Ethnicraft 11130 User manual

ASSEMBLY INSTRUCTIONS FOR BED INSTALLATION
TEAK LIGHT FRAME BED
CODE
TEAK LIGHT FRAME BED - EU QUEEN SIZE – WITHOUT SLATS 160/200/95
DESCRIPTION
11130
11131 TEAK LIGHT FRAME BED - EU KING SIZE – WITHOUT SLATS 180/200/95
1/5

CODE
TEAK HEADBOARD FOR EU QUEEN BED
DESCRIPTION
P0954
TEAK LIGHT FRAME BED
ASSEMBLY INSTRUCTIONS FOR BED INSTALLATION
HEADBOARD 1piece
A
P0956 TEAK HEADBOARD FOR EU KING BED
CODE
TEAK FOOTBOARD FOR EU QUEEN BED
DESCRIPTION
P0955
FOOTBOARD 1piece
B
P0957 TEAK FOOTBOARD FOR EU KING BED
NOTE
CAREFULLY OPEN THE CARTON, REMOVE CONTENTS
AND LAY OUT ON CARPET OR THE PACKAGING CARTON
BOX OR OTHER PROTECTIVE SURFACE TO AVOID
DAMAGE.
CHECK PACKAGE CONTENTS TO ASSURE ALL THE
NECESSARY HARDWARE AND PARTS ARE RECEIVED
UNDAMAGE. DO NOT USE DAMAGED OR DEFECTIVE
PARTS/ HARDWARE. CONTACT ETHNICRAFT FOR ANY
MISSING PART AND OR HARDWARE.
READ THE ASSEMBLY INSTRUCTION BEFORE
INSTALLATION AND CAREFULLY FOLLOW THE
INSTRUCTION GIVEN. SEEK THE ADVICE OF A
PROFESSIONAL IF YOU ARE NOT FAMILIAR WITH THESE
INSTALLATION OR HAVE ANY DOUBTS ABOUT THE
SAFETY OF THIS INSTALLATION.
IT IS ADVISABLE TO DO THIS ASSEMBLY WITH MINIMUM
OF 3 PERSONS.
PARTS TO ASSEMBLE
X3
ASSEMBLYINSTRUCTION
CODE
TEAK SIDERAIL SET FOR EU QUEEN / KING BED
DESCRIPTION
P0939
SIDERAIL 1set (left & right)
C
CODE
CENTER SUPPORT FOR EU QUEEN / KING BED
DESCRIPTION
H1165
CENTER SUPPORT 1piece
D
CODE
CENTER LEG FOR EU QUEEN / KING BED
DESCRIPTION
H1262
CENTER LEG 1piece
E
2/5

DIRECTION NUMBER OF
PERSONS NEEDED
USE SCREWDRIVER
TO TIGHTEN
USE L KEY
TO TIGHTEN
USE HAND
USE KEY
TO TIGHTEN
USE WRENCH
TO TIGHTEN
H0667
HALFMOON WASHER
(4pcs)
H0666
BOLT
(4pcs)
HALFMOON
TOOLS
(Included in packaged)
H0865
L KEY
H0308
DOWEL
12x50
(8pcs)
Ø
H0949
JCBC SCREW
M6x6
(8pcs)
H0757
JF SCREW
M6x50
(5pcs)
H0744
WASHER
M6
(4pcs)
TOOLS
(Not included in packaged)
SCREWDRIVER WRENCH
H0741
HALFMOON KEY
H0746
NUT
M6
(4pcs)
H0951
L BRACKET
(8pcs)
TEAK LIGHT FRAME BED
ASSEMBLY INSTRUCTIONS FOR BED INSTALLATION
HARDWARE ENCLOSED
SYMBOLS
3/5

CONNECTING SIDERAIL AND HEAD / FOOTBOARD
A.
B.
CONNECTING LEG SUPPORTCENTER TO CENTER
1
TIGHTEN FULLY
B
C
D
C
E
A
TEAK LIGHT FRAME BED
ASSEMBLY INSTRUCTIONS FOR BED INSTALLATION
1 2
3 4
5
H0308
H0666
H0667
1 2
3
TIGHTEN FULLY
H0757
4/5

INSTALLING CENTER SUPPORT
C.
D.
INSTALLING L BRACKET TO SIDE RAILS
- TIGHTEN FULLY ALL SCREWS
- INSTALLING L BRACKET AT THE SAME
LEVEL WITH CENTER SUPPORT
TO ADJUST HEIGHT
TEAK LIGHT FRAME BED
ASSEMBLY INSTRUCTIONS FOR BED INSTALLATION
12
3
4
H0951
H0949
H0757
H0744
H0746
TIGHTEN FULLY ALL SCREWS
H0951
H0949
1
2
5/5