Everyday 073-0918-4 User manual

J x 1 L x 1
K x 1
M x 4
A x 1 B x 2 C x 6 D x 6 E x 4
G x 2 H x 4
I x 1
Contents:
3 IN 1 BASKET MANUAL
Front Basket Part A: Large Basket Hook installation for ALL bicycles
Step 1: Place one Support Bracket (H) on the inside of the basket. Then position the Large
Basket Hook (G) outside of the basket, followed by another Support Bracket (Fig1). Place
the Slide Bolt (M) in between the Support Bracket (H) and the Large Basket Hook (G),
secure it loosely using a nut (C) and washer (D). (Fig 2)
Fig. 1 Fig. 2
Front Basket
Can be used as a
F x 2
Front Basket
Side Pannier
Rack top Basket

Step 2: Take the second Large Basket Hook (G) and tighten it between the two Support
Brackets (H) Using (M) (C) and (D) (Fig 3 and 4)
Step 5: Insert the Basket Support Bracket Bolts (B) (Fig 9) and tighten (Fig 10).
Front Basket Part B: Additional Support Bracket Installation for bicycles equipped with
caliper brakes
Step 4: Take the Basket Support Arm (I) slide it into place at the bottom center of the
basket (Fig 7), keeping the end with the furthest hole of the support arm under the second
wire of the basket. Using the Basket Support Bracket (J) place it over top the Support Arm,
making sure the basket rod is in between the bolt holes of both the Support Arm and
Support Bracket. (Fig 8)
Fig. 3 Fig. 4
Fig. 5
Fig. 7 Fig. 8
Step 3: Attach the remaining two Support Brackets (H) to the two Large Basket Hooks (G),
positioning them below the first set. (Fig 5)
Fig. 6

Step 6: Loosen the brake assembly front nut enough so that the Basket Support Arm (I) can
slide in front of the spacer bolt closest to the frame (Fig 11). Tighten the nut of the front
brake assembly, attach the basket to the handlebars using the installed Large Basket
Hooks (Steps 1-3), adjusting the height of the Basket Hooks if needed (Fig 6), and let the
basket settle onto the Basket Support Arm (I). Tighten all the remaining bolts on the brake
assembly, Support Brackets (H), and Basket Support Bracket (J). Ensure that the basket is
sitting level before using. (Fig 12)
Using the Small Basket Hooks (F) instead of the Large Basket Hooks (G), Follow the same
installation method mentioned in Front Basket Installation - Section a)
Step 1: Place one Support Bracket (H) on the inside of the basket. Then position the Small
Basket Hook (F) outside of the basket, followed by another Support Bracket (H) (Fig 1).
Place the Slide Bolt (M) in between the Support Bracket and the Small Basket Hook (F),
secure it loosely using a nut (C) and washer (D).
Step 2: Take the second Small Basket Hook (G) and tighten it between the two Support
Brackets (H) Using (M) (C) and (D) (Fig 3 and 4). Attach the remaining two Support Brackets
(H) to the Small Basket Hooks (G), positioning them below the first set. (Fig 13)
Step 3: Position the height so that it sits firmly against the stays of the rear rack, and then
tighten all the bolts fully (Fig 14). The basket can be folded flat and locked when the
bicycle is parked, but it should NOT be folded at any time while riding. This will cause the
basket hinges to loosen which could lead to your basket becoming unstable while
loaded.
Side Pannier
Fig. 9 Fig. 10
Fig. 11 Fig. 12

Step 2: Positioning the second set of Support Brackets (H) on the other side of the basket.
Repeat step 1 (Fig 17 and Fig 18). Once they are positioned correctly, tighten the
brackets using the Slide Bolts (E), washers (D), and nuts (C) (Fig 18).
*Double check that the basket is secured properly on the rack before loading. A Bungee
cord (K) is included with each basket. Use the Bungee cord (K) to help secure objects in
the basket.
All rear carriers may vary in dimension, please use your own discretion on whether this
basket can be securely attached to your rear rack.
Step 1: Set the basket on top of the rear rack. Place Support Bracket (H) inside of the
bottom panel of the basket position a second Support Bracket (H) underneath the rear
rack right below (Fig 15). Insert Slide Bolt (E) through one end of both Long Bracket holes
and secure it using the washer (D) and nut (C).Repeat this for the opposite end (Fig 16)
Fig. 13 Fig. 14
Fig. 15 Fig. 16
Fig. 17 Fig. 18
Rack Top Basket
FOR CUSTOMER ASSISTANCE CALL: 855-249-1471
EVERYDAYBICYCLES.COM • PRODUCT INFORMATION • INSTRUCTION • CUSTOMER SERVICE