Exerpeutic 1318 User manual

Ite
m
IMP
O
Reta
i
The
s
with
o
m
#1318
O
RTANT:
R
i
n this o
w
s
pecificati
o
o
ut notice.
O
W
R
ead all i
n
w
ner’s ma
n
o
ns of this
W
NE
R
El
l
n
struction
s
n
ual for f
u
p
roduct m
R
’S
M
l
ipti
c
s
carefull
y
u
ture refe
r
m
ay vary fr
o
M
ANU
A
c
al
y
before
u
r
ence.
o
m this ph
o
A
L
u
sing this
o
to, subje
c
product.
c
t to chan
g
g
e

1318.2‐030615

SERVICE ------------------------------------------------------------------------ 2
LABEL PLACEMENT --------------------------------------------------------- 3
PRODUCT SAFETY ---------------------------------------------------------- 4
OVERVIEW DRAWING ------------------------------------------------------ 5
PARTS LIST --------------------------------------------------------------------- 6
HARDWARE & TOOLS LIST ----------------------------------------------- 9
ASSEMBLY ---------------------------------------------------------------------- 10
COMPUTER ---------------------------------------------------------------------25
ADJUSTMENT ----------------------------------------------------------------- 32
TROUBLE SHOOTING & MAINTENANCE ----------------------------- 33
WARM UP ---------------------------------------------------------------------- 34
WARRANTY -------------------------------------------------------------------- 35
FAX FORM ---------------------------------------------------------------------- 36
1
TABLEOFCONTENTS

IMPORTANT: FOR NORTH AMERICA ONLY
To request product service and order
replacement parts, please call our
customer service department at:
1-844-641-7921
Monday through Friday, 8:00 AM-5:00 PM Pacific Standard Time,
or email us at: [e-mail]
Please visit our website at www.paradigmhw.com.
Please have the following information ready when requesting for service:
Your name
Phone number
Model number
Serial number
Part number
Proof of Purchase
*Before returning this product to the store please contact
customer service at the contact number.
Paradigm Health & Wellness, Inc.
1189 Jellick Ave.
City of Industry, CA 91748, USA
SERVICE
2

3
LABELPLACEMENT

Basic precautions should always be followed, including the following
Important safety instructions when using this equipment. Read all
instructions before using this equipment.
1. Read all the instructions in this manual and do warm up exercises before
using this product.
2. Before exercise, in order to avoid injuring your muscles, warm-up
exercise for every muscle group is highly recommended. Please refer to
the Warm Up pages for pre and post workout.
3. Please make sure all parts are not damaged and functioning before use.
This product should be placed on a flat surface when using. Using a mat
or other covering material on the ground is recommended.
4. Please wear proper clothes and shoes when using this equipment; do not
wear clothes that might catch any part of the equipment.
5. Do not attempt any maintenance or adjustments other than those
described in this manual. Should any problems arise, discontinue use
and consult an Authorized Service Representative.
6. Be careful when stepping on or leaving the pedals. Make sure to hold on
to the handlebars when mounting and dismounting. When mounting,
make sure the pedal is at its lowest point before you step on. While in
use, please onto the handlebars and use both the pedals and the
handlebars in tandem to insure a smooth, effective workout.
7. Do not use the product outdoors.
8. This product is for household use only.
9. Only one person should be on the product while in use.
10. Keep children and pets away from the product while in use. This
machine is designed for adults only. This product requires a minimum of
6 feet of space for safe operation.
11. If you feel any chest pains, nausea, dizziness, or short of breath, you
should stop exercising immediately and consult your physician before
continuing.
12. The maximum weight capacity for this product is 270 lbs/123 kgs.
WARNING: Before beginning any exercise program consult
your physician. This is especially important for the people who are
over 35 years old or who have pre-existing health problems. Read all
instructions before using any fitness equipment.
CAUTION: Read all instructions carefully before operating this
product. Retain this Owner’s Manual for future reference.
PRODUCTSAFETY
4

OVERVIEWDRAWING
5

No. Description Qty No. Description Qty
001 Main Frame 1 021R Right Cover 1
002 Front Stabilizer Ø60x1.5tx510mm 1 022L Left Foot Pedal 1
003 Rear Stabilizer Ø60x1.5tx590mm 1 022R Right Foot Pedal 1
004 Front Post Ø60x2.0tx975mm 1 023A Lower Crank Cover A (Black) 2
005 Handlebar Ø32 1 023B Lower Crank Cover B (Black) 2
006L Upper Left Handrail Ø32 1 024 Belt Pulley Ø214 1
006R Upper Right Handrail Ø32 1 025 Belt Pulley Ø180 1
007L Left Handrail Arm Ø32 1 026 Handrail Foam Grip
Ø32x5tx750mm 2
007R Right Handrail Arm Ø32 1 027 Handlebar Foam Grip
Ø32x3tx380mm 2
008 U Shape Bracket 2 028 Flywheel Ø200-4kg 1
009L Left Foot Bar 1 029 Magnet Bracket 1
009R Right Foot Bar 1 030 Handlebar End Cap Ø32 2
010 Crank 2 031 Handrail End Cap Ø50 2
011 Sensor with Wire L=150mm 1 032 Hexagon Socket Head Bolt
M8x15mm 2
012 Computer Wire L=1050mm 1 033 Bolt M5x20mm 2
013A Front Decorate Cover for Front
Post 1 034 Carriage Bolt M8x70mm 4
013B Rear Decorate Cover for Front
Post 1 035 Cap Nut M8 4
014 Magnetic Brake Cable 1 036 Washer Ø8xØ16x1.5T 8
015 Extension Sensor Wire
L=1250mm 1 037 Belt Pulley Shaft Ø12x90mm 2
016 Hand Pulse Sensor 2 038 Curve Washer Ø21xØ8x2t 10
017 Hand Pulse Sensor Wire
L=600mm 2 039 Hexagon Socket Head Bolt M8x42mm 4
018 Washer Ø8xØ38x2.0T 2 040 Nylon Locknut M8 7
019 Front Stabilizer End Cap Ø60 2 041 Hexagon Socket Head Bolt
M10x80mm 2
020 Rear Stabilizer End Cap Ø60 2 042 Flat Washer Ø10xØ19x1.5t 8
021L Left Cover 1 043 Carriage Bolt M6x45mm 4
PARTSLIST
6

No. Description Qty No. Description Qty
044 Nylon Locknut M10 3 070 Wave Washer Ø16.2xØ25x0.5t 2
045 Nylon Locknut M6 4 071 Washer Ø8xØ25x2.0T 2
046 Washer Ø6xØ14x1.0t 6 072 Hexagon Socket Head Bolt
M8x54mm 2
047 Tension Bracket & Eyebolt Set I 4 073 Hexagon Socket Head Bolt
M8x50mm 1
048 Washer Ø10xØ20x3.0T 6 074 Hexagon Head Bolt M10x32 1
049 Nut 3/8"x26tx6mm 4 075A Foot Bar Cover-A 2
050 Plastic Bushing Ø19xØ38x64mm 2 075B Foot Bar Cover-B 2
051 Washer Ø19.5xØ38x0.5T 2 076 Nylon Nut M5 2
052 Bushing Ø10x32x2.5 4 077 Bolt M5x12mm for Sensor
Bracket 1
053 Hexagon Socket Head Bolt
M8x18mm 4 078 Bolt M5x60mm 1
054 Bushing Ø16.3x22.4 4 079 Washer Ø12xØ17x1.0T 4
055 Bushing Ø19x38 4 080 Spring Washer 8mm 8
056 Bolt M6x12mm 2 081 Plastic washer Ø20.1xØ41.8x4T 1
057 Tension Bracket & Eyebolt Set II 2 082 Steel bearing 6004-2RS 2
058A Handrail Arm Cover-A 2 083 Inner C Ring Ø12 4
058B Handrail Arm Cover-B 2 084 Wave Washer Ø12xØ17x0.2T 2
059 Round Head Self Tapping Screw
M4.5x15mm 18 085 Conical Washer Ø8.15xØ11x3.5 4
060 Decorate Cover Ø60 1 086 Bushing Ø12xØ18x11.5 4
061 Decorate Cover □30x60 1 087 Self Tapping Screw M4x20mm 2
062 Bearing R12 2 088A Upper Crank Cover A 2
063 Self Tapping Screw M5x15mm 4 088B Upper Crank Cover B 2
064 Washer Ø19.5xØ25x2.0T 2 089 Wire Plug 1
065 Nut M10 2 090 Magnet 9
066 Inner C Ring Ø19 1 091 Spring 0.8x13 1
067 Washer Ø19.5xØ25x3.0T 2 092 Sensor Magnet Ø15x7mm 1
068 Round Head Self Tapping Screw
M4.5x25mm 5 093 Sensor Bracket 1
069 Bolt M5x12mm 6 094 Belt 330 J4 1
7
PARTSLIST

No. Description Qty No. Description Qty
095 Belt 855 PK5 1 104 Belt Pulley Bracket 1
096 Washer Ø20.5xØ25x1T 3 105 Hexagon Socket Head Bolt
M8x12mm 3
097A U Shape Bracket Cover A 2 106 C-ring Φ20 2
097B U Shape Bracket Cover B 2 107 Washer Ø19.5xØ25x0.5T 1
098 Motor 1 108 U Shape Plate 1
099 Power Supply Cable 100mm 1 109 Hexagon Socket Head Bolt
M8x15mm 8
100 Adaptor w/Cable 1 110 Hexagon Socket Head Bolt
M8x10 3
101 Bottle Holder 1 111 Wave washer 21x27x0.3T 1
102 Computer 1 112 Idle wheel fixture 1
103 Bolt for Computer 4 113 Spring Φ2.6x18 1
8
PARTSLIST

9
(#36) Washer
4 PCS
(#39) Hexagon Socket
Head Bolt
4 PCS
(#40) Nylon Locknut
4 PCS
(#43) Carriage Bolt
4 PCS
(#45) Nylon Locknut
4 PCS
(#46) Washer
4 PCS
(#51) Washer
2 PCS
(#53) Hexagon Socket
Head Bolt
4 PCS
(#70) Wave Washer
2 PCS
(#71) Washer
2 PCS
Multi Hex Tool with
Phillips Screwdriver
1 PC
Allen Wrench
1 PC
(#18) Washer
2 PCS
(#34) Carriage Bolt
4 PCS
(#35) Cap Nut M8
4 PCS
(#59) Round Head Self
Tapping Screw
10 PCS
(#41) Hexagon Socket
Head Bolt
2 PCS
(#42) Flat
Washer
(#44) Nylon Locknut
2 PCS
HARDWARE
&
TOOLS LIST

1. Front Stabilizer Installation.
Lift up the main frame (1) towards the front, and then align the Front Stabilizer (2) onto the
front curve of the Main Frame (1). Attach two Carriage Bolts (34) and on the other ends
of bolts with two Washers (36) and two Cap Nuts (35). Hold the Front Stabilizer (2) to the
Main Frame (1) and use the Multi Hex Tool with Phillips Screwdriver to tighten the Cap
Nuts (35) until firm and secure.
Hardware:
ASSEMBLY
10
(#36) Washer
2 PCS
(#34) Carriage Bolt
2 PCS
(#35) Cap Nut M8
2 PCS
Tool:
Multi Hex Tool with Phillips Screwdriver

2. Rear Stabilizer Installation.
Lift up the Main Frame (1) towards the end, and then align the Rear Stabilizer (3) onto the
rear curve of the Main Frame (1). Attach Two Carriage Bolts (34) and on the other ends
of bolts with two Washers (36) and two Cap Nuts (35). Hold the Rear Stabilizer (3) to the
Main Frame (1) and use the Multi Hex Tool with Phillips Screwdriver to tighten the Cap
Nuts (35) until firm and secure.
Hardware:
.
ASSEMBLY
11
(#36) Washer
2 PCS
(#34) Carriage Bolt
2 PCS
(#35) Cap Nut M8
2 PCS
Tool:
Multi Hex Tool with Phillips Screwdriver

3.Computer Installation
Insert the wires that come from the Computer (102) into the Handlebar Post (4), and pull it
out from the hole located on the right hand side of Front Post (4). Attach the Computer (102)
onto the top end of the Front Post (4) with four Cross Recessed Pan Head Bolts (103) that
were removed.
Use the Multi Hex Tool with Phillips Screwdriver to tighten the Cross Recessed Pan Head
Bolts (103) until firm and secure.
ASSEMBLY
12
Tool:
Multi Hex Tool with Phillips Screwdriver









MUSTTIGHTENINSEQUENCE:A,B,C,D,E,F,G,H.
4. Assemble Front Post.
Use the Allen Wrench to remove eight Hexagon Socket Head Bolts (109), eight Spring
Washers (80), and eight Curve Washers (38) from the Front Post (4).
Connect the Computer Wire (12) from the Front Post (4) with the Extension Sensor Wire (15)
from the Main Frame (1). Insert the Front Post (4) into Main Frame (1). Make sure the
wire stay connected. Tighten the eight Hexagon Socket Head Bolts (109), eight Spring
Washers (80), and eight Curve Washers (38) by Allen Wrench.
13
Allen Wrench
Tool:
ASSEMBLY

5. Assemble Handlebar.
A. Use Allen Wrench to remove two Hexagon Socket Head Bolts (32) and two Curve
Washers (38) from the Front Post (4).
Take off the Wire Plug (89) from the right hand side of the Front Post (4).
B. Put Hand Pulse Sensor Wires (17) from the Handlebar (5) through the Wire Plug (89).
Then connect the wires that come from the console where located on the right hand side
of the Front Post (4). Pull the Hand Pulse Sensor Wires (17) from the top end of the
handle bar (5). Attach the Wire Plug (89) back to the Front Post (4).
C. Attach the Handlebar (5) on top of the Front Post (4), and then tighten the two Hexagon
Socket Head Bolts (32) and two Curve Washers (38) by Allen Wrench. Make sure it’s
firm and secure.
14
ASSEMBLY
Allen Wrench
Tool:

6. Assemble Upper Handrails and Handrail Arms: “R” for right side and “L” for
left side.
A. Insert the Upper Left Handrail (6L) into Left Handrail Arm (7L), tighten with two Hexagon
Socket Head Bolts (39) and two Nylon Locknuts (40) by Allen Wrench and Multi Hex
Tool with Phillips Screwdriver.
B. Repeat the same Handrail assemble steps for the right side.
Hardware:
15
ASSEMBLY
Allen Wrench
Tool:
Multi Hex Tool with Phillips Screwdriver
(#39) Hexagon Socket
Head Bolt
4 PCS
(#40) Nylon Locknut
4 PCS

7. Assemble Upper Handrails and Front Post: “R” for right side and “L” for left side.
Insert Plastic Bushings (50) on both sides of the central axis on the Front Post (4). Attach
Washers (51) behind them. Insert the Upper Left/Right Handrails (6L, 6R) onto both sides
of the central axis on the Front Post (4). Tighten them with two Hexagon Socket Head
Bolts (53) and two Washers (18) to the front post by using Allen Wrench until firm and
secure.
Hardware:
16
ASSEMBLY
(#51) Washer
2 PCS
(#18) Washer
2 PCS
(#53) Hexagon Socket
Head Bolt
2 PCS
Allen Wrench
Tool:

8. Assemble Foot Pedals: “R” for right side and “L” for left side.
A. Place the Left Foot Pedal (22L) on top of the Left Foot Bar (9L), align to the bolt hole
with two Carriage Bolts (43) two Washes (46) and two Nylon Locknuts (45) by using
Multi Hex Tool with Phillips Screwdriver.
B. Repeat the same assemble steps to the Right Foot Bar (9R).
Note: There are four holes on the Left/Right Foot Bars (9L, 9R) for personal foot pedal
adjustment use.
Hardware:
17
ASSEMBLY
Tool:
Multi Hex Tool with Phillips Screwdriver
(#43) Carriage Bolt
4 PCS
(#45) Nylon Locknut
4 PCS
(#46) Washer
4 PCS

9. Assemble Foot Bars: “R” for right side and “L” for left side.
A. Insert the U shape bracket (8) at the back of the Left Foot Bar (9L) into the left Crank
(10). Then attach one Wave Washer (70), following with another Washer (71), at the
end lock it with one Hexagon Socket Head Bolt (53). Tighten it by using an Allen
Wrench until firm and secure.
B. Repeat the same assemble steps on the above for the Right Foot Bar (9R).
Hardware:
18
ASSEMBLY
(#53) Hexagon Socket
Head Bolt
2 PCS
(#70) Wave Washer
2 PCS
(#71) Washer
2 PCS
Allen Wrench
Tool: