
650W / 750W / 850W Bronze Power Supply User Manual650W / 750W / 850W Bronze Power Supply User Manual
Introduction: Premium Power
Thank you for purchasing an EVGA BQ 80 PLUS®BRONZE series power supply. The 650BQ/750BQ/850BQ is a
high quality power supply that offers great value to gamers / system builders. The modular design provides
custom cable configurations for any application, and due to the ultra silent Teflon Nano-Steel Bearing 140mm fan,
the 650BQ/750BQ/850BQ series reduces heat during heavy load while keeping the decibel level down. Designed
with stability and durability in mind, the 650BQ/750BQ/850BQ series is the perfect choice to power your systems.
Safety Information
WARNING 1: This unit has no user-serviceable parts inside. Opening the casing presents a risk of electrocution and will
void the product’s warranty. EVGA will not be responsible for any result of improper use, including but not limited to,
any use of the product outside of its intended purpose or use inconsistent with the warranty terms available online.
(Warranty information is available at www.evga.com/support/warranty and this manual is available at
www.evga.com/manuals).
WARNING 2: NOT ALL MODULAR CABLES ARE THE SAME OR COMPATIBLE! Use of a non-officially supported cable
may void your warranty, cause a Power Supply failure, and/or cause damage to connected devices. Please use ONLY
officially supported cables included with the Power Supply, or an officially supported set of alternative cables listed for
your specific model of Power Supply made BY EVGA. EVGA will NOT be responsible for damages caused to your power
supply, devices, or non-officially supported modular cables in the event damage is caused by your use of non-officially
supported modular cables.
Installation
STABLE POWER
The 650BQ/750BQ/850BQ has outstanding electrical performance with ultra stable voltage and extremely clean
power output. This can help you achieve the highest possible overclock (optional) and provide the most stable
and reliable power to all components. The 650BQ/750BQ/850BQ also provides up to 85% (115VAC) / 88%
(220VAC~240VAC) efficiency and is 80 PLUS®BRONZE certified.
TOP QUALITY PROTECTIONS
The 650BQ/750BQ/850BQ comes equipped with the most comprehensive protection set possible, including Over
Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Short Circuit Protection
(SCP), Over Temperature Protection (OTP), and Over Current Protection (OCP). This product is also covered by a
5-year warranty and EVGA’s legendary customer service and support.
MODULAR DESIGN
Reduce clutter in the case, improve ambient temperatures with better airflow overall and provide a clean look to
any system. Modular PSU designs allow the user to disconnect the cable from the power supply side if they
are not needed for the specific configuration. This can help free up space inside the case and improve cable
management as well as airflow throughout the system.
Features
EVGA 650W BRONZE
EVGA 750W BRONZE
EVGA 850W BRONZE
with stability and durability in mind, the 650BQ/750BQ/850BQ series is the perfect choice to power your systems.
with stability and durability in mind, the 650BQ/750BQ/850BQ series is the perfect choice to power your systems.
1. Remove the power supply from its packaging.
2. (Optional) Using the provided PSU testing tool, connect the 24-Pin cable to the
PSU, then attach the testing tool to the 24-Pin cable. Connect the ATX power cable
to the PSU and plug the PWR cable into the outlet or surge protector/UPS you plan
to use. Once connected, turn the power switch to the ON position.
Please note: If you are using a water cooling configuration, this testing tool
provides a simple, safe, option for bleeding/draining/testing water cooling
components without the need of a paperclip or other device.
3. Use the screws provided with your case to install the power supply into your
computer. NOTE: It is recommended to install the power supply with the fan
facing down. However, if your case places the power supply at the bottom of the
case and there are no ventilation holes available, it may be best to install the
power supply with the fan facing up for greater efficiency and reliability.
4. Connect the 20+4-Pin ATX cable to the motherboard.
EnglishEnglish 2 3