Ethnicraft BED WITH SLATS User manual

BED - WITH / WITHOUT SLATS
ASSEMBLY INSTRUCTION FOR BED INSTALLATION
TOOLS
SYMBOLS
NOTICE
IN YOUR PACKAGE :
ASSEMBLY INSTRUCTION
HARDWARE ( AS LISTED ABOVE )
PARTS TO BE INSTALLED
HARDWARES
1. HEADBOARD 1pc
2. FOOTBOARD 1pc
3. SIDERAILS 2pcs
4. CENTER SUPPORT 1pc
5. CENTER LEG 1pc
L KEY
(Included in package)
HALF MOON NUT
(4 pcs)
BOLT
(4 pcs)
DOWEL
(8 pcs)
WRENCH
(Not included in package)
KEY
(Included in package)
SYMBOLS
DIRECTION NUMBER OF
PERSONS NEEDED
USE SCREWDRIVER
TO TIGHTEN
USE L KEY
TO TIGHTEN
USE HAND
USE KEY
TO TIGHTEN
USE WRENCH
TO TIGHTEN
L BRACKET
(6 pcs)
SCREW DRIVER
(Not included in package)
JCBC SCREW
(8 pcs)
M6 x 6mm
X3
ASSEMBLYINSTRUCTION
2
3
4
3
5
1
1/3

CONNECTING SIDERAIL AND HEAD / FOOTBOARD
A. 12
12
&
B.
CONNECTING LEG SUPPORTCENTER TO CENTER
5
1
2
3
3
43
3
BED - WITH / WITHOUT SLATS
ASSEMBLY INSTRUCTION FOR BED INSTALLATION
2
1
TIGHTEN FULLY
3
5
4
- USE DOWEL (8X)
- USE BOLT (4X)
- USE HALF MOON NUT (4X)
- TIGHTEN FULLY
2/3

INSTALLING CENTER SUPPORT
C.
D.
INSTALLING L BRACKET TO SIDE RAILS
- USE JCBC SCREW M6x6mm (2X)
- TIGHTEN FULLY ALL SCREWS
BED - WITH / WITHOUT SLATS
ASSEMBLY INSTRUCTION FOR BED INSTALLATION
- USE JCBC SCREW M6x6mm (6X)
- TIGHTEN FULLY SCREWS
- INSTALLING L BRACKET AT THE SAME
LEVEL WITH CENTER SUPPORT
1
2
3 4
6
TO ADJUST HEIGHT
5
1 2
3/3