evertz 9821EMR-AG-HUB User manual

9821EMR-AG-HUB
User Manual
© Copyright 2019
EVERTZ MICROSYSTEMS LTD.
5292 John Lucas Drive
Burlington, Ontario
Canada L7L 5Z9
Phone: [phone]
Sales: [e-mail] Fax: [phone]
Tech Support: [e-mail] Fax: [phone]
Web Page: http://www.evertz.com
Version 0.1, June 2019
The material contained in this reference guide consists of information that is the property of Evertz Microsystems and is intended solely for the use
of purchasers of the 9821EMR-AG-HUB product. Evertz Microsystems expressly prohibits the use of this guide for any purpose other than the
operation of the contained in this reference guide consists of information that is the property of Evertz Microsystems and is intended solely for the
use of purchasers of the 9821EMR-AG-HUB product. Due to on going research and development, features and specifications in this manual are
subject to change without notice.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz Microsystems Ltd. Copies of
this manual can be ordered from your Evertz dealer or from Evertz Microsystems.

This page left intentionally blank

IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (Servicing) instructions
in the literature accompanying the product.
•Read these instructions
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than other. A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC –
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE
WARNING
DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT
WARNING
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE
WARNING
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE

INFORMATION TO USERS IN EUROPE
NOTE
CISPR 22 CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to the European Union EMC directive. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
INFORMATION TO USERS IN THE U.S.A.
NOTE
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
WARNING
Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s
authority to operate the equipment.
Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface cables
with the shield connected to the chassis ground of the device must be used.
EN60065
Safety
EN504192 2005
Waste electrical products should not be
disposed of with household waste.
Contact your Local Authority for recycling
advice
EN55103-1: 1996
Emission
EN55103-2: 1996
Immunity

9821EMR-AG-HUB
User Manual
Revision 0.1 Page - i
TABLE OF CONTENTS
1. OVERVIEW ...................................................................................................................................1
2. PHYSICAL CONNECTION ............................................................................................................3
2.1. FRONT PANEL.....................................................................................................................3
2.2. REAR PANEL.......................................................................................................................3
2.3. SYSTEM WIRING .................................................................................................................4
2.3.1. Connections for the front of the unit ...........................................................................4
2.3.2. Connections for the Back of the unit ..........................................................................6
3. CONFIGURATION.........................................................................................................................7
3.1. SETTING IPS ON FCS..........................................................................................................7
4. 9821EMR-AG-HUB WEB INTERFACE .........................................................................................9
4.1. SYSTEM .............................................................................................................................10
4.1.1. Control Port Configuration .......................................................................................10
4.1.2. Data Port Configuration ...........................................................................................10
4.1.3. Data Port Monitor.....................................................................................................11
4.1.4. SFP Control .............................................................................................................12
4.1.5. Genlock Control.......................................................................................................12
4.1.6. In-band Control........................................................................................................13
4.1.7. RPC Timeout ...........................................................................................................13
4.1.8. Time Management...................................................................................................13
4.1.9. Card Control ............................................................................................................13
4.2. PRODUCT FEATURES ......................................................................................................13
4.2.1. Product Features .....................................................................................................13
4.2.2. License Control........................................................................................................13
4.3. CROSSPOINT CONTROL ..................................................................................................14
4.3.1. Configuration Guide.................................................................................................14
4.3.2. Crosspoint Control ...................................................................................................15
4.4. SIGNAL INPUT...................................................................................................................20
4.4.1. Global Control..........................................................................................................20
4.4.2. Link Monitoring ........................................................................................................20
4.4.3. Channel Monitoring..................................................................................................21
4.5. IP OUTPUT (S302M) ..........................................................................................................21
4.5.1. Express IP Output....................................................................................................22
4.5.2. IP Output Control.....................................................................................................22
4.5.3. IP Output Advanced Control ....................................................................................22
4.6. IP OUTPUT (AES67) ..........................................................................................................22
4.6.1. Global Control..........................................................................................................23
4.6.2. Express IP Output....................................................................................................24
4.6.3. IP Output Control.....................................................................................................24

9821EMR-AG-HUB
User Manual
Page - ii Revision 0.1
4.6.4. IP Output Advanced Control.................................................................................... 24
4.7. IP INPUT (S302M).............................................................................................................. 24
4.7.1. Global Control ......................................................................................................... 25
4.7.2. Express IP Input...................................................................................................... 25
4.7.3. IP Input Control ....................................................................................................... 25
4.7.4. RTP Control ............................................................................................................ 26
4.8. IP INPUT (AES67).............................................................................................................. 26
4.8.1. Global Control ......................................................................................................... 26
4.8.2. Express IP Input...................................................................................................... 26
4.8.3. IP Input Control ....................................................................................................... 27
4.9. SIGNAL OUTPUT .............................................................................................................. 27
4.9.1. Output Control......................................................................................................... 27
4.9.2. Channel Monitoring ................................................................................................. 27
4.10. DEALY CONTROL............................................................................................................. 28
4.10.1. Global Delay Control ............................................................................................... 28
4.11. PCR CONTROL ................................................................................................................. 29
4.11.1. PCR Output Control ................................................................................................ 29
4.11.2. PCR Input Control................................................................................................... 29
4.11.3. Time Reference ...................................................................................................... 30
4.12. PTP CONTROL.................................................................................................................. 30
4.12.1. PTP Control ............................................................................................................ 30
4.12.2. PTP Monitor
............................................................................................................ 30
4.13. REFERENCE NOTIFY ....................................................................................................... 31
4.13.1. Reference Notify ..................................................................................................... 31
4.13.2. PCR Notify .............................................................................................................. 32
4.13.3. PTP Notify............................................................................................................... 32

9821EMR-AG-HUB
User Manual
TABLE OF CONTENTS Revision 0.1 Page - iii
4.14. NOTIFY...............................................................................................................................33
4.15. SNMP TRAP .......................................................................................................................34
5. 9821EMR-FC WEB INTERFACE ................................................................................................35
5.1. SYSTEM .............................................................................................................................35
5.2. NETWORK MANAGEMENT ...............................................................................................35
5.3. TIME MANAGEMENT.........................................................................................................36
5.4. SFP.....................................................................................................................................37
5.5. MODULE ............................................................................................................................37
5.6. MODULE CONFIGURATION..............................................................................................38
6. FIRMWARE UPGRADE ..............................................................................................................43
6.1. 9821EMR-AG-HUB UPGRADE ..........................................................................................43
6.2. 9821EMR-IO-DANTE-64 UPGRADE ..................................................................................43
6.3. 9821EMR-FC UPGRADE....................................................................................................44
FIGURES
Figure 2-1 : 9821EMR-AG-HUB Front Panel Connections.............................................................3
Figure 2-2 : 9821EMR-AG-HUB Rear Panel Connections..............................................................3
Figure 4-1 : WebEASY® - Login Menu............................................................................................9
Figure 4-2 : WebEASY® - 9821EMR-AG-HUB Main Menu .............................................................9
Figure 4-3 : WebEASY® - System (Part 1)....................................................................................10
Figure 4-4 : WebEASY® - System (Part 2)....................................................................................12
Figure 4-5 : WebEASY® - Product Features .................................................................................13
Figure 4-6 : WebEASY® - Crosspoint Control\Configurable Guide................................................14
Figure 4-7 : Configuration Guide Diagram....................................................................................15
Figure 4-8 : WebEASY® - Crosspoint Control\Dante to Dante, IP and TDM..................................16
Figure 4-9 : WebEASY® - Crosspoint Control\IP to DANTE, IP and TDM/MADI ...........................16
Figure 4-10 : WebEASY® - Crosspoint Control\TDM to Dante, IP and TDM/MADI........................17
Figure 4-11 : WebEASY® - Crosspoint Control\Dante  TDM..................................................18
Figure 4-12 : WebEASY® - Crosspoint Control\ AES67/S302M  Dante .................................18
Figure 4-13 : WebEASY® - Crosspoint Control\ AES67/S302M  TDM/MADI .........................19
Figure 4-14 : WebEASY® - Signal Input........................................................................................20
Figure 4-15 : WebEASY® - IP Output (S302M).............................................................................21
Figure 4-16 : WebEASY® - IP Output (AES67) .............................................................................23
Figure 4-17 : WebEASY® - IP Input (S302M)................................................................................25
Figure 4-18 : WebEASY® - IP Input (AES67)................................................................................26
Figure 4-19 : WebEASY® - Signal Output.....................................................................................27
Figure 4-20 : WebEASY® - Delay Control.....................................................................................28
Figure 4-21 : WebEASY® - PCR Control ......................................................................................29
Figure 4-22 : WebEASY® - PTP Control .......................................................................................30
Figure 4-23 : WebEASY® - Reference Notify ................................................................................31
Figure 4-24 : WebEASY® - Notify .................................................................................................33
Figure 4-25 : WebEASY® - SNMP Trap........................................................................................34
Figure 5-1 : WebEASY® - 9821EMR-FC Main Menu ....................................................................35

9821EMR-AG-HUB
User Manual
Page - iv Revision 0.1
Figure 5-2 : WebEASY® - 9821EMR-FC\System ......................................................................... 35
Figure 5-3 : WebEASY® - 9821EMR-FC\Network management .................................................. 36
Figure 5-4 : WebEASY® - 9821EMR-FC\Time Management........................................................ 36
Figure 5-5 : WebEASY® - 9821EMR-FC\SFP .............................................................................. 37
Figure 5-6 : WebEASY® - 9821EMR-FC\QSFP ........................................................................... 37
Figure 5-7 : WebEASY® - 9821EMR-FC\Module ......................................................................... 38
Figure 5-8 : WebEASY® - 9821EMR-FC\Module Configuration ................................................... 38
Figure 5-9 : WebEASY® - 9821EMR-FC\Module Configuration ................................................... 39
Figure 5-10 : WebEASY® - 9821EMR-FC\Dante Module Information .......................................... 40
Figure 5-11 : WebEASY® - 9821EMR-FC\Dante TDM In and Out Status..................................... 41
Figure 6-1 : WebEASY® - 9821EMR-AG-HUB Top Menu Bar...................................................... 43
Figure 6-2 : WebEASY® - 9821EMR-AG-HUB Firmware Upgrade............................................... 43
Figure 6-3 : WebEASY® - 9821EMR-FC Top Menu Bar............................................................... 43
Figure 6-4 : WebEASY® - 9821EMR-IO-DANTE-64 Firmware Upgrade....................................... 44
Figure 6-5 : WebEASY® - 9821EMR-FC Top Menu Bar............................................................... 44
Figure 6-6 : WebEASY® - 9821EMR-FC Upgrade Link ................................................................ 44
Figure 6-7 : WebEASY® - 9821EMR-FC Firmware Upgrade........................................................ 45

9821EMR-AG-HUB
User Manual
TABLE OF CONTENTS Revision 0.1 Page - v
This page left intentionally blank

9821EMR-AG-HUB
User Manual
Revision 0.1 Page - vi
REVISION HISTORY
REVISION DESCRIPTION DATE
0.1
Preliminary Release
June 2019
Information contained in this reference guide is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use
thereof nor for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document
concerning performance of Evertz products are for informational use only and are not warranties of future performance, either expressed or
implied. The only warranty offered by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or
order confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this reference guide,
no warranty is granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or
order confirmation. Information contained in this reference guide is periodically updated and changes will be incorporated into subsequent
editions. If you encounter an error, please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to
make changes in equipment design or specifications.