ewo HB-PRO User manual
MOUNTING INSTRUCTIONS
EWO® HB-PRO optimization module
APPLICATION
The EWO® HB-PRO optimization module is used in the EWO® HB-PRO filter to optimize
the water.
FUNCTIONALITY
EWO® HB-PRO optimizations module acts through:
Information transfer to the water flowing past
magnetism
PRE-CONDITIONS FOR INSTALLATION
Local installation regulations, general guidelines and technical data must be noted.
The installation location must be frost-proof and ensure protection against chemicals,
dyes, solvents, vapors and environmental influences.
MOUNTING INSTRUCTIONS
Installation of the module into the EWO® HB-PRO only as shown below
The screw and the flattened wings of the
insert
mark the top
(on the filter housing
head)
underside topside
OPERATION & MAINTENANCE
The EWO® HB-PRO optimizing module is maintenance free.
SCOPE OF DELIVERY
1 EWO® HB-PRO optimization module
1 mounting instructions
WARRANTY
The latest version of the national statutory warranty provisions apply.
Contact:
Name: EWO Wassertechnik GmbH
Street: Anzing 48
ZIP-Code: 4113
City: St. Martin/Mühlkreis
State: Austria
Tel: +43 7232 2754-0
E-Mail: office@ewo-wasser.at
The copyright of this manual remains with the manufacturer. No part of this manual may be reproduced, processed, or
distributed using electronic systems in any form without the written permission of EWO Wassertechnik GmbH. The
information corresponds to the knowledge available at the time of preparation. Printing errors, mistakes and changes are
reserved. Illustrations are not to scale. All information is based on the characteristics of the Austrian market.
Edition: September 2020
Table of contents
Other ewo Control Unit manuals
