EverFocus eNVP-JNN-IV-V0008 User manual

AI Mobile NVR with 8 PoE Ports
Based on NVIDIA Jetson Nano / Xavier NX
eNVP-JNN-IV-V0008 (eIVP1570VE)
eNVP-JNX-IV-V0008
User’s Manual
Copyright © EverFocus Electronics Corp.
Release Date: March 2021

AI Mobile NVR with 8 PoE Ports
Based on NVIDIA Jetson Nano / Xavier NX
eNVP-JNN-IV-V0008 (eIVP1570VE)
eNVP-JNX-IV-V0008
User’s Manual
1995-2021 EverFocus Electronics Corp.
www.everfocus.com.tw
Disclaimer
All the images including product pictures or screen shots in this document are for example only. The
images may vary depending on the product and software version. Information contained in this document
is subject to change without notice.
Copyright
All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form
or by any means without written permission of the EverFocus Electronics Corporation.
Acknowledgements
-NVIDIA is a trademark of the NVIDIA Corporation.
-All other product names or trademarks are properties of their respective owners.

ii
Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this manual
for future references.
All cautions and warnings on the device should be noted.
All cables and adapters supplied by EverFocus are certified and in accordance with the
material safety laws and regulations of the country of sale. Do not use any cables or
adapters not supplied by EverFocus to prevent system malfunction or fires.
Make sure the power source matches the power rating of the device.
Position the power cord so that people cannot step on it. Do not place anything over the
power cord.
Always completely disconnect the power before working on the system’s hardware.
No connections should be made when the system is powered as a sudden rush of power
may damage sensitive electronic components.
If the device is not to be used for a long time, disconnect it from the power supply to avoid
damage by transient over-voltage.
Always disconnect this device from any AC supply before cleaning.
While cleaning, use a damp cloth instead of liquid or spray detergents.
Make sure the device is installed near a power outlet and is easily accessible.
Keep this device away from humidity.
Place the device on a solid surface during installation to prevent falls.
Do not cover the openings on the device to ensure optimal heat dissipation.
Watch out for high temperatures when the system is running.
Do not touch the heat sink or heat spreader when the system is running.
Never pour any liquid into the openings. This could cause fire or electric shock.
As most electronic components are sensitive to static electrical charge, be sure to ground
yourself to prevent static charge when installing the internal components. Use a grounding
wrist strap and contain all electronic components in any static-shielded containers.
If any of the following situations arises, please contact our service personnel
([e-mail]):
-Damaged power cord or plug
-Liquid intrusion to the device
-Exposure to moisture
-Device is not working as expected or in a manner as described in this manual
-The device is dropped or damaged
-Any obvious signs of damage displayed on the device
DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH TEMPERATURES
BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES (SEE SPECIFICATION) TO
PREVENT DAMAGE.

iii
FCC Statement
This device complies with Part 15 FCC Rules. Operation is subj
ect to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received including
interference that may cause undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same
or equivalent type recommended by the manufacturer. Dispose of used batteries according to
the manufacturer’s instructions and your local government’s recycling or disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur.
Recycler les batteries usées en accord avec les instructions du fabricant et les directives
gouvernementales de recyclage.

iv
TABLE OF CONTENTS
1. Introduction ............................................................................................................................ 1
1.1 Key Features and Comparison ........................................................................................ 1
1.2 Dimensions...................................................................................................................... 2
1.3 Packing List...................................................................................................................... 2
1.4 Optional Accessories....................................................................................................... 3
1.5 Front Panel...................................................................................................................... 4
1.6 Rear Panel ....................................................................................................................... 5
1.7 Carrier Board................................................................................................................... 6
2. Connection and Installation.................................................................................................... 7
2.1 Mounting......................................................................................................................... 7
2.2 Vehicle Connection ......................................................................................................... 8
2.2.1 Connecting to a Truck with 24VDC ............................................................................. 8
2.2.2 Connecting to a Car with 12VDC................................................................................. 9
2.3 SSD Installation ............................................................................................................. 10
3. Specification.......................................................................................................................... 11
3.1 eNVP-JNN-IV-V0008 (eIVP1570VE)............................................................................... 11
3.2 eNVP-JNX-IV-V0008 ...................................................................................................... 13

eNVP-JNN-IV-V0008 / eNVP-JNX-IV-V0008
1
1. Introduction
EverFocus eNVP-JNN-IV-V and eNVP-JNX-IV-V are fanless AI mobile NVRs based on NVIDIA® Jetson
Nano™ and Jetson Xavier NX respectively, both of the models are fanless and designed for
transportation market.
The models are installed with EverFocus in-house designed NVR software, providing basic NVR
functions including real-time live view, video recording, video playback, alarm notification and etc..
AI functions such as driver fatigue and distraction monitoring, pedestrian detection and vehicle
detection can be performed using the NVR software. To cater to the transportation market, this AI
mobile NVR supports wireless network, GPS, G-sensor, 9-36V wide DC range and complies with
MIL-STD-810G standard.
The models support up to 8 PoE ports and wide operating temperature ranging from -20°C to 65°C.
It also features one removable 2.5 SATA SSD tray, one SIM card slot, two mini PCIe interfaces and
RS-232/RS-485 interfaces, which carries everything you need for computing in your application.
1.1 Key Features and Comparison
Model Name eNVP-JNN-IV-V0008 eNVP-JNX-IV-V0008
Jetson Family
Based on NVIDIA Jetson Nano
Based on NVIDIA Jetson Xavier NX
AI Performance 472 GFLOPs 21 TOPs
CPU Quad-core ARM® Cortex®-A57
MPCore
6-core NVIDIA Carmel ARM®v8.2 64-
bit CPU 6MB L2 + 4MB L3
GPU 128-core NVIDIA Maxwell™ GPU 384-core NVIDIA Volta™ GPU with 48
Tensor Cores
Memory Onboard 4 GB 64-bit LPDDR4
25.6GB/s
Onboard 8 GB 128-bit LPDDR4x @
1600 MHz 51.2GB/s
OS 16 GB eMMC 5.1 16 GB eMMC 5.1
Video Input
IP camera x 8
IP camera x 16
Video Decode
Up to 1 x 4K @60fps
Up to 2 x 4K @60fps
Video Output
HDMI (2.0 a/b maximum 3840 x 2160) x 1; VGA x 1 (optional)
Network
GbE port x1, PoE ports (10/100 MbE, total 75W) x 8
Certificate
CE, FCC, (EN50155, E-Mark project-based)
For more details about the model spec, please refer to Chapter 3 Specification.
Chapter
1

eNVP-JNN-IV-V0008 / eNVP-JNX-IV-V0008
2
1.2 Dimensions
1.3 Packing List
•AI Mobile NVR x 1
•Power Harness Cable x 1 (Please refer to
2.2 Vehicle Connection)
•SSD Lock Key x 2
•Bracket Screw Kit x 1 (with 4 screws and 8
spacers. Please refer to 2.1 Mounting)
Note:
1. Equipment configurations and supplied accessories vary by country. Please consult your
local EverFocus office or agents for more information. Please also keep the shipping carton
for possible future use.
2. Contact the shipper if any items appear to have been damaged in the shipping process.

eNVP-JNN-IV-V0008 / eNVP-JNX-IV-V0008
3
1.4 Optional Accessories
The AI Mobile NVR features Wi-Fi/4G/GPS. You can optionally connect Wi-Fi/4G/GPS module to
the device. Please contact your local EverFocus office or agents for more information.
•Wi-Fi Module
Wi-Fi Antenna
Wi-Fi Module
•4G Module
4G Antenna
4G Module
•GPS Module
GPS
Antenna
GPS Module

eNVP-JNN-IV-V0008 / eNVP-JNX-IV-V0008
4
1.5 Front Panel
13
245
7
689
No.
Name
Description
1 SSD Key Lock Lock and unlock the SSD tray (see 2.3 SSD Installation).
2 SD Card Slot Insert a SD card to the card slot.
3 SIM Card Slot Insert a SIM card to the card slot.
4 LAN/WAN One 10/100/1000 Base-Tx Ethernet ports for connecting to the
network.
5 IR This function is currently reserved.
6 LED Indicator HDD: HDD LED indicator.
Fail: System Fail LED indicator.
7 PoE Ports PoE ports (10/100 MbE, total 75W) for connecting to the IP cameras
or other PoE devices.
8 USB2.0 USB2.0 port.
9 Power Indicator Power LED indicator.

eNVP-JNN-IV-V0008 / eNVP-JNX-IV-V0008
5
1.6 Rear Panel
122
3
4 5 6789
10
No. Name Description
1 Audio Input
Connects to audio input devices, such as microphones. Note that the
microphones with a (built-in) amplifier and external power supply are
required.
2 Antenna Connects the antenna to the AI mobile NVR for 3G / 4G / WiFi / GPS
functions.
3 VGA Port This port is currently reserved.
4 Audio Output
Connects to an audio output device, such as speakers. Note that the
speakers with a (built-in) amplifier and external power supply are
required.
5 USB3.0 USB3.0 port.
6 HDMI Port HDMI display output.
7 RS-232 Port COM port for RS-232.
8 RS-485 Port COM port for RS-485.
9 Alarm IO Provides 4 alarm inputs and 4 alarm outputs.
10 DC Power
Input
Connecting to the power source. For details, please refer to 2.2 Vehicle
Connection.

eNVP-JNN-IV-V0008 / eNVP-JNX-IV-V0008
6
1.7 Carrier Board
Main Board Power Board
IO Board
eIVP1570VE-CB
1
Console
12
Audio In
2
VGA
13
USB 3.0
3
HDD Thermal Sensor
14
HDMI
4
HDD Heater (Reserved)
15
RS232
5
HDD Power
16
RS485
6
Video In / Camera Power
17
Alarm IO (4-input, 4-output)
7
SATA Port x 2
18
Power In
8
10/100 Ethernet PoE Port x 8
19
SIM Card slot
9
USB Port
20
SD Card slot
10
OTG
21
3G, 4G
11
Audio Out
22
GPS
Dimensions (W x D x H)
Main Board: 170 x 179.3 x 35 mm / 6.7" x 7.1" x 1.38"
Power Board: 30.1 x 98 x 25 mm / 1.19" x 3.85" x 0.98"
IO Board: 45 x 98.3 x 18 mm / 1.77" x 3.87" x 0.71"

eNVP-JNN-IV-V0008 / eNVP-JNX-IV-V0008
7
2. Connection and Installation
2.1 Mounting
You can mount the AI mobile NVR onto a surface inside the vehicle.
Support-Mount
Interface
The Mounting Bracket is already installed on the AI mobile NVR. To mount the AI mobile NVR
onto a surface, use the supplied 4 black screws and 8 spacers (place 2 spacers on each screw
hole).
Spacer with a cut
Screw Hole
Screw Hole
Mounting Bracket
Chapter
2

eNVP-JNN-IV-V0008 / eNVP-JNX-IV-V0008
8
2.2 Vehicle Connection
The AI mobile NVR supports input power voltage between 9VDC ~ 36VDC. You can install the AI
mobile NVR in all kinds of vehicles support the above power voltage. The diagrams below are
examples to illustrate the connection inside a car / truck with 12VDC / 24VDC.
2.2.1 Connecting to a Truck with 24VDC
Glove box (inside or underneath)
Driver’s seat (between the seat and the back panel) or underneath the Passenger seat
24V+ GND IGN
Red Black Yellow
24V+ (Red)
Vehicle Battery
+
-
Key Start /
Switch
IGN (Yellow)
Relay (24V)
Fuse (10A)
GND (Black)
24V
Power Harness Cable
Note:
1. If the car is without an ignition key, please connect the IGN (yellow) wire directly or
via a switch to the vehicle battery.
2. It is suggested to use a relay in the installation. Otherwise, the AI mobile NVR will
always draw the power from the vehicle battery.

eNVP-JNN-IV-V0008 / eNVP-JNX-IV-V0008
9
2.2.2 Connecting to a Car with 12VDC
12V+ GND IGN
Red Black Yellow
12V+ (Red)
Vehicle Battery
+
-
Key Start /
Switch
IGN (Yellow)
Relay (12V)
Fuse (10A)
GND (Black)
12V
Power Harness Cable
Note:
1. If the car is without an ignition key, please connect the IGN (yellow) wire directly or
via a switch to the vehicle battery.
2. It is suggested to use a relay in the installation. Otherwise, the AI mobile NVR will
always draw the power from the vehicle battery.
Trunk
Passenger seat (underneath)
Glove box (inside or underneath)
Driver seat (between the seat and side panel)

eNVP-JNN-IV-V0008 / eNVP-JNX-IV-V0008
10
2.3 SSD Installation
Users can install one 2.5” SSD into the AI mobile NVR for recording. Please follow the steps
below to install the SSD.
Note: The AI mobile NVR does not support hot swap for the SSD. Ensure to power off the
device before removing the SSD. Also ensure to remove the SSD only after the power was
completely shut off. This would protect and extend the operating life of the SSD.
1. Make sure the AI mobile NVR is powered-off. Unlock the SSD Tray (turn clockwise) using the
supplied SSD Lock Key.
Lock
Unlock
2. To install the SSD, pull the Release Latch to open the SSD Tray Arm.
Release Latch SSD Tray Arm
3. Insert an SSD into the SSD tray and then push back the SSD Tray Arm.
Note: The models support SSD height with 7mm and 9.5mm. If 7mm SSD is in use, it is
strongly recommended to use a spacer to increase the SSD height from 7mm to 9.5mm to
prevent from wobbling and vibration.
4. Lock the SSD Tray using the supplied SSD Lock Key.

eNVP-JNN-IV-V0008 / eNVP-JNX-IV-V0008
11
3. Specification
3.1 eNVP-JNN-IV-V0008 (eIVP1570VE)
Model No.
eNVP-JNN-IV-V0008 (eIVP1570VE)
System
CPU Quad-core ARM® Cortex®-A57 MPCore processor
GPU NVIDIA Maxwell™ architecture with 128 NVIDIA CUDA® cores
Main Memory Onboard 4 GB 64-bit LPDDR4
OS 16 GB eMMC
Video
Format H.265 / H.264
Video Input
SKU1: IP camera x 8 ;
SKU2: IP camera x 4, analog camera x 4 (M12 to BNC x 4, with DC-
Jack x 4 (total 2A))
Video Output
1x HDMI 2.0 a/b maximum 3840 x 2160; VGA x 1 (optional)
Resolution
1 x 4K @ 60fps | 2 x 4K @ 30fps | 8 x 1080p @ 30fps
Audio
Audio Input
RCA x1
Audio Output
RCA x1
Recording
Format
H.265 / H.264
Resolution
4K @ 60fps | 2x 4K @ 30fps | 8x 1080p @ 30fps
Storage
SATA SSD
1 x 2.5" SATA (removable)
RAID
NA
Network
Ethernet
GbE port x1, PoE ports (10/100 MbE, total 75W): SKU1 x 8 PoE, SKU2
x 4 PoE
Wi-Fi
Optional
3G / 4G
Optional
GPS / G-
S
Onboard G-Sensor, GPS (optional)
Alarm
Alarm Input
Alarm Input x 4
Alarm Output
Alarm Output x 4
Interface Front I/O
Panel
Power button x 1
IR receiver x 1
USB 2.0 x 1
GbE port x 1; PoE port x 8
Micro USB2.0 (Internal OTG) x
1
2.5“ SSD bay x 1
SIM card slot x 1
LED indicator x 2 (HDD, Fail)
Chapter
3

eNVP-JNN-IV-V0008 / eNVP-JNX-IV-V0008
12
Rear I/O Panel
Audio input x 1, Audio output x 1
USB 3.0 x 1, RS-232 x 1, RS485 x 1
HDMI x 1
Alarm IO (4-input, 4-output) x
1
Power input x 1
Antenna port x 5
Expansion Slot Mini PCIe x 2 (full-size USB2.0 x 1, half-size USB2.0 x 1)
General
Power Supply DC 9 – 36V (with ignition pin)
Dimensions
(W x D x H) 175.6 x 183.3 x 50.5mm / 6.9“ x 7.2“ x 2“ (without bracket)
Gross Weight 1.8kg / 4lb
Operating
Temperature -4°F ~149°F (-20°C ~+65°C)
Storage
Temperature -4°F ~185°F (-20°C ~+85°C)
Storage
Humidity 95% @ 40 °C (non-condensing)
Vibration/
Shock MIL-STD-810G
Certification CE, FCC certified; (EN50155, E-Mark project-based)
Note: All specifications are subject to change without notice.

eNVP-JNN-IV-V0008 / eNVP-JNX-IV-V0008
13
3.2 eNVP-JNX-IV-V0008
Model No.
eNVP-JNX-IV-V0008
System
CPU
6-core NVIDIA Carmel ARM®v8.2 64-bit CPU 6MB L2 + 4MB L3
processor
GPU
NVIDIA Volta™ architecture with 384 NVIDIA CUDA® cores ( 21 TOPS
[ INT8 ] )
Main Memory
Onboard 8 GB 128-bit LPDDR4x @ 1600 MHz 51.2GB/s
OS
16 GB eMMC 5.1
Video
Format
H.265 / H.264
Video Input SKU1: IP camera x 16;
Video Output 1x HDMI 2.0 a/b maximum 3840 x 2160; VGA x 1 (optional)
Resolution 4K @ 60fps x 2 | 4K @ 30fps x 4 | 1080p @ 30fps x 16
Audio Audio Input RCA x1
Audio Output RCA x1
Recording Format H.265 / H.264
Resolution 4K @ 60fps x 2 | 4K @ 30fps x 4 | 1080p @ 30fps x 16
Storage SATA SSD 1 x 2.5" SATA (removable)
RAID NA
Network
Ethernet GbE port x1, PoE ports (10/100 MbE, total 75W): SKU1 x 8 PoE
Wi-Fi
Optional
3G / 4G
Optional
GPS / G-
S
Onboard G-Sensor, GPS (optional)
Alarm
Alarm Input
Alarm Input x 4
Alarm Output
Alarm Output x 4
Interface
Front I/O
Panel
Power button x 1
IR receiver x 1
USB 2.0 x 1
GbE port x 1; PoE port x 8
Micro USB2.0 (Internal OTG) x
1
2.5“ SSD bay x 1
SIM card slot x 1
LED indicator x 2 (HDD, Fail)
Rear I/O Panel
Audio input x 1, Audio output x 1
USB 3.0 x 1, RS-232 x 1, RS485 x 1
HDMI x 1
Alarm IO (4-input, 4-output) x
1
Power input x 1
Antenna port x 5
Expansion Slot Mini PCIe x 2 (full-size USB2.0 x 1, half-size USB2.0 x 1)
General
Power Supply DC 9 – 36V (with ignition pin)
Dimensions
(W x D x H) 175.6 x 183.3 x 50.5mm / 6.9“ x 7.2“ x 2“ (without bracket)
Gross Weight 1.8kg / 4lb

eNVP-JNN-IV-V0008 / eNVP-JNX-IV-V0008
14
Operating
Temperature -4°F ~149°F (-20°C ~+65°C)
Storage
Temperature -4°F ~185°F (-20°C ~+85°C)
Storage
Humidity 95% @ 40 °C (non-condensing)
Vibration/
Shock MIL-STD-810G
Certification CE, FCC certified; (EN50155, E-Mark project-based)
Note: All specifications are subject to change without notice.

EverFocus Electronics Corp.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng
Dist., New Taipei City 222, Taiwan
TEL: [phone]
FAX: [phone]
www.everfocus.com.tw
[email protected]
EverFocus China - Shenzhen:
3F, Building 7, Longcheng Industrial Park, No.39,
Longguan No.7 Road, Dalang Street, Longhua,
Shenzhen, Guangdong, China
TEL: [phone]
FAX: [phone]
www.everfocus.com.cn
[email protected]
EverFocus USA - California:
324 W Blueridge Avenue, Orange, CA 92865, USA
TEL: [phone]
FAX: [phone]
www.everfocus.com
[email protected]
EverFocus Japan:
3F, Kuramochi, Building II, 2-2-3 Koto-
Bashi,Sumida-Ku, Tokyo, 130-0022, Japan
TEL: [phone]
FAX: [phone]
www.everfocus.co.jp
[email protected]
Your EverFocus product is designed and
manufactured with high quality materials
and components which can be recycled
and reused.
This symbol means that electrical and
electronic equipment, at their end-of-life,
should be disposed of separately from
your household waste.
Please, dispose of this equipment at your
local community waste
collection/recycling centre.
In the European Union there are
separate collection systems for used
electrical and electronic product.
Please, help us to conserve the
environment we live in!
Ihr EverFocus Produkt wurde entwickelt
und hergestellt mit qualitativ
hochwertigen Materialien und
Komponenten, die recycelt und wieder
verwendet werden können.
Dieses Symbol bedeutet, dass elektrische
und elektronische Geräte am Ende ihrer
Nutzungsdauer vom Hausmüll getrennt
entsorgt werden sollen.
Bitte entsorgen Sie dieses Gerät bei Ihrer
örtlichen kommunalen Sammelstelle oder
im Recycling Centre.
Helfen Sie uns bitte, die Umwelt zu
erhalten, in der wir leben!