EXFO FOT-930 MaxTester User manual

FasTesTTM: three-wavelength measurement of optical loss,
ORL and fiber length in 10 seconds
All-in-one portable test solution: up to eight instruments combined
in a single, eye-catching handheld package
FTTx ready: allows for the testing of passive optical networks (PONs)
at 1310 nm, 1490 nm and 1550 nm, the three wavelengths
recommended by the ITU-T (G.983.3) for PONs
Cost of ownership: lowest in the industry, thanks to three-year
warranty and recommended calibration interval, error-free testing
and minimized training time
Telecommunications Test and Measurement
www.megahz.com
MULTIFUNCTION LOSS TESTER
FOT-930 MaxTester
930
NETWORK TESTING
Mega Hertz

EXFO’s Next-Generation MaxTester: Much More
Features, Much Bigger Performance
The new FOT-930 MaxTester Multifunction Loss Tester is designed to help network service providers address CAPEX and OPEX issues, enable installers
to easily adapt to all network types, and provide CATV operators with a single-unit solution to their backreflection, fiber-length, high-power and bidirectional
loss measurement needs. Combined with its video fiber inspection probe, this unit also enables the easy detection of dirty or damaged connectors,
providing a clear view of connectors and fiber ends on the FOT-930’s high-resolution display.
FOT-930 MaxTester
With countless configurations available, the
FOT-930 MaxTester is the handheld unit of
choice for today’s network service providers,
fiber-optic network installers/contractors and
CATV operators.
All-in-one unit: combines up to eight instruments
Loss meter
Power meter
Optical return loss (ORL) meter
Visual fault locator
Multimode and singlemode light sources
Digital talk set
Fiber length tester
Video fiber inspection probe
FasTesT function*: one-touch,
automated measurements in 10 seconds
Bidirectional loss and ORL testing at up to
three singlemode wavelengths
Bidirectional loss testing at two multimode
wavelengths
Fiber length measurement
Flexible solution: five-wavelength multimode
and singlemode configurations meeting the
requirements of installers/contractors for all
test situations
Up to three singlemode wavelengths—
1310, 1550 and a choice between 1490
and 1625 nm—on one port
Two multimode wavelengths—850 and
1300 nm—on a second port
Future-proof: next-generation features meeting
the latest industry requirements
User-configurable pass/fail thresholds that can
be adjusted to different industry standards
FTTx ready, allowing for the testing of
passive optical networks (PONs) at 1310,
1490 and 1550 nm, the three ITU-T
G.983.3 recommended wavelengths
for PONs
Cost of ownership: lowest on the market
Three-year warranty and recommended
calibration interval
Error-free testing achieved through visual
loss and ORL pass/fail analysis
Minimized training time, thanks to a single
user interface for the eight instruments
included in this all-in-one unit
Easy to use and ergonomic: built for today’s
fiber-optic test requirements
Handy, eye-catching and rugged handheld
package
High-resolution color display
Complete data management and report
generation
Nine hours power autonomy provided by
field-swappable rechargeable batteries
*Protected by US patent(s) 5,305,078 and/or 5,455,672.

FTTx-Ready: Optimized for Testing
Passive Optical Networks (PONs)
FOT-930 MaxTester
The FOT-930 allows for automated, bidirectional loss and ORL testing of passive optical networks (PONs) at 1310 nm, 1490 nm and 1550 nm, the three
wavelengths recommended by the ITU-T (G.983.3) for PONs.
FTTx-Mode Operation
This mode lets you configure your FOT-930 MaxTester to suit your FTTx
wavelengths and test-unit locations, as well as choose your preferred data
presentation options for on-screen display or report generation. Key benefits
include:
Display of test data according to FTTx terminology
Similar test-data presentation, regardless of the location of master and
remote units
Integrated Data Storage Management
This feature enables the FasTesT initiator to save results on a remote unit—even when multiple remote units are used. Key benefits include:
The possibility to store test data in a single unit
Easier data post-processing and transfer from the FTB-3930 module (see Figure below)
Point-to-Multipoint Testing with Multiple Referencing
Implemented in the FTB-3930 MultiTest Module, multiple referencing lets you coordinate the FTB-3930 with up to 10 remote FOT-930 MaxTester units.
Key benefits include:
First-class efficiency, as several technicians can simultaneously install and test distribution fibers

A Single Tool for All Backreflection,
Fiber-Length and Loss Measurement Needs
FOT-930 MaxTester
Because learning how to operate only one instrument is easier and much faster, test
specialists should choose an all-in-one tool that enables them to perform tasks such as
installing long-haul high-speed networks, testing 1310/1490/1550 nm transmission in
FTTH networks, performing multimode testing in enterprise networks, etc.—a do-it-all
solution such as the FOT-930 MaxTester.
Key Advantages for All Network Types
Fast, three-wavelength loss and ORL testing
User-configurable pass/fail thresholds for error-free testing
The only unit designed for testing both multimode and singlemode fiber
Video fiber inspection probe, for easy viewing of connectors and fiber ends on the
FOT-930’s high-resolution display
GeX detector, for high-power measurement up to +26 dBm
Complete report generation capabilities
Talk set and VFL options
Ease of use, for faster testing, reduced training, minimum error potential, etc.
In 10 seconds, the MaxTester’s FasTest function provides
insertion loss and ORL values for up to three wavelengths
including either 1490 or 1625 nm on a single port.
Talk Set Port
For crystal-clear voice communication.
Power Meter Detector Port
Compatible with almost every connector on
the market. Manually and efficiently perform
power and loss testing. Accurately
measure power up to +26 dBm.
FasTesT Ports
Perform loss, ORL and fiber length
measurements for up to three SM
wavelengths on one port, and for two MM
wavelengths on a second port.
VFL
Built-in 650 nm visual fault location on a
universal connector.

FOT-930 MaxTester
KEY FEATURES
Two FasTesT ports: a three-wavelength singlemode port, including either 1625 or 1490 nm,
and a two-wavelength multimode port, for a total of up to five wavelengths
Automatic measurement of ORL and fiber length during FasTesT
Visual loss and ORL pass/fail analysis
Field-swappable rechargeable batteries
Easily accessible connectors
Large 320 x 240 color screen
Storage of over 1000 complete test reports, with automated report generation
Options: high-power detector, talk set, visual fault locator (VFL) and video fiber inspection probe
No offset nulling required
Internal InGaAs FasTesT detector
While performing FasTesT measurements, the FOT-930 can launch
automated loss and ORL measurements on all three wavelengths and
perform fiber-length measurements.
The FOT-930’s Windows-like, 320 x 240 color interface provides first-class
user-friendliness.
The FOT-930 lets you use a high-power source, a high-power power meter,
as well as a talk set and visual fault locator combination, all at once.
The video fiber inspection probe enables quick, easy
inspection of fiber ends or connectors. View is displayed on
the FOT-930’s high-resolution display.

Full Report Generation in a Snap
FOT-930 MaxTester
The FOT-930’s software automatically sets up test data in an easy-to-read, well-organized table.
Testing is simplified thanks to the highly intuitive user interface and integrated test functions, taking
software user-friendliness to the next level.
Select predefined test parameters and pass/fail thresholds
Customize user settings and cable identification parameters
Add operator comments
Generate reports for ORL, bidirectional loss (three wavelengths) and fiber length measurement
Report Generation
Growing fiber deployment in NSP and CATV networks sometimes leads installation companies to hire
subcontractors. These subcontractors must produce proper test documentation to corroborate the
tests were performed as specified.
EXFO’s FOT-930 MaxTester easily and efficiently provides complete, high-quality test documentation.
Its data logging and management features help users quickly access and download test results to any
PC through the RS-232 port for in-depth analysis and first-class report generation.
Online Help Menu and Multilingual Interface, for Enhanced
User-Friendliness
The FOT-930 MaxTester features a comprehensive, easy-to-use on-line help
menu providing all the necessary information required for highly efficient
instrument operation—an advantage offered by no other test unit on the market.
This feature contributes to the FOT-930’s unequaled user-friendliness.
The FOT-930’s interface is available in six languages: English, Simplified
Chinese, Spanish, French, German and Czech. This allows users to choose their
preferred language, further reduce training and testing time.
Display comprehensive test results thanks to ToolBox
data management software.
The FOT-930 quickly provides you with full
FasTesT reports.
The online help menu and choice of interface language significantly
increase user efficiency.

FOT-930 MaxTester
SPECIFICATIONS1
External Power Meter FOT-932 FOT-932X FOT-933
Detector type Ge GeX InGaAs
Measurement range (dBm) 10 to −70 26 to −55 6 to −73
Range displayed (dBm) Down to −77 Down to −65 Down to −80
Uncertainty2, 3 ± 5 % ± 0.1 nW ± 5 % ± 3 nW ± 5 % ± 0.05 nW
Wavelength range (nm) 800 to 1650 800 to 1650 800 to 1650
Display resolution2(dB) 0.01 0.01 0.01
Calibrated wavelengths 40 42 40
Recommended recalibration period (years) 3 3 3
Automatic offset nulling4Yes Yes Yes
Measurement-distance units kilometers, meters, kilofeet, feet, miles
Sources Standard −4−5−12C (second port) −12D (second port)
Wavelengths5(nm) 1310 ± 20 1310 ± 20 1310 ± 20 850 ± 25 850 ± 25
1550 ± 20 1550 ± 20 1490 ± 10 1300 +50/–10 1300 +50/–10
1625 ± 10 1550 ± 20
Emitter type Laser Laser Laser LED LED
Minimum output power5(dBm) −1/−1−1/−4/−7−1/−7/−4−30/−30 (50/125 µm) −24/−24 (62.5/125 µm)
Spectral width6(nm) ≤5/≤5 ≤5/≤5/≤5≤5/≤5/≤5 50/135 50/135
Stability7(8 hours) (dB) ± 0.05 ± 0.05 ± 0.05 ± 0.05 ± 0.05
FasTesT Standard −4−5−12C (second port) −12D (second port)
Wavelengths (nm) 1310 1310 1310 850 850
1550 1550 1490 1300 1300
1625 1550
Loss range8(dB) 60 56 56 40 46
Loss precision9(repeatability) (dB)
side-by-side 0.15 0.15 0.15 0.15 0.15
loopback 0.25 0.25 0.25 0.25 0.25
Length measurement range (km) 200 200 200 5 5
Length measurement uncertainty10 ± (10 m + 1 % x length)
Dedicated ORL All SM Wavelengths
ORL range (APC / UPC) (dB) 65/55
ORL uncertainty11 (dB) ± 0.5
Resolution2(dB) 0.01
General Specifications
Size (H x W x D) 25.0 cm x 12.5 cm x 7.5 cm (9 7/8 in x 4 15/16 in x 3 in)
Weight 1 kg (2.2 lb)
Temperature operating –10 °C to 50 °C (14 °F to 122 °F)
storage13 –40 °C to 70 °C (–40 °F to 158 °F)
Storage Capacity of 1024 complete tests
Relative humidity 0 % to 95 % non-condensing
Power9Li-ion battery (9 hours)
3 hours to fully recharge when unit is off
Warranty (years) 3
Standard Accessories
User guide, AC adapter/charger, 2 Li-ION batteries, shoulder strap, Certificate of Calibration.
Talk Set
Emitter type Laser
Wavelength (nm) 1550 ± 20
Dynamic range at 1550 nm (dB) 45
Dynamic range MM12 (dB) 40
VFL9
Emitter type Laser
Wavelength (nm) 650
Output power (dBm) 3
Notes
1. At 23 °C ± 1 °C and 1550 nm with FC connector and on batteries, unless otherwise
specified.
2. Resolution, uncertainty and linearity are functions of input power; uncertainty is valid at
calibration conditions.
3. Traceable to NIST; up to 20 dBm for GeX.
4. Power of > −45 dBm for Ge, > –30 dBm for GeX and > –57 dBm for InGaAs.
5. In High source mode.
6. As defined by Telcordia TR-TSY-000887, rms for lasers and at −3 dB for LEDs; typical
values for LEDs.
7. After a warm-up time of 6 minutes, in CW source mode.
8. Typical value, at 1550 nm for SM and 850 nm for MM.
9. Typical value.
10. For fiber length ≤120 km.
11. Typical value.
12. For graded-index MM fibers, typical.
13. Without batteries.

Find out more about EXFO's extensive line of high-performance portable instruments by visiting our website at www.exfo.com.
Rugged Handheld Solutions
OLTS
Power meter
Light source
Talk set
Optical Fiber
OTDR
OLTS
ORL meter
Switch
DWDM Test Systems
OSA
PMD analyzer
Chromatic dispersion analyzer
Multiwavelength meter
Transport/Datacom
10/100 and Gigabit Ethernet
SONET/SDH (DS0 to OC-192c)
SDH/PDH (64 kb/s to STM-64c)
SAN
FOT-930 MaxTester
SPFOT930.9AN © 2005 EXFO Electro-Optical Engineering Inc. All rights reserved. Printed in Canada 05/02
EXFO is certified ISO 9001 and attests to the quality of these products. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. EXFO
has made every effort to ensure that the information contained in this specification sheet is accurate. However, we accept no responsibility for any errors or omissions, and we
reserve the right to modify design, characteristics and products at any time without obligation. Units of measurement in this document conform to SI standards and practices.
Contact EXFO for prices and availability or to obtain the phone number of your local EXFO distributor.
For the most recent version of this spec sheet, please go to the EXFO website at http://www.exfo.com/specs
In case of discrepancy, the Web version takes precedence over any printed literature.
ORDERING INFORMATION
FOT-93X-XX-XX-XX-X-XX
Model
FOT-932= Ge detector, dual-wavelength 1310/1550 nm
FOT-932-4 = Ge detector, triple-wavelength 1310/1550/1625 nm
FOT-932-5 = Ge detector, triple-wavelength 1310/1490/1550 nm
FOT-932X = GeX detector, dual-wavelength 1310/1550 nm
FOT-932X-4 = GeX detector, triple-wavelength 1310/1550/1625 nm
FOT-932X-5 = GeX detector, triple-wavelength 1310/1490/1550 nm
FOT-933= InGaAs detector, dual-wavelength 1310/1550 nm
FOT-933-4 = InGaAs detector, triple-wavelength 1310/1550/1625 nm
FOT-933-5 = InGaAs detector, triple-wavelength 1310/1490/1550 nm
FTB-932-MM = Ge detector (with multimode second source only)5
If VFL option is available
LASER RADIATION
AVOID DIRECT EYE EXPOSURE
CLASS 3R LASER PRODUCT
IEC 60825-1:1993+A2:2001
21 CFR 1040.10
λ: 650 ±10 nm
Pout maximum < 5mW (into free space)
Second Source
00 = Without second source
12C = 850/1300 nm LED 50/125 µm
12D = 850/1300 nm LED 62.5/125 µm
Talk Set and Visual Fault Locator4
00 = Without talk set and VFL
VFL = With visual fault locator
VFT = With talk set and VFL2(universal 2.5 mm connector)
Connector*
EI-EUI-28 = UPC/DIN 47256
EI-EUI-76 = UPC/HMS-10/AG
EI-EUI-89 = UPC/FC narrow key
EI-EUI-90 = UPC/ST
EI-EUI-91 = UPC/SC
EI-EUI-95 = UPC/E-2000
EA-EUI-28 = APC/DIN 472561
EA-EUI-89 = APC/FC narrow key1
EA-EUI-91 = APC/SC1
EA-EUI-95 = APC/E-20001
Software Language
A= English
C= Simplified Chinese
E= Spanish
F= French
G= German
X= Czech
Fiber Inspection Probe
00 = Without probe
FP = Probe option and connection cable
FP1 = Probe connection cable and 200x probe3
FP5 = Probe connection cable and 200x/400x probe3
Notes
1. Not available with second source.
2. Not available with triple-wavelength model equipped with second source.
3. Comes with FIPT-U25M for 2.5 mm connectors, FIPT-FC and FIPT-SC for bulkhead connectors.
4. Connector type for the talk set is the same as the one specified for the main source.
5. Second source must be selected.
Safety
21 CFR 1040.10 and IEC 60825-1:1993+A1:1997+A2:2001:
Emitters used for sources, FasTesT, ORL and talk set
CLASS 1 LASER PRODUCT
CLASS 1 LED PRODUCT
The FOT-930’s optional VFL is a Class 3R laser product. Output power level is lower than the maximum specified on label.
Refer to specifications for output power.
Example: FOT-932X-4-VFL-FP-A-EI-EUI-89
*EXFO Universal Interface is protected by US patent 6,612,750.
Distributed by: Mega Hertz
800-883-8839 [email protected] www.megahz.com