Euromatic DF9-SZ User manual

Model Number DF9-SZ
INSTRUCTION MANUAL
90cm High Velocity
Metal Drum Floor Fan
AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761

2After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Contents
Page
Important Safety Instructions 3
Product Overview 6
Getting Started 7
Instructions 9
Other Useful Information 10

3
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Important Safety Instructions
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Read this manual thoroughly before first use, even if you are familiar with
this type of product. The safety precautions enclosed herein reduce the risk
of fire, electric shock and injury when correctly adhered to. Make sure you
understand all instructions and warnings. Keep the manual in a safe place for
future reference, along with any warranty information, your purchase receipt
and carton. If you sell or transfer ownership of this product, pass on these
instructions to the new owner.
Always follow basic safety precautions and accident prevention measures
when using an electrical appliance, including the following:
Electrical safety and cord handling
• Voltage: Make sure your outlet voltage and circuit frequency correspond to
the voltage stated on the rating label. If this is not the case, do not use the
fan.
• Water: To protect against fire and electric shock, do not immerse the cord,
plug or the fan in water or other liquid, or expose the electrical connections
to water. Ensure your hands are dry before handling the plug or switching on
the fan. Do not use the fan outdoors or on wet surfaces. Protect it from liquid
spills.
• Damage: Check the power cord regularly for visible damage. If the cord
is damaged, do not use the fan. A damaged cord must be replaced by
the manufacturer, its authorised service centres or appropriately qualified
personnel in order to avoid any hazards.
WARNING! Do not pick up or operate the fan if the power cord, plug
or housing is damaged, or after it malfunctions or has been dropped or
damaged in any manner. In case of damage, contact our after sales support
centre.
• Protect the power cord:
- Do not operate the fan with the cord coiled up; always fully unwind.
- Do not twist or kink the cord or let it touch heated surfaces.
- Do not put any stress on the cord where it connects to the product.
- Never carry or pull the fan by the cord.
- Arrange the cord away from any traffic area so no one will trip over it.
- Do not run the cord under carpeting or cover it with rugs or runners.
• WARNING! No extension cord, no speed control device: Do not use
this fan with an extension cord or plug adaptor. To reduce the risk of fire or
electric shock, do not use this fan with any solid-state speed control device.

4After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Important Safety Instructions (Cont.)
• Connection: To insert the plug, grasp it firmly and guide it into the outlet.
Never connect the fan to a power source while disassembled.
• Disconnection: Unplug the fan from the power outlet when it is not in use
and before cleaning, servicing, moving or storing the fan. Grasp the plug
and remove it from the outlet, do not pull on the cord.
Usage conditions and restrictions
• RCD: Unless the area where you want to use the fan is already fitted with
a residual current device (safety switch), we recommend installing an RCD
with a rated residual operating current not exceeding 30mA to provide
additional safety protection when using electrical appliances. See your
electrician for professional advice.
• Commercial use only: This fan is suitable for commercial use only and
should only be place on the floor.
• Attachments: The use of accessory attachments not recommended in this
manual may cause injury or hazards.
• Usage restriction: This fan is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their
safety.
• Children: Supervise children to ensure they do not play with the fan. Close
supervision is necessary when any appliance is used by or near children.
• WARNING! Do not leave unattended during use! Always switch it off and
unplug when not in use, if left unattended, and before cleaning and storing.
• Keep the top clear: Do not place anything on top of fan.
• Proper assembly: Only operate the fan fully assembled with all parts. Do
not use the appliance without the protective grilles (rear and front guards)
in place, as serious personal injury may result. Do not attempt to force the
grille in order to stop or start the fan.
• Location: Place the fan on a flat, level and stable floor surface to avoid
overturning. Do not place it on a soft surface such as carpet.
• Obstructions: Position the fan in an area that is free from obstructions. This
will help to keep the fan’s air intake and outlet grilles free from any blockage.
• WARNING! DO NOT use the fan in the following areas or
circumstances:
- near an open flame, a hot burner, oven or other source of high heat
- outdoors or in areas of high humidity, such as in a bathroom, laundry area,
near a sink, washer, pool or any source of water

5
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Important Safety Instructions (Cont.)
- in a window, as rain may create an electrical hazard
- in areas where paint, petrol, etc. is stored and there is a risk of explosion
or fire from flammable gases, or in areas where substances are being
sprayed.
• Rapid air movement: High velocity fans are designed to create rapid air
movement, therefore, make sure the fan is not place near drapes, curtains
or any objects that may be drawn into the fan outlet.
• CAUTION! Personal safety: Avoid contact with moving parts. Never insert
fingers, pencils or any other objects through the grilles when the fan is
running. Keep hair and loose clothing well away from the fan when it is in
use.
• Airflow: Ensure nothing is blocking the air outlet and intake grilles. Do not
insert foreign objects into opening as this may cause electric shock and/or a
fire hazard.
• Service: Do not attempt to open the fan. Do not disassemble or modify the
appliance. In case of malfunction, have the fan checked and repaired by
qualified service personnel only.
• Misuse: We accept no liability for any damages or personal injury caused by
misuse of the product and/or failure to follow these instructions.

6After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Product Overview
Parts list
1 Fan blade
2 Front and rear safety guards (grilles)
3 Wheels (2)
4 Stand frame
5 Speed control knob (at the back)
6 Handle
6
5
4
2
1
3
Assembly hardware
(as pictured below)
Wheel axle with 2 castor wheels
Screws
Nuts
Gaskets

7
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Before first use
• Unpacking: This product has been packaged to protect it against
transportation damage. Unpack the appliance and keep the original
packaging materials in a safe place. It will help prevent any damage if the
product needs to be transported in the future, and you can use it to store
the appliance when it is not in use. In the event that the packaging is to be
disposed of, please recycle it where possible.
• Safe packaging disposal: Plastic wrapping can be a suffocation hazard
for babies and young children, so ensure all packaging materials are out of
their reach and disposed of safely.
• Inspection: Unwind the cord to its full length and inspect it for damage. Do
not use the appliance if the appliance or its cord have been damaged or are
not working properly. In case of damage, contact our after sales support
centre for advice on examination, repair or return of the damaged product.
• Instructions: Make sure you have read and understood all instructions
and warnings in this manual. Refer to the product overview, opposite, to
familiarise yourself with the product and identify all parts. Pay particular
attention to the safety instructions on the previous pages.
• Assembly: The fan head comes fully assembled. The castor wheels have to
be assembled following the instructions on the next page.
Getting Started
NOTE: Due to continued product improvement, images and illustrations in this
manual may vary slightly from the product purchased. All images in this manual are for
reference purposes only. Parts are not necessarily pictured to scale.

8After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Getting Started (Cont.)
Castor wheel assembly
The castor wheels have to be assembled according to the instructions below
using the assembly hardware supplied.
1. Insert a gasket over the screw thread onto the screw shank (A), then insert
the screw with the gasket through the mounting hole of the footrest (B) and
into the screw hole of the castor wheel axle (C). Screw the parts together.
2. To secure the two parts, insert a gasket over the screw tip (D) and tighten
with a nut (E), using a tool (F).
3. Follow the same procedure to secure the other side of the wheel axle to the
footrest (G).
A B C
D E F
G

9
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Instructions
Placement
• This fan is intended for floor use only. Place it on a level floor surface where
it will not overturn during use.
• As high velocity fans are designed to create rapid air movement, make sure
the fan is not place near drapes, curtains or any objects that may be drawn
into the fan outlet.
Operation
The fan is equipped with three fan speeds, which can be operated with the
speed control knob located at the back of the appliance on the switch box.
• Turn the speed control knob in clockwise direction to start the fan.
[ 0 ] Off
[ 1 ] Low speed
[ 2 ] Medium speed
[ 3 ] High speed
Tilt adjustment
To target the breeze at a particular angle, the fan head can be tilted. Grasp
the handle and move the fan head up or down to the desired position.
Moving the fan
Because of its large size, the fan is equipped with a handle and two wheels
for convenience. When you need to move the fan, grip it by the handle and
pull it along on the two wheels.

10 After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Other Useful Information
Cleaning and maintenance
• Dusting: Make sure the fan is unplugged from the power supply before
cleaning. To remove any dust or dirt that may have accumulated inside or
on the unit, clean the fan periodically by lightly running a vacuum cleaner
nozzle (soft brush) over the front and rear guards. Alternatively, use a soft,
dry cloth for dusting.
• Stubborn stains: Use a slightly damp, soapy cloth for stubborn stains but
be sure the cloth is not too wet. If wiping the switch box with a damp cloth,
make sure no water or other liquid is allowed to enter the motor housing or
interior parts.
• Thorough cleaning: To remove stains from the blades, or for thorough
cleaning before storage, remove the screws that hold the front safety guard
in place. Take off the front guard and clean the blades carefully using a
damp cloth. Do not attempt to remove the fan blade. Do not allow the
motor or other electrical components to be exposed to water. Refit the
front guard. Make sure all screws are securely tightened before reuse.
• Storage: When storing your fan, make sure to keep it in a safe, dry
location, protected from dust. We recommend using the original packaging
for storage. Alternatively, cover the cleaned appliance with a piece of
material or a plastic bag for dust protection.
• Service/repair: The appliance requires no maintenance and contains no
user-serviceable parts. Do not take the motor part apart; do not attempt to
repair or modify the fan. In case of damage or malfunction, or if the power
cord is damaged, have the unit repaired by authorised personnel only, or
contact our after sales support centre for advice on repair or replacement.
WARNING!
• Before cleaning, maintenance or moving the fan, switch off the fan and
disconnect it from the power supply.
• Do not immerse the fan in water or other liquids. Do not spray it with
liquids. Do not allow water to drip on or into the motor housing.
• Never use fuel, solvents, harsh detergents, or abrasive or alkaline
cleaners on any part of the fan.

11
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Other Useful Information (Cont.)
Technical specifications
Power 520W, 220-240V~, 50Hz
Dimensions (mm) 1080 x 530 x 1084 (approx.)
Weight 25.9kg (approx.)
Compliance
This appliance has been fully tested and meets all requirements as set out by
standards AS/NZS 60335.1 and AS/NZS 60335.2.80.
The RCM Mark (Regulatory Compliance Mark) indicates that the product
complies with the relevant guidelines of the ACMA as well as corresponding
government requirements for the safety of electrical devices.
E209
Responsible disposal
• At the end of its working life, make the appliance unserviceable by
unplugging it from the power outlet and cutting the power cord.
• Do not throw this appliance out with your household rubbish. Electrical
and electronic products contain substances which can have a detrimental
effect on the environment and human health if disposed of inappropriately.
Observe any local regulations regarding the disposal of electrical consumer
goods and dispose of it appropriately for recycling. Contact your local
authorities for advice on recycling facilities in your area.

After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Warranty returns
Should you for any reason need to return this product for
a warranty claim, make sure to include all accessories with
the product.
Product does not work?
If you encounter problems with this product, or if it fails to
perform to your expectations, make sure to contact our
After Sales Support Centre on
(AU) 1300 886 649 or (NZ) 0800 836 761.
Distributed by Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO BOX 6056 Frenchs Forest, Australia NSW 2086
Customer Helpline:
(AU) 1300 886 649 (NZ) 0800 836 761
Email: [email protected]
For an electronic version of this manual, please contact our after sales support centre.
IM Version Number Issue Date
V1.0 Original release May 2020