Euro Towers Podium 3 User manual

Manufactured to a TUV certified ISO 9001:2015 Quality Control System
Certified to BS 8620 standard
STEPFOLD PODIUM 3 SWING GATE
STEPFOLD PODIUM 3 SWING GATE
The new unit offers a platform
height of 2m, working height of
4m and incorporates a specially
designed inclined ladder to allow
safe access to the working
platform.
Also included is a unique telescopic
gated access frame that allows the
operative to enter the platform by
reducing the width of the frame,
access the platform and close the
gate behind them, facing outwards
for maximum safety.
The Stepfold Podium 3 is ideal for
all site requirements that might
include painting and decorating,
plastering, alarm installations,
ventilation on high ceilings and any
other trade jobs that might require a
slightly higher reach than the
standard podiums can provide.
Suitable for both internal and
external applications, the Stepfold
Podium 3 is easy to assemble and
ready to use within minutes. With a
built in folding system wherby the
unit can be folded flat, the unit is
easy to manoeuver and transport.
The Stepfold Podium 3 have been
a very successful addition to the
Euro range products and have
been very well received with the
hire industry.
Stabilizers are included with
every unit.

Always work on the podium with the folding gate facing the work area
When leaving the podium, always descend facing the folding gate
Assembly Instructions
Kit List - Podium 3
Manufactured to a TUV certified ISO 9001:2015 Quality Control System
Certified to BS 8620 standard
STEPFOLD PODIUM 3 SWING GATE
Repeat this process on
the front of the unit in
the opposite direction as
shown.
Fit a diagonal brace from
the 1st to the 4th rung of
the podium at the back of
the unit.
Ensure that the castors
are in the braked
position.
Fit the main platform on
the 8th rung as shown.
Open the unit on a rm
and level base, lock the
folding section.
Fit the ladder 1 rung below
the working platform. Pivot the
rung until the hook is facing
downwards and clip into place.
Access the platform using
the step platform and
ladder, keeping 3 points
of contact with the unit at
all times.
Fit stabilizers on both
sides of the unit.
Fit the step platform at
the base of the unit as
shown.
Please Note: To remove
the ladder, release the
bottom catches and turn
the hooks towards you.
This will enable the top to
be removed.