EverFocus EMV400SSD User manual

EMV400SSD
3G Module, 4G Module and Wi-Fi Module Installation
Quick Installation Guide
3G Antenna
3G Module
4G Antennas
4G Module
Wi-Fi Antenna
Wi-Fi Module
Copyright © EverFocus Electronics Corporation
Release Date: April, 2017
EverFocus Taiwan 12F-1, No.79, Sec. 1, Shin-Tai Wu Road, Hsi-Chih, New Taipei City, Taiwan
TEL: [phone] FAX: [phone] www.everfocus.com.tw [e-mail]

-1-
1. Package Content
3G Module Package:
3G Module
RF Cable USB Cable
Hexagon Nut Ring Screw x 2 3G Antenna
4G Module Package:
4G Module
RF Cable X 2 USB Cable
Hexagon Nut X 2 Ring x 2 Screw x 2 4G Antenna x 2

-2-
Wi-Fi Module Package:
Wi-Fi Antenna
Wi-Fi Module
RF Cable USB Cable
Hexagon Nut Ring Screw x 2
2. 3G/4G Module Installation
1. Unscrew the four screws on the rear-side.
2. Pull out the Main Board.

-3-
3. Remove the SSD tray and SSD holder from the Main Board.
a. Unscrew the four screws and unplug the SSD SATA Cable. Remove the
SSD tray from the Main Board.
SSD SATA Cable
b. Unscrew the four screws and remove the SSD holder.
4. Connect the 3G Module / 4G Module to the connector.

-4-
5. Screw the 3G Module / 4G Module with the supplied two screws.
6. Connect the USB cable to the USB connectors.
7. Connect one end of the RF Cable to the 3G Module / 4G Module.
3G Module: one RF Cable.

-5-
4G Module: two RF cables.
8. Remove the Antenna Plug on the rear panel in order to insert the RF Cable
for connecting to the Antenna. For 3G Antenna, remove Ant.1 plug only. For
4G Antennas, remove both of the Ant.1 and Ant.2 plugs.
9. Insert the other end of RF Cable through the antenna hole on the rear-panel,
and then screw the RF Cable using the supplied Ring and Hexagon Nut. For
3G Antenna, insert the RF Cable through Ant.1. For 4G Antennas, insert the
RF Cables through Ant.1 and Ant.2.
Hexagon Nut
Ring

-6-
10. Screw back the SSD holder and SSD tray.
11. Slide the Main Board to the housing and then screw back the four screws.
12. Connect the supplied 3G Antenna to Ant.1; or 4G Antennas to Ant.1 and
Ant.2.
3G Antenna 4G Antenna
13. Insert the 3G/4G SIM card into the SIM Card Slot on the front-panel.

-7-
3. Wi-Fi Module Installation
1. Follow Step 1 to Step 3in 2. 3G/4G Module Installation to pull out the Main
Board and remove the SSD tray and holder from the Main Board.
2. Connect the Wi-Fi Module and the USB Cable to the connectors.
Wi-Fi Module
USB Cable
1
2
2
3
3
1) Place the Wi-Fi Module on the board.
2) Place the lock ring of the USB Cable over the Wi-Fi Module and then
screw the Wi-Fi Module using the supplied two screws.
3) Connect the USB cable to the USB connectors.

-8-
3. Remove the Wi-Fi Antenna Plug (Ant.3) on the rear panel in order to insert
the RF Cable for connecting to the Antenna.
4. Connect one end of the RF Cable to the Wi-Fi Module. Insert the other end
of RF Cable through the Wi-Fi (Ant.3) antenna hole on the rear-panel, and
then screw the RF Cable using the supplied Ring and Hexagon Nut.
Hexagon Nut
Ring
5. Screw back the SSD holder and SSD tray.
6. Slide the Main Board to the housing and then screw back the four screws.
7. Connect the supplied Wi-Fi Antenna to Ant.3.

-9-
8.
EverFocus Electronics Corp.
EverFocus Taiwan:
12F-1, No.79, Sec. 1, Shin-Tai Wu Road,
Hsi-Chih, New Taipei City, Taiwan
TEL: [phone]
FAX: [phone]
www.everfocus.com.tw
[e-mail]
EverFocus Europe - Germany:
Albert-Einstein-Strasse 1, D-46446
Emmerich, Germany
TEL: [phone]
FAX: [phone]
www.everfocus.de
[e-mail]
EverFocus China - Beijing:
Room 609, Technology Trade Building,
Shangdi Information Industry Base,
Haidian District, Beijing 100085, China
TEL: [phone]~39
FAX: [phone]
www.everfocus.com.cn
[e-mail]
EverFocus China - Shenzhen:
4F, No. 2, D4 Building, Wan Yelong
Industrial Park, Tangtou Road, Shiyan,
Baoan, Shenzhen, Guangdong 518101, China
TEL: [phone]
FAX: [phone]
www.everfocus.com.cn
[e-mail]
EverFocus USA - California:
1801 Highland Avenue, Unit A, Duarte, CA
91010, USA
TEL: [phone]
FAX: [phone]
www.everfocus.com
[e-mail]
EverFocus Japan:
3F, Kuramochi, Building II, 2-2-3
Koto-Bashi,Sumida-Ku, Tokyo, 130-0022, Japan
TEL: [phone]
FAX: [phone]
www.everfocus.co.jp
[e-mail]
Your EverFocus product is designed and
manufactured with high quality materials
and components which can be recycled
and reused.
This symbol means that electrical and
electronic equipment, at their end-of-life,
should be disposed of separately from
your household waste.
Please, dispose of this equipment at your
local community waste
collection/recycling centre.
In the European Union there are separate
collection systems for used electrical and
electronic product.
Please, help us to conserve the
environment we live in!
Ihr EverFocus Produkt wurde entwickelt
und hergestellt mit qualitativ
hochwertigen Materialien und
Komponenten, die recycelt und wieder
verwendet werden können.
Dieses Symbol bedeutet, dass elektrische
und elektronische Geräte am Ende ihrer
Nutzungsdauer vom Hausmüll getrennt
entsorgt werden sollen.
Bitte entsorgen Sie dieses Gerät bei Ihrer
örtlichen kommunalen Sammelstelle oder
im Recycling Centre.
Helfen Sie uns bitte, die Umwelt zu
erhalten, in der wir leben!