Ethnicraft Teak Bok User manual

IN YOUR PACKAGE :
ASSEMBLY INSTRUCTION
HARDWARE ( AS LISTED ABOVE)
SYMBOLS NOTICE
X2
SMB NA SELYINSTRUCTIO
PARTS TO BE INSTALLED
1. TOP PANEL 1pc
2. LEGS 2pcs
3. LEG 1set
WHEN LIFTING THE TABLE :
- LIFT ONLY ON THE APRON
- MAKE SURE TABLE IS IN UNEXTENDED POSITION
WHEN LIFTING THE TABLE :
- LIFT ONLY ON THE APRON
- MAKE SURE TABLE IS IN UNEXTENDED POSITION
X
RECOMMENDATION :
In order to avoid colour differences between
the fixed table top and the extensions due to
UV light, we suggest to put your dining table in
extended version during the first month.
TOOLSHARDWARE ENCLOSED
TEAK BOK EXTENDABLE DINING TABLE
ASSEMBLY INSTRUCTIONS FOR DINING TABLE INSTALLATION
USE L KEY
TO TIGHTEN
USE
SCREWDRIVER
USE HANDNUMBER OF
PERSON NEEDED
DIRECTION X
1
2
2
3
SPAX SCREW
(4 pcs)
M6x120
JCBC SCREW
(6 pcs)
M6x50
SPAX SCREW
(4 pcs)
x100M6
WASHER
(8 pcs)
M6x18
WASHER
(6 pcs)
M8x23
SCREWDRIVER
(not included in package)
L KEY
(included in package)
SCISSORS
(not included in package)
TORX ALLEN
SCREW
(included in package)
USE TORX ALLEN
SCREW TO TIGHTEN
1/5

A.
REMOVE WOODEN PIECES
TEAK BOK EXTENDABLE DINING TABLE
ASSEMBLY INSTRUCTIONS FOR DINING TABLE INSTALLATION
B.
INSTALLING THE LEGS TO TABLE TOP
- USE SPAX SCREW M6x100 (4X)
- USE WASHER M6x18 (4X)
- TIGHTEN FULLY
!
Position of
wooden pieces
1
REMOVE ROPEREMOVE ROPE
REMOVE WOODEN PIECESREMOVE WOODEN PIECES
12
3
2
2
3
2
2
1
2/5

TEAK BOK EXTENDABLE DINING TABLE
ASSEMBLY INSTRUCTIONS FOR DINING TABLE INSTALLATION
C.
INSTALLING LEG SET TO TABLE TOP
D.
LOCK THE TABLE TOP
Extendable side
3
Legs for extendable side
- USE JCBC SCREW 6x50 (4X)
- USE WASHER M8x23 (4X)
- INSTALLING SCREWS ON THE LEFT & RIGHT SIDE
- DO NOT FULLY TIGHTEN
!
1
2
3/5

TEAK BOK EXTENDABLE DINING TABLE
ASSEMBLY INSTRUCTIONS FOR DINING TABLE INSTALLATION
E.
INSTALLING SCREWS ON THE LEG FOR EXTENDABLE SIDE
5
24 13
6
9
7
8
- UNLOCK BEFORE EXTENDING
- NEED ONE PERSON TO HOLD THE EXTENDABLE PANEL
- USE JCBC SCREW 6x50 (2X)
- USE WASHER M8x23 (2X)
- INSTALLING SCREWS ON THE MIDDLE SIDE
- DO NOT FULLY TIGHTEN
!
10
- NEED ONE PERSON TO HOLD THE
- USE APEX SCREW M6x120 (4X)
- USE WASHER M6x18 (4X)
- TIGHTEN FULLY ALL SCREWS
EXTENDABLE PANEL
!
4/5

F.
EXTENDING
G.
DISMANTLING
NOTE : UNLOCK BEFORE DISMANTLING
NOTE : LOCK AFTER EXTENDING
TEAK BOK EXTENDABLE DINING TABLE
ASSEMBLY INSTRUCTIONS FOR DINING TABLE INSTALLATION
12
4
3
12
4
3
5
1 2 3
1 2 3
5/5