Ethnicraft OAK MADRA 51201 User manual

ASSEMBLY INSTRUCTIONS FOR BED INSTALLATION
OAK MADRA BED - WITHOUT SLATS
51201
51202
OAK MADRA BED - WITHOUT SLATS 180/200/71
OAK MADRA BED - WITHOUT SLATS 160/200/71
1/5

OAK MADRA BED - WITHOUT SLATS
ASSEMBLY INSTRUCTION FOR BED INSTALLATION
SYMBOLS
DIRECTION NUMBER OF
PERSON NEEDED
USE HAND
SMB NAS
ELYINSTRUCTIO
X2
NOTICE
USE L KEY
TO TIGHTEN
IN YOUR PACKAGE :
ASSEMBLY INSTRUCTION
HARDWARE ( AS LISTED ABOVE )
PARTS TO BE INSTALLED
1. HEADBOARD 1pc
2. FOOTBOARD 1pc
3. SIDE RAILS 2pcs
4. MIDDLE SUPPORT 1pc
5. MIDDLE LEG 1pc
HARDWARE ENCLOSED
1
(L)
(R)
2
3
3
4
5
(10X)
6 X 45 mm
JCBC SCREW
M
(4X)
6 X 20 mm
JCBC SCREW
M
(6X)
6 X 6 mm
JCBC SCREW
M
(6X)
L BRACKET
(1X)
6 X 50 mm
COUNTERSUNK
SCREW
M
(12X)
X 40 mm
DOWEL
Ø12
TOOL
L KEY
(Included in package)
2/5

B.
OAK MADRA BED - WITHOUT SLATS
ASSEMBLY INSTRUCTION FOR BED INSTALLATION
INSTALLING FOOTBOARD TO SIDERAILS
A.
INSTALLING SIDE RAILS TO HEADBOARD
(R)
3
1
(L)
3
2
- USE DOWEL
- USE JCBC SCREW M6x45mm (4X)
- DO NOT FULLY TIGHTEN
Ø12x40 mm (8X)
- SCREW LOCATION ON THE BACK SIDE OF BEDHEAD
3
1
- USE DOWEL
- USE JCBC SCREW M6x45mm (6X)
-
Ø12x40 mm (4X)
DO NOT FULLY TIGHTEN
2
3
4
3
1
12
4
3
3/5

D.
OAK MADRA BED - WITHOUT SLATS
ASSEMBLY INSTRUCTION FOR BED INSTALLATION
INSTALLING MIDDLE SUPPORT
C.
INSTALLING MIDDLE LEG TO MIDDLE SUPPORT
- USE COUNTERSUNK SCREW M6x50mm (1X)
- TIGHTEN FULLY
1
5
4
2
3
5mm
TO ADJUST HEIGHT
12
3
4
- USE JCBC SCREW M6x6mm (2X)
FOR STEP 2
- USE JCBC SCREW M6x20mm (4X)
FOR STEP 3
- DO NOT FULLY TIGHTEN
4/5

OAK MADRA BED - WITHOUT SLATS
ASSEMBLY INSTRUCTION FOR BED INSTALLATION
E.
INSTALLING L BRACKET
- USE JCBC SCREW M6x6mm (4X)
- DO NOT FULLY TIGHTEN
1
2
F.
TIGHTEN FULLY ALL SCREWS
5/5