Evolur CHANGING TRAY User manual

CHANING PAD SOLD SEPARATELY
CHANGING TRAY
AI - 850-00
ASSEMBLY INSTRUCTIONS
Model shown is example only. Styles may vary
1

AI-850-00
Adult assembly required.
Small parts may present choking hazard prior to assembly.
that you follow the steps below:
1. Please read the instructions thoroughly
2. Identify all parts and hardware
3. You may need to provide the following tools:
Philips Head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills Or Drivers
To protect your parts during assembly please please place them on a soft surface. To clean surface, use only water on a damp cloth.
Do not use window cleaner or cleaning abrasive as it will scratch the surface and could damage the protective coating.
ASSE M B LY I N S T RUCTIO N S -Instr u c t ion s pou r l 'assem b l a g e
ÉVOLUR - 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854, Customer Care: [phone]

AI-850-00 4
ASSE M B LY I N S T RUCTIO N S -Instr u c t ion s pou r l 'assem b l a g e
HARDWARE AND TOOL DIAGRAM
x 6 (5/8 x 2
x 5 (1”)
”)
1
A
x 1
B
x 1 C
E x 1 F
D
2
3
45

AI-850-00 5
ASSE M B LY I N S T RUCTIO N S -Instr u c t ion s pou r l 'assem b l a g e
x 1
1
B
x 1
C
2

AI-850-00 6
ASSE M B LY I N S T RUCTIO N S -Instr u c t ion s pou r l 'assem b l a g e
x 2 (1”)
A
3
4

AI-850-00 7
ASSE M B LY I N S T RUCTIO N S -Instr u c t ion s pou r l 'assem b l a g e
x 3 (1”) A
5

AI-850-00 8
ASSE M B LY I N S T RUCTIO N S -Instr u c t ion s pou r l 'assem b l a g e
x 6 (5/8 x 2 ”)
E
D

AI-850-00
ÉVOLUR - 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854, Customer Care: [phone]
!WARNING
* READ ALL INSTRUCTIONS BEFORE USE OF THE CHANGING TRAY OR CHANGING PAD
* KEEP ALL INSTRUCTIONS FOR FUTURE USE
* WARNING: - TO PREVENT DEATH OR SERIOUS INJURY,
ALWAYS KEEP CHILD WITHIN ARM’S REACH
* DO NOT USE THIS CHANING TRAY IF THERE ARE ANY LOOSE JOINTS,
MISSING OR BROKEN PARTS AND / OR SHARP EDGES . CONTACT
DREAM ON ME INC., 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854
FOR REPLACEMENT PARTS AND INSTRUCTIONAL LITERATURE. DO NOT
SUBSTITUTE PARTS OF ANY KIND
* WHEN CHILD REACHES A MAXIMUM WEIGHT OF 30 LBS, THE CHANGING TRAY
SHALL NO LONGER BE USED
* CHANGING PAD SIZED 32.50” X 17” X 1” FOR THIS PRODUCT
* USE A DRRESSER, SOLD SEPARATELY, FOR CHANGING TABLE TO ATTACH
THE CHANGING TRAY
* ALWAYS SECURE THIS UNIT TO THE CHANGING SURFACE OF DRESSER #816 OR #838
OR #843 BY DREAM ON ME INC., OR A SURFACE THAT IS LEVEL, STABLE AND
STRUCTURALLY SOUND WITH A MINIMUM SURFACE DIMENSIONS OF 20” X 58”
3