EverFocus EZA1281 eZ.HD Series User manual

EZA1281 eZ.HD Series
1080p Dual Power FHD IP66 IR Bullet Camera
User’s Manual
Copyright © EverFocus Electronics Corp.
Release Date: November, 2022
All the images including product pictures or screen shots in this document are for example
only. The images may vary depending on the product and software version. Information
contained in this document is subject to change without notice.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan
TEL: [phone] FAX: [phone] www.everfocus.com.tw

1. Introduction
Equipped with a 1080p Sony STARVIS CMOS sensor, the EZA1281 deliver
1080p full HD image quality. The model provides 2.8-12mm lens with ICR.
Featured with Digital Wide Dynamic Range (D-WDR), the camera can
provide clear images even under backlight circumstances where intensity
of illumination can vary excessively. The EZA1281 supports dual power
(12VDC / 24VAC) and supports both NTSC and PAL scanning systems.
1.1 Packing List
Camera x 1
Mounting Sticker x 1
Hexagonal Wrench x 1
Screw & Screw Anchor x 3
User Manual x 1
1.2 Features
1080p Sony STARVIS CMOS sensor, delivering amazing high sensitivity
Varifocal 2.8-12mm with ICR to capture the desired field of view
Extended IR range of up to 40m / 131ft. with 8 LEDs (depends on
scene IR reflectivity)
D-WDR to improve the visibility under high contrast scene
3-Axis rotation design allows wall or ceiling mounting
IP66-rated with metal housing
Supports dual power (12VDC / 24VAC)
Supports UTC function: Control camera OSD settings directly from
DVR end

2
1.3 Dimensions
1.4 Optional Accessory
BA-E320-I
Color: White
Size: Φ93 x 45(H)mm
Weight: 500g
Material: Metal
1.5 Cable Description
Power Cable
Video Output Cable
1
2
No. Name Descriptions
1 Power Cable Connects to a 12VDC / 24VAC power source.
2 Video Output
1080p output, using a 75 Ohm BNC-type coaxial
cable.

3
2. Installation
1. Stick the supplied Mounting Sticker to the surface to mark the 3 screw
positions. Drill 3 holes on the surface and insert the supplied 3 Screw
Anchors into the screw holes. If you want to run the cable through the
surface, drill a hole within the 3 screw area.
2. To mount the camera to the surface, screw the Camera Base to the
surface using the supplied 3 Screws.
3. Connect the Power Cable to a 12VDC / 24VAC power source. Connect
the Video Output Cable to a monitor or DVR.
4. For the first time installation, check whether the camera is properly
focused. If not, you can manually adjust camera Zoom or Focus using
the supplied L-Type Wrench. On the bottom of the camera, find the
Zoom and Focus nuts. Using the supplied L-Type Wrench to adjust
camera Zoom or Focus.

4
5. You can optionally adjust camera angles. Loosen th e brac ket screw ,
the housing can be adjusted into horizontal for 180° , up and down
for 90° , the bracket base can be adjusted into horizontal for 360°
3. Configuration in the OSD Menu
You can configure camera settings in the OSD menu from DVR end.

5

6

7
EverFocus Electronics Corp.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng
Dist., New Taipei City 222, Taiwan
TEL: [phone]
FAX: [phone]
www.everfocus.com.tw
[e-mail]
EverFocus China - Shenzhen:
2F, Building A, Area A, Longquan Science and
Technology Park,Tongfuyu Phase II, Henglang
Community, Dalang Street, Longhua,Shenzhen
518109, Guangdong, China
TEL: [phone]
FAX: [phone]
www.everfocus.com.tw
[e-mail]
EverFocus USA - California:
324 W Blueridge Avenue, Orange, CA 92865, USA
TEL: [phone]
FAX: [phone]
www.everfocus.com
[e-mail]
EverFocus Japan - Tokyo:
7-6-4-101 Takashimadaira, Itabashi-ku, Tokyo
175-0082, Japan
TEL: [phone]
FAX: [phone]
www.everfocus.co.jp
[e-mail]
Your EverFocus product is designed and
manufactured with high quality materials
and components which can be recycled
and reused.
This symbol means that electrical and
electronic equipment, at their end-of-life,
should be disposed of separately from
your household waste.
Please, dispose of this equipment at your
local community waste
collection/recycling centre.
In the European Union there are separate
collection systems for used electrical and
electronic product.
Please, help us to conserve the
environment we live in!
Ihr EverFocus Produkt wurde entwickelt
und hergestellt mit qualitativ
hochwertigen Materialien und
Komponenten, die recycelt und wieder
verwendet werden können.
Dieses Symbol bedeutet, dass elektrische
und elektronische Geräte am Ende ihrer
Nutzungsdauer vom Hausmüll getrennt
entsorgt werden sollen.
Bitte entsorgen Sie dieses Gerät bei Ihrer
örtlichen kommunalen Sammelstelle oder
im Recycling Centre.
Helfen Sie uns bitte, die Umwelt zu
erhalten, in der wir leben!