrical supply, natural disaster, or
any unauthorized disassembly, repair, or modification. This limited warranty also does not
apply to any product on which the original product label or UPC information has been
altered, obliterated or removed, has not been handled or packaged correctly, has been sold as
second-hand, or has been resold in violation of any export regulations.
Copyright © 2018 Eternytime® S.A.S 8
This limited warranty covers only replacements for defective Eternytime Products, as described
above. Eternytime is not liable for any loss of data or any costs associated with diagnosing the
source of system problems or installing, removing or servicing Eternytime Products. This
warranty excludes third-party software, connected equipment or stored data. In the event of a
claim, Eternytime 's sole obligation shall be to replace our product with its equivalent or the best
possible substitute.
g. Under no circumstances shall Eternytime be liable in any way to the user for damages,
including any lost profits, lost savings or other incidental or consequential damages arising
out of the use of, or inability to use the Eternytime products. Eternytime reserves the right
to revise or update its products, software, or documentation in keeping with technological
advances without obligation to notify any individual or entity.
h. ETERNYTIME IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR
CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO
LOSS OF USE; LOSS OF REVENUE; LOSS OF ACTUAL OR ANTICIPATED PROFITS (INCLUDING
LOSS OF PROFITS ON CONTRACTS); LOSS OF THE USE OF MONEY; LOSS OF ANTICIPATED
SAVINGS; LOSS OF BUSINESS; LOSS OF OPPORTUNITY; LOSS OF GOODWILL; LOSS OF
REPUTATION; LOSS OF, DAMAGE TO OR CORRUPTION OF DATA; OR ANY INDIRECT OR
CONSEQUENTIAL LOSS OR DAMAGE HOWSOEVER CAUSED INCLUDING THE REPLACEMENT
OF EQUIPMENT AND PROPERTY, ANY COSTS OF RECOVERING, PROGRAMMING, OR
REPRODUCING ANY PROGRAM OR DATA STORED OR USED WITH ETERNYTIME PRODUCTS
AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE
PRODUCT. THE FOREGOING LIMITATIONS SHALL NOT APPLY TO ANY GROSS NEGLIGENCE
OR INTENTIONAL MISCONDUCT BY ETERNYTIME AND TO THE EXTENT PROHIBITED BY
APPLICABLE LAW.
i. ETERNYTIME'S SOLE RESPONSIBILITY FOR HARDWARE DEFECTS IS LIMITED TO EITHER
REPAIR OR REPLACEMENT OF SUCH PRODUCTS AS SHALL BE DETERMINED BY
ETERNYTIME IN ITS SOLE DISCRETION. ALL EXPRESS AND IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN TIME TO THE TERM OF THIS
LIMITED WARRANTY. NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY
AFTER THE EXPIRATION OF THE LIMITED WARRANTY PERIOD. SOME STATES OR
JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THIS LIMITATION MAY NOT APPLY TO YOU.
2. YOUR RESPONSIBILITIES
a. If your Eternytime product is capable of storing software programs, data and other
information. You should make periodic backup of the information contained on your
Eternytime product to protect the contents and as a precaution against possible operational
failure.
b. Before submitting your Eternytime Product for warranty service you should make separate
backup of the contents of its storage media, remove all personal information and disable all
security passwords. The contents of your Eternytime Product's storage media may be erased,
replaced and/or reformatted in the course of service.
c. Following warranty service, your Eternytime Product or a replacement product will be
returned to you. Eternytime may install system software updates as part of warranty service
that will prevent the Eternytime Product from reverting to an earlier version of the system
software. Third party applications installed on the Eternytime Product may not be compatible
or work with the Eternytime Product as a result of the system software update. You will be
responsible for reinstalling all other software programs, data and information. Recovery and
reinstallation of other software programs, data and information are not covered under this
warranty.
Copyright © 2018 Eternytime® S.A.S 9
d. You may seek service in a country that is not the country of your purchase, and in such a case
you will comply with all applicable import and export laws and regulations and be responsible
for all custom duties, V.A.T. and other associated taxes and charges.
e. IMPORTANT: DO NOT OPEN THE ETERNYTIME PRODUCT UNLESS YOUR USER MANUAL FOR
THE PRODUCT DESCRIBES HOW IT IS DESIGNED FOR OPENING. OPENING YOUR
ETERNYTIME/CHRONELEC PRODUCT IN VIOLATION OF THIS PARAGRAPH WILL FORFEIT
YOUR RIGHT TO CLAIM WARRANTY SERVICE FROM ETERNYTIME.
3. WHAT WILL ETERNYTIME DO IN THE EVENT OF A WARRANTY CLAIM?
a. If you submit a valid claim under this warranty, Eternytime will, at its option:
b. (i) repair the Eternytime Product using new or previously used parts that are equivalent to
new parts in performance and reliability, or
c. (ii) replace the Eternytime Product with a product that is functionally equivalent to the
Eternytime Product and is formed from new and/or previously used parts that are
equivalent to new parts in performance and reliability.
d. When a product or part thereof is replaced, any replacement item becomes your property
and the replaced or refunded item becomes Eternytime's property.
e. A replacement part or product or a repaired Eternytime Product assumes the remaining
warranty of the original Eternytime Product or one (1) year from the date of replacement or
repair, whichever provides longer coverage for you.
4. HOW TO OBTAIN WARRANTY SERVICE?
Please access and review the online support .
https://eternytime.com/after-sales
5. GENERAL
No Eternytime reseller, agent, or employee is authorized to make any modification,
extension, or addition to this warranty.
.
Copyright © 2018 Eternytime® S.A.S 10
NOTE
Copyright © 2018 Eternytime® S.A.S 11
NOTE
Table of contents
