EuroLite 51860117 User manual

User Manual
DMX/Art-Net interface via USB and Ethernet LAN, incl. software
No. 51860117
www.eurolite.de
USB/LAN-DMX
DMX/Art-Net Interface
1024 Channels

Contents
Introduction 4
Technical specifications 5
Device Features 5
Software options 6
Housing connectivity 7
Front Panel 7
Rear Panel 7
Software installation 8
USB drivers installation 8
Ethernet connection and configuration 9
DHCP / IP Static 9
DHCP connection 9
Static IP connection 10
Reset of the IP address 10
Connecting to a wifi router 10
Standalone mode settings 11
Device configuration 11
IN/OUT tab 11
"Merge DMX In / DMX Out" option 12
Art-Net/sACN universe range: 13
Options tab 13
Scenes selection and configuration 14
Triggers selection 15
Triggers via Wi-light 2 app and UDP commands 15
Advanced trigger options. 16
Restore after power off 16
Play in priority 16
Save in memory option 17
Basic backup 18
Save to an internal and external micro SD card 18
Save Art-Net or sACN to an external SD card 18
Standalone use 19
Switch to standalone mode 19
External and USB power supply 19

NODE mode setup 20
Setup with the software 20
Network setup 20
NODE Art-Net or sACN mode 20
Setup with the DeviceTool 21
Network setup 21
NODE Art-Net or sACN mode 21
Setup with a Web Browser 22
UDP, Broadcast, Unicast, Multicast 22
Reset the default device 23
NODE wiring diagram 23
Detecting NODEs on the network 24
Art-Net wiring diagram 25
Housing dimensions
Front panel
Back panel
Tops panel
Troubleshooting 27
26
26
26
26

Introduction
The purpose of this technical manual is to develop the options managed by the
interface instandalone mode, refer to software manuals.
This DMX interface is compatible with various Eurolite software solutions. It is ideal
for advanced users, experienced lighting professionals and demanding projects. It
excels at live show control, audio and video timeline synchronization, and precise
sound to light automation, using the latest suite of Eurolite software that transforms
any computer into a powerful lighting control console.
For product updates, documentation, software and support please visit www.eurolite.de. You can find the
latest version of this user manual in the product's download section.
© 2023 Eurolite. All rights reserved.
No part of this document may be reproduced in any form without the written permission of the copyright
owner. The contents of this document are subject to revision without notice due to continued progress in
methodology, design, and manufacturing. Eurolite shall have no liability for any error or damage of any
kind resulting from the use of this document.
All trademarks mentioned herein are the property of their respective owners.
4

Connection example
USB ETHERNET
DMX interface
DMX
DMX
DMX interface

1 - Output DMX A,
2 - Input / Output DMX B
XLR Connector 3 pins
1: Ground
2: Data -
3: Data +
1 - RJ45, Network (LAN)
connection
2 - USB-C, power connect or (5V
DC, 0.3A)
3 - Infrared receiver (no function)
4 - Modes selector (5 s) Art-Net
or sACN
5 - LEDs signals: green (G) and
Yellow (Y)

Software installation
Download the software in the product‘s download section (www.eurolite.d e > product page).
Start the installation program and follow the on-screen instructions.
Select the software application of your choice and make sure to install the USB drivers.
USB drivers installation
Install USB drivers to communicate with the device and change settings.
Installation of USB drivers is required only for Windows at the end of installation.
Drivers for Mac and Linux systems are installed automatically.
Multiple USB connections through USB hubs are supported.
USB drivers verification:
In the Windows Device Manager. Check that the device icon is visible in "USB Bus Controllers".
If drivers are not installed, the Windows Device Manager lists a device with a yellow warning.
On Mac OS, simply check the USB device tree to view "DMX 512 Stand Alone Device". On Linux,
use the "lsusb" command to view "DMX 512 Stand Alone Device" as a list.
After control software installation and USB drive rs
●Connect the device with the USB cable .
●Start the DEVICETOOL or the software and select "Open USB Device" or "USB" to check the
success of drivers installation.