Euroboor EDG.600 User manual

Electric Die Grinder
EDG.600
User manual
V 1.1 EN | October 2021

www.euroboor.com
2
Congratulations on purchasing this electric die grinder. At EUROBOOR we
strive to exceed our customers’ expectations by developing and providing
premium and innovative portable drilling and cutting solutions. We believe
that a professional like you must be able to rely on a professional supplier.
Which has led us to become a major player in the industrial world, with
our own factory and several offices worldwide. All because we have always
listened to our customers and to the demands from the market.
Our vision is focused on developing innovative portable tools that add
value for our customers and facilitate them in their daily work. We never
lose sight of sustainability, time savings and cost savings.
Enjoy your new machine!
Before operating your new electric die grinder, please first read all
instructions. You find the instructions in this manual and on the warning
label on your machine. With proper use, care and maintenance your
machine will provide you with years of premium grinding performance.
TO REDUCE THE RISK OF INJURY USER MUST READ AND UNDERSTAND
ALL INSTRUCTIONS

www.euroboor.com
3
To view all our offices and their contact information please visit:
www.euroboor.com
The original manual has been produced in the English language. If any
discrepancies should occur in translations, reference must be made to the
original version for clarification.

www.euroboor.com
4
Table of Contents
1. Safety ................................................................................................5
1.1 General safety instructions ...................................................................................5
1.2 Specific safety information for grinding...............................................................10
1.3 Kickback and related warnings............................................................................13
2. Description ......................................................................................15
2.1 Description and features..................................................................................... 15
2.2 Box content.........................................................................................................16
2.3 Serial number......................................................................................................17
2.4 Technical data ..................................................................................................... 18
2.5 Symbols............................................................................................................... 19
2.6 Environmental.....................................................................................................22
3. Assembly.........................................................................................23
4. Using the electric die grinder ...........................................................25
4.1 Switch action.......................................................................................................25
4.2 Speed control......................................................................................................26
4.3 General operation instruction.............................................................................27
5. Maintenance ...................................................................................29
6. Trouble shooting..............................................................................31
7. Exploded View & Spare Parts List.....................................................32
7.1 Exploded view..................................................................................................... 32
7.2 Spare parts list ....................................................................................................33
7.3 Warranty and service ..........................................................................................36
7.4 CE Declaration of Conformity..............................................................................37
7.5 cTÜVus proof of certification ..............................................................................38

www.euroboor.com
5
1. Safety
1.1 General safety instructions
Do not use this electric die grinder before you have thoroughly read and
completely understood this manual, specifically the “General safety
instructions” and ‘’Specific safety information”, including the figures,
specifications, safety regulations and the signs indicating DANGER,
WARNING and CAUTION.
WARNING: When using electric die grinder, basic safety
precautions should always be followed to reduce the risk of fire,
electric shock and personal injury.
Please also observe the relevant national industrial safety regulations.
Non-observance of the safety instructions can lead to an electric shock,
burns and/or severe injuries.
This manual should be kept for later use and enclosed with the electric die
grinder, should it be passed on or sold.

www.euroboor.com
6
Work area
1. Keep your work area clean and well lit. Cluttered and dark work areas
increase the chance of accidents;
2. Do not operate electric die grinder in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust, the power tools
may create sparks which could ignite the dust or fumes;
3. Keep bystanders, children and visitors away while operating an
electric die grinder. Distractions can cause you to lose control.
Electrical safety
1. The electric die grinder plugs must match the outlet. Never modify
the plug in any way. Do not us any adapter plugs. Unmodified plugs
and matching outlets will reduce risk of electric shock.
2. Avoid body contact with grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if
your body is grounded;
3. Don’t expose electric die grinder to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
4. Do not abuse the cord. Never use the cord to carry the electric die
grinder or pull the plug from an outlet. Keep the cord away from heat,

www.euroboor.com
7
oil, sharp edges or moving parts. Replace damaged cords immediately.
Damaged cords increase the risk of electric shock;
5. When operating an electric die grinder, use an extension cord suitable
for outdoor use, this reduces the risk of electric shock.
6. If operating an electric die grinder in a damp location is unavoidable,
use a residual current device (RCD), this reduces the risk of electric
shock.
Personal safety
1. Stay alert, watch what you are doing and use common sense when
using an electric die grinder. Do not use it while tired or under the
influence of drugs, alcohol, or medication. A moment of inattention
while operating the power tool may result in serious personal injury.
2. Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry,
or long hair can be caught in moving parts.
3. Avoid accidental starting. Be sure the switch is off before plugging the
electric die grinder in. Carrying the power tool with your finger on the
switch or plugging in the power tool that has the switch on increases
the chance of accidents.
4. Never place hands, fingers, gloves or clothing near rotating tool parts.
5. Remove adjusting keys or wrench before turning the electric die
grinder on. A wrench or a key that is left attached to a rotating part
of the power tool may result in personal injury.

www.euroboor.com
8
6. Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
7. Use safety equipment. Always wear eye protection. Dust mask, non-
skid safety shoes, hard hat and hearing protection must be used for
optimal safety.
8. If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust-related hazards.
WARNING: Wear ear and eye protection when
using this power tool.
Power tool use and care
1. Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at
the rate for which it is designed.
2. Do not use the power tool when the switch does not turn it on or off.
Any power tool that cannot be controlled with the switch is
dangerous and must be repaired;
3. Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing the power tool. Such
preventive safety measures reduce the risk of starting the tool
accidentally.

www.euroboor.com
9
4. Store your power tool out of reach for children and other untrained
persons. Power tools are dangerous in the hands of untrained users.
5. Maintain the power tool with care. Check for misalignment of moving
parts, breakage of parts and any other condition that may affect the
power tool’s operation. If you detect damage, have the power tool
serviced before use. Many accidents are caused by poorly maintained
tools.
6. Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to
control.
7. Only use accessories that are recommended by EUROBOOR for your
electric die grinder. Accessories that are suitable for one tool may
become hazardous when used on another tool.
8. Use the electric die grinder, accessories and tool bits etc. in
accordance with these instructions and in the manner intended for
the particular type of power tools, taking into account the working
conditions and the work to be performed. Use of the power tools for
operations different from intended could result in a hazardous
situation.
Service
1. Power tool service must be performed only by qualified repair
personnel. Service or maintenance performed by unqualified
personnel could result in risk of injury.

www.euroboor.com
10
2. When servicing a power tool, use only identical replacement parts.
Follow instructions in the maintenance section of this manual. Use of
unauthorised parts or failure to follow maintenance instructions may
create a risk of electric shock or injury.
WARNING: Remove the plug from socket before carrying out any
installation, adjustment, servicing or maintenance.
Residual risk
In spite of following the relevant safety regulations and their
implementation, every power tool involves a certain residual risk which
cannot be completely excluded by safety mechanisms. Power tools must
therefore always be operated with caution!
1.2 Specific safety information for grinding
.WARNING: This power tool is intended to function as a grinder.
Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire and/or
serious injury.

www.euroboor.com
11
1. Operations such as sanding, wire brushing, polishing or cutting-off are
not recommended to be performed with this power tool.
Operations for which the power tool was not designed may create a
hazard and cause personal injury.
2. Never put fingers on the switch button while moving the tool to avoid
unintentional starting of the electric die grinder.
3. Ensure the mounting screws and other assemblies are fixed properly
and securely before operate the electric die grinder. Turn on the
switch and let the tool work for 30 seconds in a safe position. Stop
immediately if considerable vibration or other defects are detected,
have it repaired.
4. Do not use accessories which are not specifically designed and
recommended by the tool manufacturer. Just because the accessory
can be attached to your power tool, it does not assure safe operation.
5. Always use an approved and proper guard when using the accessories.
6. The rated speed of the accessory must be at least equal to the
maximum speed marked on the power tool. Accessories running
faster than their rated speed can break and fly apart.
7. The outside diameter and the thickness of your accessory must be
within the capacity rating of your power tool. Incorrectly sized
accessories cannot be adequately guarded or controlled.
8. The shank size of your accessory must properly fit the spindle of the

www.euroboor.com
12
power tool. Accessories that do not match the hardware of the power
tool will run out of balance, vibrate excessively and may cause loss of
control.
9. Wear personal protective equipment. Depending on application, use
face shield, safety goggles or hearing protectors.
10. Hold power tool by insulated gripping surfaces only, when performing
an operation where the grinding accessory may contact hidden wiring
or its own cord. Grinding accessory contacting a “live” wire may make
exposed metal parts of the power tool “live” and cause electrical
shock.
11. Position the cord clear of the spinning accessory. If you lose control,
the cord may be cut or snagged and your hand or arm may be pulled
into the spinning accessory.
12. Never lay the power tool down until the accessory has come to a
complete stop. The spinning accessory may grab the surface and pull
the power tool out of your control.
13. Regularly clean the power tool’s air vents. The motor fan will draw the
dust inside the housing and excessive accumulation of powdered
metal may cause electrical hazards.
14. Do not run the power tool while carrying it at your side. Accidental
contact with the spinning accessory could snag your clothing, pulling
the accessory into your body.

www.euroboor.com
13
15. Do not use accessories that require liquid coolants. Using water or
other liquid coolants may result in electrocution or shock.
16. Do not leave the tool unattended when it is plugged into an electrical
outlet. Turn off the tool, and unplug it from its electrical outlet before
leaving.
1.3 Kickback and related warnings
Kickback is a sudden reaction to a pinched or snagged grinding accessory.
Pinching or snagging causes rapid stalling of the grinding accessory which
in turn causes the uncontrolled power tool to be forced in the direction
opposite of the accessory’s rotation at the point of the binding.
For example, if a rotary burr is snagged or pinched by the workpiece, the
edge of it that is entering into the pinch point can dig into the surface of
the material causing the rotary burr to climb out or kick out .The rotary
burr may either jump toward or away from the operator, depending on
direction of its movement at the point of pinching.
Kickback is the result of power tool misuse and/or incorrect operating
procedures or conditions and can be avoided by taking proper precautions
as given below:

www.euroboor.com
14
1. Maintain a firm grip on the power tool and position your body and
arm to allow you to resist kickback forces.
2. Always use auxiliary handle, if provided, for maximum control over
kickback or torque reaction during start-up. The operator can control
torque reactions or kickback forces, if proper precautions are taken.
3. When using rotary burrs or other grinding accessories, always have
the workpiece securely clamped. These grinding accessories will grab
if they become slightly canted in the groove, and can kickback. When
a rotary burr grabs, it may jump from the groove and you could lose
control of the grinder.
4. Never place your hand near the grinding accessory. Accessory may
kickback over your hand.
5. Do not position your body in the area where power tool will move if
kickback occurs. Kickback will propel the tool in direction opposite to
the accessory’s movement at the point of snagging.
6. Use special care when working corners, sharp edges etc. Avoid
bouncing and snagging the grinding accessory. Corners, sharp edges
or bouncing have a tendency to snag the grinding accessory and
cause loss of control or kickback.
7. Do not attach a saw chain woodcarving blade or toothed saw blade.
Such blades create frequent kickback and loss of control.

www.euroboor.com
15
2. Description
2.1 Description and features
[Image 2-1]
1. Collet nut
2. Spindle
3. Spindle collar
4. Ventilation slots
5. Slide switch
6. Speed controller
7. Auxiliary handle

www.euroboor.com
16
2.2 Box content
Note: When unpacking, make sure the parts listed below are included. If
missing or broken, please contact distributors as soon as possible.
1 x EDG600 Electric Die Grinder
1 x Auxiliary handle
2 x Spare carbon brush
1 x Spindle lock spanner
1 x Collet nut spanner
1 x User manual
1 x Collet adapter 6 to 3 mm (220V/230V)
1 x 6 mm collet (220V/230V)
1 x 8 mm collet (220V/230V)
2 x 6.35 mm (1/4") collet (120V)

www.euroboor.com
17
2.3 Serial number
The serial number is mentioned on the power tool two times: on the
serial no. sticker on the electric die grinder shell and box. The serial
number will help you, your dealer and EUROBOOR to validate and
identify the power tool.
For example:
210701001
breaks down to:
21 07 01 001
Year month date Identification
of manufacture of manufacture number

www.euroboor.com
18
2.4 Technical data
EDG.600
Metric
Imperial
Collets
3 / 6 / 8 mm
1/4"
Motor power
600 W
5A
Weight
1.8 kg
3 lbs
Power cord
2 m
78 3/4"
No-load speed
12,000 - 27,000 rpm
Voltage
220-230 V / 50-60 Hz
120 V / 60 Hz

www.euroboor.com
19
2.5 Symbols
Symbol
Term, meaning
Explanation
Read documentation
Be sure to read the
documentation in this user
manual and specifically the
“General safety instructions”
and ‘’Specific safety
information’’.
Wear ear protection
Use ear protection during
operation.
Wear eye protection
Use eye protection during
operation.
Danger/warning/caution
Read and apply the
information in the adjacent
text!
European conformity
symbol
Confirms the conformity of the
machine with the directives of
the European Community.

www.euroboor.com
20
Symbol
Term, meaning
Explanation
Class of protection II
Product with double layered
insulation. In case of failure of the
main layer of insulation the product
remains safe due to a second layer of
insulation.
Electromagnetic Compatibility
Able to function acceptably in its
electromagnetic environment.
ISO9001
Certified in accordance with
ISO9001:2015 quality management
system.
cTÜVus
Certified by TÜV Rheinland, a
recognized laboratory for safety
testing approved by US federal
agency OSHA and the Canadian
national standards of CSA.
mm
Millimetre
Unit of measure for the dimensions.
"
Inch
Unit of measure for the dimensions.
kg
Kilogram
Unit of measure for the mass.