Eureka Forbes euroclean powerclean User manual

Water Filter Assembly & Usage
Installing Your Euroclean Powerclean

INSTALLING YOUR
EUROCLEAN POWERCLEAN

Connecting the high pressure gun
and the spray lance

INSTALLING YOUR
EUROCLEAN POWERCLEAN
4. Connecting the high pressure hose and machine
C

To operate in different water condition and for convenient use. This appliance comes with an water filter. Please follow the below
instruction to assemble it.
Take the filter out from bag, open the apparent
tube and take the seal out.
Fix the filter and put the
seal at the position shown
in the below picture.
Seal

Note: in operation, the screen in filter should be cleaned some time especially if water condition is not good.
Find the input screw
like below picture.
Fix the input screw in pic.3 to
another end of the filter.
Connect the input hose
to the input screw.
Remove the cover from
the water inlet end.
Connect the water filter as
shown in pic.2 to the water
input inlet as shown in pic.4