Exposure Lights OLAS Float-On User manual

CHARGING
OLAS APP
An OLAS integrated pocket torch and water activated Man Overboard strobe.
Man Overboard Technology (MOBT)
Your OLAS Float-On is a oating water activated strobe. The strobe will switch on within 8 seconds of being
submerged. The strobe will switch off after 20 seconds of no water connection.
Man Overboard Technology is active when the bi-colour LED ashes green twice every 60 seconds. When a
charge is required the LED is solid red.
Charge your Float-On fully before rst use
WARNING: Ensure your light is totally dry and salt free before charging.
1. Insert Exposure Lights charger cable.
2. The LED will ash green whilst charging.
3. When the battery is fully charged the LED will turn solid green.
4. Charge time 1.5 hours from a 500mA power source.
OLAS – Your personal man overboard alarm
Download ‘OLAS’ from the App Store or Google Play. The OLAS application connects the Float-On to any
mobile device which has the OLAS application downloaded.
How to activate OLAS in your Float-On:
1. Press and hold the button for 4 seconds, the LED will strobe once and then turn green for 4 seconds. OLAS is ON.
2. Open the OLAS application.
3. The application will ask you to sync the light. Click OK.
4. Your Float-On is now connected to your phone.
From the OLAS application you can adjust connection settings, personalize the name and manage other
OLAS products.
When the connection between the mobile device and the Float-On are broken for longer than 8 seconds an
Alert will occur on the mobile device, activating the man overboard screens. To test the range walk away
from the light holding your mobile device until the alert occurs.
When the MOBT strobe is activated the OLAS connection will be broken, setting off the alarm.
Deactivating OLAS:
1. Open the OLAS application.
2. Deactivate the Float-On in the tags screen. NOTE: This does not stop OLAS transmitting from the
Float-On.
3. Press and hold the button on your Float-On for 4 seconds, the LED will strobe once and then turn red for 4
seconds. OLAS is OFF.
USER GUIDE
FLOAT-ON
GB

LIGHT OPERATION & BATTERY LIFE
Any change or modication to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
instillation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio Communications.
Ensure your phone or tablet has maximum volume, charged battery, GPS ON and Bluetooth ON.
Exposure Lights are very powerful lighting systems. Always take care when operating. Do not look directly
into the light. This may cause serious injury. Do not shine directly at others. Exposure Lights / Ultimate
Sports Engineering Ltd. accept no liability for any injuries or other damages arising from the use of their
product in any circumstances.
We design them. We make them. We are here to help.
If you are experiencing any problems with your Exposure Light or accessories please contact us directly at:
Service: [phone] | [email protected]
Alternatively contact your Exposure Dealer or Distributor.
Check web for details www.exposurelights.com
Sleep mode - Only for storage.
Sleep mode will deactivate Man Overboard Technology and OLAS.
1. From OFF press and hold the button for 10 seconds.
2. After 10 seconds the bi-colour LED will ash red 3 times.
Press the button to reactivate Man Overboard technology.
LED COLOUR BATTERY %
GREEN 100 - 50
AMBER 50 - 25
RED 25 - 5
RED FLASH 5 - EMPTY
LIGHT OPERATION ACTION
SWITCH ON DOUBLE PRESS THE BUTTON
CHANGE MODE SINGLE PRESS THE BUTTON
SWITCH OFF PRESS AND HOLD THE BUTTON FOR 2 SECONDS
STROBE PRESS AND HOLD THE BUTTON FOR 2 SECOND
SLEEP MODE (deactivate OLAS and MOBT, ONLY for storage) PRESS AND HOLD THE BUTTON FOR 10 SECONDS
MODE RUNTIME (HOURS)
HIGH 1.5
MEDIUM 4
LOW 12
STROBE 20
STANDBY WITH MOBT AND OLAS ACTIVE 720
STANDBY WITH MOBT ACTIVE 1440
WARNING & WARRANTY

FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) this device may not cause harmful interference, and 2)
this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.